↓ Advertise on Defender2 ↓

Home > General & Technical (L663) > GAP Diagnostic IIDTool Announcement
Post Reply  Down to end
Page 58 of 104 <123 ... 575859 ... 102103104>
Print this entire topic · 
DefenderMidlands



Member Since: 08 Mar 2023
Location: West Midlands
Posts: 225

United Kingdom 
It works
In my car and I don’t have soft close doors.

I think you don’t want the soft close doors else it pulls it back shut.
Post #1009802 2nd Oct 2023 7:17pm
View user's profile Send private message View poster's gallery Reply with quote
chpsk8



Member Since: 26 Sep 2023
Location: Midwest
Posts: 42

United States 
That's interesting. I'm going to add this to mine this week. I skipped it assuming it was soft close only. Thanks for the clarification.

Nice thing about this one is it won't set off a brake error! Laughing

"edit": Added it last night... works as promised Thumbs Up

I had in my notes that it was for soft close only. How is this a feature that isn't enabled from the factory? Totally strange thought process.


Last edited by chpsk8 on 3rd Oct 2023 7:03pm. Edited 1 time in total
Post #1009831 2nd Oct 2023 8:42pm
View user's profile Send private message View poster's gallery Reply with quote
Steinzy



Member Since: 11 Jan 2023
Location: Gold Coast
Posts: 6

Australia 
I noticed in the latest Pivi update (4.1) it mentions updates to the assisted steering on the Adaptive Cruise - has anyone had a play with enabling assisted steering?

Adaptive Cruise Control with Steering Assist/ Lane Keep Assist:
(Please note: Not all of the below improvements are applicable to vehicles with only Lane Keep Assist)
– Smoother assisted steering for road layouts which include direction changes, lanes splitting and road marking transitions. Image processing improvements for surface estimation.
Post #1009859 3rd Oct 2023 7:41am
View user's profile Send private message View poster's gallery Reply with quote
vcrabz



Member Since: 05 Jan 2023
Location: Prague
Posts: 7

Czech Republic 
trying but without any success Sad
Post #1009861 3rd Oct 2023 8:10am
View user's profile Send private message View poster's gallery Reply with quote
LRD2023



Member Since: 03 Oct 2023
Location: Espoo
Posts: 3

Finland 
I have a GAP Tool BT from around 2015, do I need to update the firmware before using for L663 2023 (p400e)?
Post #1009862 3rd Oct 2023 8:11am
View user's profile Send private message View poster's gallery Reply with quote
DefenderMidlands



Member Since: 08 Mar 2023
Location: West Midlands
Posts: 225

United Kingdom 
Has anyone got park assist working without errors, someone said about resetting something (pivi presumably) and letting the car sleep and then the errors went. I get the brake error too.
Post #1009863 3rd Oct 2023 8:15am
View user's profile Send private message View poster's gallery Reply with quote
Philipp1601



Member Since: 17 Feb 2023
Location: Borken
Posts: 22

Germany 
Hello!

I have activated Park Assist (786, see below) when activating ACC using a 72h license of the Chinese JET Pro Software.
That way I got it activate without the emergency brake fault.
Unfortunately it does not work until now.
It stops on the Pivi screen when the assistance wants me to push the „start“ button on the Pivi screen which is greyed out and does not react.

I tried many various other settings on the park assist related configs but all without effort.

When I try to unable the MC-786 I get the emergency brake fault that others get when activating MC-786 or ACC.

Related to:
MultiCAN-786 Park Assist
Standard: Not Fitted
Change to: Full Auto VarD (Fully automated park assist with automated steering breaking accelaration and gears) Greetings

Philipp

---------------------------------------
MY24 Defender 110 XS-Edition D250 Stealth Mod
MY07 VW Multivan T5 Sport Edition D5
MY12 Mini R55 Cooper Works
MY00 MB SLK 320 R170 Designo
MY21 KTM 690 SMC-R
Post #1009878 3rd Oct 2023 10:05am
View user's profile Send private message View poster's gallery Reply with quote
Hairy Dan



Member Since: 25 Apr 2013
Location: NW Durham
Posts: 1414

United Kingdom 1998 Defender 90 V8 Petrol 50th Auto Chawton White
LRD2023 wrote:
I have a GAP Tool BT from around 2015, do I need to update the firmware before using for L663 2023 (p400e)?


You need to have a G3 version of the tool to work on 2017+ vehicles, if you IID tool doesn't have G3 on the label you will have to get in touch with GAP Thumbs Up



Click image to enlarge
 Cheers Ian
--------------------
22MY Defender 110 D200 SE, Fuji White.
Kielder 4x4 Safari
Instagram @defender_v8
Post #1009884 3rd Oct 2023 10:32am
View user's profile Send private message View poster's gallery Reply with quote
atldef110



Member Since: 01 Oct 2023
Location: Atlanta
Posts: 11

United States 
Philipp1601 wrote:
Hello!

I have activated Park Assist (786, see below) when activating ACC using a 72h license of the Chinese JET Pro Software.
That way I got it activate without the emergency brake fault.
Unfortunately it does not work until now.
It stops on the Pivi screen when the assistance wants me to push the „start“ button on the Pivi screen which is greyed out and does not react.

I tried many various other settings on the park assist related configs but all without effort.

When I try to unable the MC-786 I get the emergency brake fault that others get when activating MC-786 or ACC.

Related to:
MultiCAN-786 Park Assist
Standard: Not Fitted
Change to: Full Auto VarD (Fully automated park assist with automated steering breaking accelaration and gears)


Thanks for trying out @Philipp1601

I guess we will need more testing time. It still works for me, but with the brake fault on. I will update if I get any different result.
Post #1009906 3rd Oct 2023 12:49pm
View user's profile Send private message View poster's gallery Reply with quote
Ratledge



Member Since: 17 Jun 2023
Location: Murchison NC
Posts: 28

United States 2016 Defender 90 300 Tdi SW Auto Stornoway Grey
I let mine sit overnight and still get the Emergency Brake message immediately upon start.

After a few minutes I get the message about "limited traction" and "2 wheel drive".

I do see a little blue "P" show up on the dash right below the "2" in my RPM dial when I am driving 18mph (30km) with occasional arrows left or right. I don't live near any striped lots, so I don't know what happens next.
Post #1009938 3rd Oct 2023 6:41pm
View user's profile Send private message View poster's gallery Reply with quote
atldef110



Member Since: 01 Oct 2023
Location: Atlanta
Posts: 11

United States 
That’s exactly what happened to mine. Still with the brake error I was able to use it.
The feature park parallel or in a spot between two cars even if there is no car parked.
To activate the feature you should see a steering wheel on your Pivi above the camera, once you press that button, the car will start searching for an open parking spot while you drive around and it will show on your Pivi when a spot is found. Once it finds a spot, stop, press on the spot you want the car to park, press Start at the bottom of you Pivi and the car will start parking by itself. You won’t need to press gas or maneuver.
Post #1009949 3rd Oct 2023 7:58pm
View user's profile Send private message View poster's gallery Reply with quote
LRD2023



Member Since: 03 Oct 2023
Location: Espoo
Posts: 3

Finland 
[quote="Hairy Dan"]
LRD2023 wrote:
I have a GAP Tool BT from around 2015, do I need to update the firmware before using for L663 2023 (p400e)?


You need to have a G3 version of the tool to work on 2017+ vehicles, if you IID tool doesn't have G3 on the label you will have to get in touch with GAP Thumbs Up

I have G3 and managed to update today. After update CCF downloaded succesfully.

Todays candy was Config TR, Seatbelt Alarm off, Dynamic-I and Auto Start Stop.

After Auto Start Stop mod EV selection gives an error "not in use". Any idea to this (p400e)?

All the other mods works perfect. Thanks Ian for the great instructions!
Post #1009957 3rd Oct 2023 9:25pm
View user's profile Send private message View poster's gallery Reply with quote
Ratledge



Member Since: 17 Jun 2023
Location: Murchison NC
Posts: 28

United States 2016 Defender 90 300 Tdi SW Auto Stornoway Grey
Hybrid vehicles always have the "instant on" electric motor(s), so no true "Stop and Go" like petrol engines. The system controls if (and which) side to use all the time.
Post #1009958 3rd Oct 2023 9:32pm
View user's profile Send private message View poster's gallery Reply with quote
malibu



Member Since: 11 Sep 2023
Location: Melbourne
Posts: 49

Australia 
Has anybody tried -Menu–Service/Test -> PAM-Parking Aid -> Reset CCF Learn for auto paring.
If is recommended on the GAP tool site under FAQ?

Also I notice my Android app received an update yesterday for 2017+ models, I wounder if that helps at all.
Post #1009960 3rd Oct 2023 9:54pm
View user's profile Send private message View poster's gallery Reply with quote
LRD2023



Member Since: 03 Oct 2023
Location: Espoo
Posts: 3

Finland 
Ratledge wrote:
Hybrid vehicles always have the "instant on" electric motor(s), so no true "Stop and Go" like petrol engines. The system controls if (and which) side to use all the time.


That's true.

Hybrid mode is just frustrating when jumping out and in to car; it switches car off.
Post #1010012 4th Oct 2023 11:39am
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 58 of 104 <123 ... 575859 ... 102103104>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums