malibu wrote:

``mmbanf wrote:
atldef110 wrote:
I found a new feature today

- Activate Park Assist

EUCD-059 Parking Assistance
Standard: Without Parking Assistance
Change to: PDC (Front, Rear) - Parking (Parallel, Exit)

EUCD-099 Park Assist Camera
Standard: Without Park Assist Camera
Change to: With Park Assist Camera

EUCD-140 Pdcautoactivationmenu
Standard: Not supported
Change to: With PDC Auto Activation menu

MultiCAN-469 PDCAutoActivation
Standard: Not Supported
Change to: Default OFF configurable

MultiCAN-500 PDCBtnFCIM
Standard: Not supported
Change to: Fitted

MultiCAN-602 PDC
Standard: PDC not fitted
Change to: 10 Channel fitted ( Park Assist)

MultiCAN-786 Park Assist
Standard: Not Fitted
Change to: Full Auto VarD (Fully automated park assist with automated steering breaking accelaration and gears)

Have anybody able to activate Adaptive Cruise Control yet? Can anyone with ACC send me their CCF?


hi, very interesting!! thanks for sharing. have you tried this and it works without errors? Thumbs Up
``
I tried the parking assist the weekend. It worked perfectly, as in, the car finds parking spots and parks itself. Amazing. Yes I also get the brake warning and 2wd warning. Interesting, when I reset all the settings and restarted the car, everything worked perfectly with no warning, and park assist, until the next restart and then park assist disappeared.
I suspect when GAP work out the ACC, all the other options, such as ATPC, TR2 and Park assist will all work at once.

atldef110 wrote:

That’s exactly what happened to mine. Still with the brake error I was able to use it.
The feature park parallel or in a spot between two cars even if there is no car parked.
To activate the feature you should see a steering wheel on your Pivi above the camera, once you press that button, the car will start searching for an open parking spot while you drive around and it will show on your Pivi when a spot is found. Once it finds a spot, stop, press on the spot you want the car to park, press Start at the bottom of you Pivi and the car will start parking by itself. You won’t need to press gas or maneuver.

Hairy Dan wrote:

If you really want to change the engine power you can change the following

MultiCAN-580 GenericEngPwrOut
Market Limited Mid-Power Engine variant

MultiCAN-599 EnginePowerOutput
Engine Power Source - 200/430

Obviously change the setting to what you want, the above is from my standard car and obviously you do this at your own risk.

Does it work? Some say yes and some say no and I have been reliably informed that doing this can generate an error that your service department will be able to see when they plug it into Pathfinder, eg P167F (Non-OEM Calibration Detected) and P064F (Unauthorised Software/Calibration Detected). Some activation places are now offering a software remap so maybe they have worked out a way to bypass the Non-OEM Calibration/Unauthorised Software/Calibration errors but you would have to ask them that.

brucehun wrote:

For me all that’s missing now is ATPC and TR2. Everything else I activated working perfectly. I enjoy the walk away locking and approach unlocking. Doesn’t work with the activity key though.

hcarranzacr wrote:

I found that if I change speed limit I get a error faumous error "Emergency break error" i change to 210 and 250 and in boot I get the same error, went set to default value the issue is solve

• MultiCAN-564 MaxVehicleSpeed
LIMIT_191_KPH