↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Puma EGR blanking plate FREE :-)
Did this plate make any difference to your cars running.
Made no difference
20%
 20%  [2]
Made my car better and i will post the results
80%
 80%  [8]
Made my car worse and i will post the results
0%
 0%  [0]
Total Votes: 10

Post Reply  Down to end
Page 2 of 12 <123 ... 101112>
Print this entire topic · 
Verdone



Member Since: 30 Apr 2008
Location: Gent
Posts: 67
Belgium 2007 Defender 90 Puma 2.4 HT Java Black
mrwoo wrote:
AndrewS wrote:
CarlS left this morning at 06.00 drove to Scunthorpe then up to Newcastle Edinburgh and he is just going round the Dundee by-pass and all is well. MPG is up as well Thumbs Up


Any engine management lights on yet.

Cheers Rich


Hey mrwoo, i had the same thing as u it didnt pop up at the very first moment but only after a a few miles, i'll be getting a scanguage hopefully friday so i can read out the faults of the ecu and reset the management light and hopefully it wont reappear Whistle

We'll see how it goes but its nice to see u had the same positive results as me except for the light ofcourse Thumbs Up

U removed the blanking plate yet?

Greetings Verdone
Post #2399 12th Jun 2008 8:08pm
View user's profile Send private message View poster's gallery Reply with quote
mrwoo



Member Since: 03 Jan 2008
Location: Cheshire
Posts: 286
United Kingdom 2004 Defender 90 Td5 CSW Epsom Green
Yes, I put the normal gasket back in this evening. I'm hoping to that the light will go off after driving it a bit like Pete suggested. I look forward to hearing the ECU results when you find out more.
What I dont understand is that with the plate everything sounds normal with lights, why aren't there any lights for what I thought was a faulty EGR in the first place? Confused

I was wondering if disconnecting the cable off the EGR valve itself might get rid of the light?

cheers
Post #2400 12th Jun 2008 8:57pm
View user's profile Send private message View poster's gallery Reply with quote
Verdone



Member Since: 30 Apr 2008
Location: Gent
Posts: 67
Belgium 2007 Defender 90 Puma 2.4 HT Java Black
mrwoo wrote:
Yes, I put the normal gasket back in this evening. I'm hoping to that the light will go off after driving it a bit like Pete suggested. I look forward to hearing the ECU results when you find out more.
What I dont understand is that with the plate everything sounds normal with lights, why aren't there any lights for what I thought was a faulty EGR in the first place? Confused

I was wondering if disconnecting the cable off the EGR valve itself might get rid of the light?

cheers


Yeah beats me, and ive thought of that aswell, but thats gonna put the light on aswell Big Cry Wink

Ah well lemme know how it goes i'm leaving it on for now Thumbs Up

Greetings Verdone
Post #2402 12th Jun 2008 9:26pm
View user's profile Send private message View poster's gallery Reply with quote
Verdone



Member Since: 30 Apr 2008
Location: Gent
Posts: 67
Belgium 2007 Defender 90 Puma 2.4 HT Java Black
Ur light gone now mrwoo?

I'm still waiting for that scanguage Rolling Eyes

Greetings Verdone
Post #2406 14th Jun 2008 6:04pm
View user's profile Send private message View poster's gallery Reply with quote
mrwoo



Member Since: 03 Jan 2008
Location: Cheshire
Posts: 286
United Kingdom 2004 Defender 90 Td5 CSW Epsom Green
Verdone wrote:
Ur light gone now mrwoo?

I'm still waiting for that scanguage Rolling Eyes

Greetings Verdone


Yes, it's gone out again now after around 50 miles of driving. I think like Pete said it's needs around 3 driving cycles to clear it down.

Cheers Rich
Post #2414 15th Jun 2008 4:17pm
View user's profile Send private message View poster's gallery Reply with quote
Verdone



Member Since: 30 Apr 2008
Location: Gent
Posts: 67
Belgium 2007 Defender 90 Puma 2.4 HT Java Black
mrwoo wrote:
Verdone wrote:
Ur light gone now mrwoo?

I'm still waiting for that scanguage Rolling Eyes

Greetings Verdone


Yes, it's gone out again now after around 50 miles of driving. I think like Pete said it's needs around 3 driving cycles to clear it down.

Cheers Rich


So we can deffo say it hasnt damaged anything Thumbs Up

And hows the engine now, back to its old self again?

Greetings Verdone
Post #2415 15th Jun 2008 6:07pm
View user's profile Send private message View poster's gallery Reply with quote
bell-auto-services



Member Since: 08 Jul 2007
Location: North Yorkshire
Posts: 2232
United Kingdom 2013 Defender 110 Puma 2.2 USW Orkney Grey
It wont damage anything by blanking , at the worst it will do what its already done on some of them , put a light on that should auto clear once the ecu sees that its not a permanent DTC.

Because we know that the fault was caused by the blanking its not possibile for it to store as permanent so in every case it should as a mater of course clear its self.




Regards Pete
Post #2416 15th Jun 2008 7:28pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
dave's 110



Member Since: 11 Jun 2008
Location: Norfolk
Posts: 45
United Kingdom 2008 Defender 110 Puma 2.4 DCPU Stornoway Grey
Just looking how you fit this blanking plate I see the cup holder on top of the engine cover has a cap on it should they all have this as mine hasn't got one and didn't from new

IS it best to fit blanking plate if have ECU remap would it help run better ?

Dave
Post #2436 16th Jun 2008 7:27pm
View user's profile Send private message View poster's gallery Reply with quote
Verdone



Member Since: 30 Apr 2008
Location: Gent
Posts: 67
Belgium 2007 Defender 90 Puma 2.4 HT Java Black
dave's 110 wrote:
Just looking how you fit this blanking plate I see the cup holder on top of the engine cover has a cap on it should they all have this as mine hasn't got one and didn't from new

IS it best to fit blanking plate if have ECU remap would it help run better ?

Dave


Mine doesnt have that cap either mate but theres no use for it, just use for what u said as a cupholder or a place to put your screws while thinkering around in the engine bay, best thing about the ford engine Rolling with laughter Thumbs Up

Greetings Verdone
Post #2441 16th Jun 2008 9:40pm
View user's profile Send private message View poster's gallery Reply with quote
mrwoo



Member Since: 03 Jan 2008
Location: Cheshire
Posts: 286
United Kingdom 2004 Defender 90 Td5 CSW Epsom Green
ANY NEWS ON THE FAULT CODE YET? Thumbs Up
Post #2457 18th Jun 2008 8:00am
View user's profile Send private message View poster's gallery Reply with quote
Verdone



Member Since: 30 Apr 2008
Location: Gent
Posts: 67
Belgium 2007 Defender 90 Puma 2.4 HT Java Black
6 working days now and still no package, its coming from greece but still, im gonna send an e-mail because i need it Thumbs Up

I will let u know once i got it mrwoo Dog

Greetings Verdone
Post #2465 18th Jun 2008 4:21pm
View user's profile Send private message View poster's gallery Reply with quote
mrwoo



Member Since: 03 Jan 2008
Location: Cheshire
Posts: 286
United Kingdom 2004 Defender 90 Td5 CSW Epsom Green
Verdone wrote:
6 working days now and still no package, its coming from greece but still, im gonna send an e-mail because i need it Thumbs Up

I will let u know once i got it mrwoo Dog

Greetings Verdone


Thanks Verdone that's great.
Post #2470 18th Jun 2008 7:16pm
View user's profile Send private message View poster's gallery Reply with quote
Verdone



Member Since: 30 Apr 2008
Location: Gent
Posts: 67
Belgium 2007 Defender 90 Puma 2.4 HT Java Black
Mrwoo,

I got the scanguage and its a nice little handy thing, i found the error and deleted it and it stays gone for now, done a bit of driving already so hopefully it will stay away Cool

U can see lots of stuff on this scanguage, how much mpg etc etc u r getting, rmps, motor temperature, and the list goes on lol.

Anyways the engine is still going strong without the annoying rumble on tick over so i am VERY happy Twisted Evil

Oh the error was massflow air sensor in range but higher then expected so nuthing to worry bout Thumbs Up

Greetings Verdone
Post #2522 22nd Jun 2008 5:28pm
View user's profile Send private message View poster's gallery Reply with quote
bell-auto-services



Member Since: 08 Jul 2007
Location: North Yorkshire
Posts: 2232
United Kingdom 2013 Defender 110 Puma 2.2 USW Orkney Grey
Verdone are you running the standard air filter ??


Regards pete
Post #2523 22nd Jun 2008 5:45pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Verdone



Member Since: 30 Apr 2008
Location: Gent
Posts: 67
Belgium 2007 Defender 90 Puma 2.4 HT Java Black
Yeah didnt change anything there, i have a mantec snorkle though.


Greetings Verdone
Post #2524 22nd Jun 2008 6:08pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 2 of 12 <123 ... 101112>
All times are GMT + 1 Hour

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums