 | Home > Maintenance & Modifications > Corrosion Prevention Guide! |
 
|
|
|
| Cheshire110 Member Since: 26 Jul 2013 Location: Cheshire/London Posts: 2743  
|
Thanks for that, all very useful everyone.
Just had some 2foot lift steps made for my 110 so I can get under and spray everywhere easily! I strongly reccomend the HAMMERITE Stonechip with Waxoyl (black) combination in a can for high impact areas etc, done my diffs and a few other places in it, leaves a water resistant and non-chip coating which looks flat and clean too. Cheers, David Land Rovers of all shapes S3 onwards⦠Daily is a 110 V8. |
||
27th Jul 2013 1:00pm |
|
| lukev01 Member Since: 24 Mar 2012 Location: Bedfordshire Posts: 412  
|
 Have now contacted Zagato. 
Very excited (kid before Christmas) waiting for my 110 to arrive in September but also thinking that the first trip will be down to Zagato for the full treatment. 
Does anyone know of anywhere in the Bedfordshire area that will seal the windows properly? 1970 Series 2A 88" |
||
|
2nd Aug 2013 8:49pm |
|
| sweeney Member Since: 30 Jan 2012 Location: East sussex Posts: 55 
|
can anyone recommend someone in the south east who can do this type of work. I am picking up a new 90xs and would like to carryout some additional corrosion prevention. based in Tunbridge wells . I am not new to defenders I have had 10 but always change at 3 years, plan to keep this one !
|
||
|
5th Aug 2013 2:58pm |
|
| couplands Member Since: 31 Aug 2011 Location: Peak District & Cornwall Posts: 1826 
|
Killer90 aka CSK Land Rovers is down sarf ( south of Birmingham anyway) and does this type of thing. He'll be along soon...
http://www.csklandrovers.co.uk/ Cheers Simon |
||
|
5th Aug 2013 4:30pm |
|
| lukev01 Member Since: 24 Mar 2012 Location: Bedfordshire Posts: 412
|
Zagato is in the South East (Reigate, Surrey), no distance you.
You can PM him via this forum still. 1970 Series 2A 88" |
||
|
5th Aug 2013 5:15pm |
|
| sweeney Member Since: 30 Jan 2012 Location: East sussex Posts: 55
|
Yes I have sent him a pm |
||
|
5th Aug 2013 7:50pm |
|
| keith Member Since: 15 Aug 2012 Location: Edinburgh Posts: 2189 
|
The biggest tip i can give is to start NOW . Whilst the weather is hot and all underside parts are dry and clean . Theres been snow in October before . Be prepared .
|
||
|
5th Aug 2013 10:11pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20121
|
I'm going to look at doing mine in the next few weeks. I'm going to stonechip underneath. On areas with surface rust I assume this should lightly be removed and treated with a rust cure like the Hammerite one before adding stonechip? I do have some of this already.
I was thinking of using this: http://www.ebay.co.uk/itm/321134424033 Internally on top. Where exactly does it need to be added? Not done this before so pointers more than welcome. (Obviously I know to cover brakes and exhaust and the like from getting covered. Including myself) 
I would search but it's difficult to trawl though pages and pages for valuable info with general banter mixed in. NEVER SURRENDER! β½οΈπ’οΈπ¨βπ§π§°βοΈ RED, WHITE & BOOST! π¬π§ |
||
|
8th Aug 2013 6:12pm |
|
| sweeney Member Since: 30 Jan 2012 Location: East sussex Posts: 55
|
Zagato worked his magic on my new defender today
|
||
|
12th Aug 2013 8:39pm |
|
| Zagato Site Supporter Member Since: 08 Jan 2011 Location: Billingshurst West Sussex Posts: 5006
|
It was a pleasure Paul
Best way to do it, straight out of the showroom. I couldn't find my camera yesterday but you ought to put a picture up, she is a fully loaded impressive example in white and a rare one that I couldn't fault on build quality - finish, fit, paint etc. Just a note on the DIN02L kit from Rejel.com, I am consistently using two more underbody wax cans than is supplied in the kit so it would be a good idea to order a couple of extra cans with the kit
I really miss my Defender but I've been away sailing quite a bit along the south coast, some in really nasty conditions, coming through the Needles on your own in a force 5/6 is fun and thick fog through shipping channels gets your heart rate going!
Click image to enlarge
Although needing a reef in the sail, this was a more enjoyable trip though the Needles than the first time! Good enough conditions to be able to get the camera out anyway. Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated |
||
|
13th Aug 2013 7:36am |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20121
|
It's a pity Zag isn't around here anymore very often.
Anyway, Chassis holes.... Nitice obviously there is plenty if them. What do people do leave them as they are as standard? Plug a few select one's or the lot? There's also the large one's too I notice... Any thoughts? NEVER SURRENDER! β½οΈπ’οΈπ¨βπ§π§°βοΈ RED, WHITE & BOOST! π¬π§ |
||
|
15th Aug 2013 9:40pm |
|
| Sockpuppet Member Since: 17 Sep 2011 Location: Leicester Posts: 479
|
Plug most but leave some open so it can breathe / water can run out.
|
||
|
15th Aug 2013 10:44pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20121
|
That was what I was tending to think. Block too many and anything internal is made far far worse not block any and water and dirt will easily get in. The two larger holes either side under the rear wheel arches seem to fill with dirt and dust a lot.
I think I remember someone taped over them with duck tape or similar. NEVER SURRENDER! β½οΈπ’οΈπ¨βπ§π§°βοΈ RED, WHITE & BOOST! π¬π§ |
||
|
15th Aug 2013 10:53pm |
|
| Sockpuppet Member Since: 17 Sep 2011 Location: Leicester Posts: 479
|
What do people think for under the wheel arches. Just dinitrol black underseal or stone chip then dinitrol on top?
Do people spray all the panels underneath or just a select few? |
||
|
24th Aug 2013 11:40pm |
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
