DEFENDER2.NET - View topic - Retrofit 11.4 Pivi Display

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Modifications & Maintenance (L663) > Retrofit 11.4 Pivi Display

Page 1 of 9

Print this entire topic ·

Clark4x4

Member Since: 19 Jun 2023
Location: Madrid
Posts: 29

Retrofit 11.4 Pivi Display

After clearsight retrofit I found this on CCF files:

Click image to enlarge

I really like bigger screen, so... started to investigate about connectors used, pin's, etc...

Click image to enlarge

At the same time found display and plastic trims on ebay...

Click image to enlarge

I spend lot of time to build connector, specially second conector to use pins from current connector.
Grey connector to new screen is this one:
JAE ELECTRONICS / MX34012SF1
pins M34S75C4F1 (I buy also pins f2 and F3, just in case)

And for second connector, to use current pins, this one is valid:
BMW 61132359994 61136925611 (blue/green in picture, found on ebay)
And yes, I buy a lot of diferent connectors because I was not sure wich one is valid

let's go...

Click image to enlarge

Reach some screws are quite difficult... better have long torx screw drivers!!!

Click image to enlarge

And finally after some panic moments, blank screen after change CCF MultiCAN 641... solved with hard reset of Pivi (hold buttond around 10 seconds)

Click image to enlarge

Done!!!!

Need to put everthing in place (not easy), and another retrofit done.

2nd Sep 2023 11:31am

Clark4x4

Member Since: 19 Jun 2023
Location: Madrid
Posts: 29

oh, important, change of pins positions from old connector to new one...

Click image to enlarge

2nd Sep 2023 11:36am

walfy

Member Since: 29 Aug 2007
Location: Frome
Posts: 2655

Was it a brand new screen? I thought they were coded to the car. 110 D250 SE HT
110 USW SOLD
RRE HSE Dynamic Gone, wife killed it
VOLVO XC60 R Dynamic with some toys

Polaris RZR 900XP SOLD

2nd Sep 2023 12:44pm

Hairy Dan

Member Since: 25 Apr 2013
Location: NW Durham
Posts: 1411

1998 Defender 90 V8 Petrol 50th Auto Chawton White

Brilliant job Clark4x4

It's a retrofit I would like to do if I can find all the bits cheap enough

Cheers Ian
--------------------
22MY Defender 110 D200 SE, Fuji White.
Kielder 4x4 Safari
Instagram @defender_v8

2nd Sep 2023 1:02pm

aajr

Member Since: 18 Dec 2022
Location: San Diego
Posts: 32

Clark4x4

I have the big screen from factory, but I must say that this is a brilliant post with all of the information one might need to make the upgrade. Well done!

2nd Sep 2023 2:44pm

Clark4x4

Member Since: 19 Jun 2023
Location: Madrid
Posts: 29

walfy wrote:
Was it a brand new screen? I thought they were coded to the car.

I bought on eBay, used

Cheers

2nd Sep 2023 3:14pm

mmbanf

Member Since: 16 Mar 2021
Location: Milano
Posts: 161

Clark4x4 wrote:
oh, important, change of pins positions from old connector to new one...

Click image to enlarge

Hello, Clark,
congratulations, great work, thanks for the many useful information.

Marco

3rd Sep 2023 9:02am

Moo

Member Since: 01 Oct 2021
Location: UK
Posts: 1337

I can now understand why the retro fit is so expensive from third party providers.

Great effort, but I'm happy with the smaller screen.

Eiger Grey MY23 D250 SE with bits. Known as Noddy.

3rd Sep 2023 9:16am

J77

Member Since: 04 Nov 2019
Location: Fife
Posts: 3384

Hats off for doing it but it seems a huge effort for not a lot of benefit over the small screen. 24MY 90 D250 HSE, Tasman Blue

3rd Sep 2023 10:06am

ckamps

Member Since: 04 Jul 2023
Location: Missouri
Posts: 36

Great write up!

Would you be willing to produce and sell the wiring harness adapters?

Do you have any advice as to which eBay country sites might offer the best chance to find second hand screens?

In another forum, it was mentioned that Land Rover tools are required to enable the 11.4” screen. Based on your experience it appears that you only needed the Gap IID tool to accomplish necessary coding. Is that correct?

12th Sep 2023 3:30am

Clark4x4

Member Since: 19 Jun 2023
Location: Madrid
Posts: 29

Hi,

well drop me a PM and I try to help you with connector, I got some spare pieces to built at least another set...

I found all pieces in ebay UK, from a damaged vehicle, in a very good conditions. I guest the key is be aware or setup an automatic search. Be aware that Jaguar use same display... i.e. all these references are valid:

T2H42943, T2H42943, MX6319C279AE, LR144528, T2R72241

I got under my radar this unit at good price (all plastic trims need to be buyed), but not sure about this page:
https://used.lr.parts/product/t2h42943-tou...2017-used/

or you could ask your LR dealer, but will be expensive

And yes, with GAP IID tool is enough!!!

13th Sep 2023 6:15am

ckamps

Member Since: 04 Jul 2023
Location: Missouri
Posts: 36

H Clark4x4, can you PM me? I cannot PM you due to me not having enough posts.

Thanks!

14th Sep 2023 11:43pm

Hairy Dan

Member Since: 25 Apr 2013
Location: NW Durham
Posts: 1411

I'm sure you only need 3 posts to be able to use PM's so how's the weather in Missouri?

Cheers Ian
--------------------
22MY Defender 110 D200 SE, Fuji White.
Kielder 4x4 Safari
Instagram @defender_v8

15th Sep 2023 6:52pm

ckamps

Member Since: 04 Jul 2023
Location: Missouri
Posts: 36

Hah! Funny guy. Best time of year 70F, low humidity, and sunny.

15th Sep 2023 10:28pm

Vidoq

Member Since: 05 Oct 2023
Location: Doha
Posts: 4

Sorry for not starting the new thread, I have an issue while retrofitting 11.6 inch screen.
Once I install it and changed the ccf to 11.6 alpine, I found on the screen - placeholder images.
Did u face the same issue?
Does anyone know how to get rid of them?

Click image to enlarge

5th Oct 2023 1:36pm

Page 1 of 9

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum