atldef110 wrote:

Have anybody able to activate Adaptive Cruise Control yet? Can anyone with ACC send me their CCF?[/b]

Adamalli wrote:

Hey everyone... I broke down and had someone with pathfinder enable adaptive cruise today. And as were talking waiting for pathfinder to update everything, we started discussing the IIDTool and why it doesn't seem to work for adaptive cruise.

Apparently, even with pathfinder, CCF edits for adaptive cruise don't work the first time. And because of that if we stopped right then you would see the brake fault error we all get. For some reason the ECU that holds that info doesn't load the edits. That ECU holds all the info for the cruise radar, camera and braking that is related to those inputs, hence why we all get those errors. So what we had to do is go to the module that doesn't load the edits correctly the first time and tell the module to reload the central configuration file (CCF)(I think it pulls it from other modules on the car, not pathfinder). As soon as we did that the error cleared. No need to even let the car go to sleep.

I need to confirm which module it was, I think it was either the GWM (gateway module A) or the IDMA (Interactive Display Module A). The IDMA ECU module in the IIDTool has a relearn/load the central configuration option. I am pretty sure that has been discussed earlier in this thread.

Below are the items he changed for me via pathfinder. I had all these already accept adaptive cruise. I have bolded those needed for adaptive cruise. This is on a USA defender 110 2021 model.

I am curious if someone could make the adaptive cruise CCF edits below and then try the relearn/reload process and see if that clears the error. I can't really try it on mine since it is already working. Maybe someone has already tried that. Just thought I would through this out there incase it helps someone figure this out.

EUCD-129 Terrain Response Fitment Auto Terrain Response/JDO, Dynamic
EUCD-245 Dynamic-I Dynamic-i Content with Configurable Dynamic Mode Screen
MultiCAN-562 DynamicProgMode Available for selection with timeout
MultiCAN-566 MHLastUserMode Last user memory mode enabled
MultiCAN-579 TowAssist Tow Assist 2
MultiCAN-580 PTCruiseFitment ACC with Queue Assist fitted
MultiCAN-605 ConfigDynamicMode Fitted
MultiCAN-712 ACC Lead Car Dist Disp Fitted
MultiCAN-723 SMRF Global Close Enabled
MultiCAN-753 Adaptive Prog Mode Fitted
MultiCAN-777 Ter Dyn Select In FCPB Rotary used for selection within touch screen
MultiCAN-793 TA2 Input Control HVAC rotary
MultiCAN-795 TA2 Select In FCPB Rotary used for selection within touch screen
MultiCAN-809 ACC Stop Gap Setting Fitted

atldef110 wrote:

I found a new feature today

- Activate Park Assist

EUCD-059 Parking Assistance
Standard: Without Parking Assistance
Change to: PDC (Front, Rear) - Parking (Parallel, Exit)

EUCD-099 Park Assist Camera
Standard: Without Park Assist Camera
Change to: With Park Assist Camera

EUCD-140 Pdcautoactivationmenu
Standard: Not supported
Change to: With PDC Auto Activation menu

MultiCAN-469 PDCAutoActivation
Standard: Not Supported
Change to: Default OFF configurable

MultiCAN-500 PDCBtnFCIM
Standard: Not supported
Change to: Fitted

MultiCAN-602 PDC
Standard: PDC not fitted
Change to: 10 Channel fitted ( Park Assist)

MultiCAN-786 Park Assist
Standard: Not Fitted
Change to: Full Auto VarD (Fully automated park assist with automated steering breaking accelaration and gears)

Have anybody able to activate Adaptive Cruise Control yet? Can anyone with ACC send me their CCF?

hi, very interesting!! thanks for sharing. have you tried this and it works without errors?

mmbanf wrote:

atldef110 wrote:

I found a new feature today

- Activate Park Assist

EUCD-059 Parking Assistance
Standard: Without Parking Assistance
Change to: PDC (Front, Rear) - Parking (Parallel, Exit)

EUCD-099 Park Assist Camera
Standard: Without Park Assist Camera
Change to: With Park Assist Camera

EUCD-140 Pdcautoactivationmenu
Standard: Not supported
Change to: With PDC Auto Activation menu

MultiCAN-469 PDCAutoActivation
Standard: Not Supported
Change to: Default OFF configurable

MultiCAN-500 PDCBtnFCIM
Standard: Not supported
Change to: Fitted

MultiCAN-602 PDC
Standard: PDC not fitted
Change to: 10 Channel fitted ( Park Assist)

MultiCAN-786 Park Assist
Standard: Not Fitted
Change to: Full Auto VarD (Fully automated park assist with automated steering breaking accelaration and gears)

Have anybody able to activate Adaptive Cruise Control yet? Can anyone with ACC send me their CCF?

hi, very interesting!! thanks for sharing. have you tried this and it works without errors?

I've just tried it but unfortunately I get the automatic braking error  Cheers Ian
--------------------
22MY Defender 110 D200 SE, Fuji White.
Kielder 4x4 Safari
Instagram @defender_v8

Ratledge wrote:

The result I get for Park Assist is "Emergency Brake Assist Not Available". I do see the "Auto" switch under Driver Assistance / Parking.

Something is not quite right, but even resetting all params doesn't clear that error.

Also, telling the GAP tool to clear the error fails.

UPDATE:
—————
My cruise control and lane keep assist are not available and after driving a short distance I get the "two wheel drive" error.

I reset everything yet again, and I will have to give it the 15 minutes to reset.

o-ren-ishii wrote:

Hey all,

Still looking for the feature to disable interior lighting, computer etc going on when opening the backdoor.
Does anyone has an idea which eucd or multican this could be?

Would be greatly appreciated!