![]() | Home > Maintenance & Modifications > clatter clatter....could it be..... |
![]() ![]() |
|
|
munch90 Member Since: 26 Oct 2013 Location: guildford Posts: 3558 ![]() ![]() |
Brand new not secondhand and tested !
The shafts might not be heat treated properly ![]() |
||
![]() |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6324 ![]() ![]() ![]() |
![]() Wtf! How do I check? ![]() You stinker |
||
![]() |
|
munch90 Member Since: 26 Oct 2013 Location: guildford Posts: 3558 ![]() ![]() |
Strip the axle and run a file over the shafts if it leaves a mark they soft !
![]() |
||
![]() |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6324 ![]() ![]() ![]() |
I so hope it's all sorted now and really looking forward to my hols in Spain.
|
||
![]() |
|
Dora Member Since: 12 May 2015 Location: South East Posts: 170 ![]() ![]() |
![]() ![]() ![]() |
||
![]() |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6324 ![]() ![]() ![]() |
![]() |
||
![]() |
|
munch90 Member Since: 26 Oct 2013 Location: guildford Posts: 3558 ![]() ![]() |
may your journey be clatter free
fingers crossed ! ![]() |
||
![]() |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6324 ![]() ![]() ![]() |
Just been and given it a good old wobble and we're clatter free
![]() |
||
![]() |
|
Happyoldgit Member Since: 14 Sep 2007 Location: Norfolk Posts: 3471 ![]() ![]() ![]() |
How long before the next exciting instalment of Caterham's Capers?
Tick tock, tick tock, tick tock.. Steve. Owned numerous Land Rover vehicles of all shapes and sizes over the decades. Current Defender: A non tarts hand-bagged Puma 110 XS USW. [Insert something impressive here such as extensive list of previous Land Rovers or examples of your prestigeous and expensive items, trinkets, houses, bikes, vehicles etc] http://forums.lr4x4.com I used to be Miserable ...but now I'm ecstatic. |
||
![]() |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6324 ![]() ![]() ![]() |
Where would you like to start?
I've noticed recently the drivers door card is rattling too much..... Could this be linked to the brake lamp blowing and therefore impacting on the Ecm and poor engine running? ![]() No.....The door card is rattling but suspect it might just be the fir trees have broken free as many of them were glued on? Oh well no biggie. ![]() |
||
![]() |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6324 ![]() ![]() ![]() |
![]() ![]() Can't wait for the autopsy on the old axle. Suspect at least the diff was dodgy. ....almost forgot to say a huge thank you to IRB. New axle, new Bilstein all round and a few other bits where old stuff was looking well tired. All carefully done under my watchful eye - obviously I taught him a thing or two about defenders while it was up in the air. Ie how fir tree clips evolved from inter-galactic communications etc. Anyway very much looking forward to Spain and putting some trouble free miles on the clock. ![]() Click image to enlarge |
||
![]() |
|
willy eckerslike Member Since: 15 Jun 2009 Location: North yorks Posts: 1789 ![]() ![]() ![]() |
At last a major break through ![]() 110 HCPU Tipper |
||
![]() |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6324 ![]() ![]() ![]() |
![]() |
||
![]() |
|
blackwolf Member Since: 03 Nov 2009 Location: South West England Posts: 17668 ![]() ![]() ![]() |
So are you going to carry out a necropsy on the old axle?
We want to know what was causing the clunk! |
||
![]() |
|
Caterham Member Since: 06 Nov 2008 Location: Birmingham Posts: 6324 ![]() ![]() ![]() |
I'm off on hols soon but one way or the other I think / hope it's going to get stripped and hopefully all will be revealed.
![]() will let you know. |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
