• Forum
• Gallery
• Shop
• Sponsors

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > My Defender > Puma to LT1/8L90 Restomod

Page 12 of 41 < 1 2 3 ... 11 12 13 ... 39 40 41 >

Print this entire topic ·

mrfirepro Member Since: 06 Nov 2020 Location: kent Posts: 231

Hi Andy, That’s from Nick at RW Engineering. I've asked for technical details a couple of times but nothing has been forthcoming. It seems Nick is overrun with work so I've spoken with Martin (futuranet) and he thinks he can put something similar together. Martin has made no promises apart from he’s going to look at it. I'm going to wait for Martin as I'm using the rest of his kit and it keeps it all together, plus it will probably be at least 6 months before I get anywhere near to thinking about the cluster. Martins System controller will do everything else I need. This is also the way I'm planning on integrating the TMPS into the display, via a can bus TPMS unit from tyrepal. I wasn't very clear on integration between the GM ECU and LR systems. I'm removing the LR ECU and replacing it with the system controller from Futuranet, that will not only integrate the GM ECU via canbus but will also do all the other function that I need (ABS/AC, cluster etc etc..) If the remote display gets off the ground that will be able to show all the GM info as well as gears. If anyone else is interested please give Martin a call as the more people that show interest the more chances it has of happening.

8th Mar 2021 8:19pm

Philip Member Since: 09 Mar 2018 Location: England Posts: 510	Does the gearbox come with a standard tune for the supplied engine?
8th Mar 2021 8:40pm

mrfirepro Member Since: 06 Nov 2020 Location: kent Posts: 231

Turnkey provide a complete package and tune engine and GB to work specifically with the defender(thats there sales pitch anyway). They upgrade the CAM and tune for around 525BHP (think 450 is standard). They provide the complete package so that it's just plug and play my end, well that’s how the story has started let wait and see. They run every package they sell to check it all works together, thus eliminating any gremlins that may be in any of the components or the loom.

8th Mar 2021 8:49pm

mrfirepro Member Since: 06 Nov 2020 Location: kent Posts: 231

Axles shot blasted and prepared and painted with EM121 Click image to enlarge Calipers and Rotors arrived, unfortunately the rotors are wrong they should have been fully floating so they have to go back.... Click image to enlarge Click image to enlarge Sorry not the best photos I was in a rush. I've now blasted every single bracket, boxed up all the nuts and bolts ready to go off to the platers tomorrow. Whilst I've not had that much to do I could get on with the fuel system, this is my outline design, I'd be happy to get any advice..... Click image to enlarge

8th Mar 2021 11:46pm

ay4alex Member Since: 18 Feb 2009 Location: Midlands Posts: 328	Whilst not helpful with the fuel query, that 996 GT2 is divine Build is looking stunning! A 110 Tdci Double Cab
9th Mar 2021 8:50am

FD7 Member Since: 16 Feb 2021 Location: Midland Posts: 170	Those brake discs do look good! Look great quality, hopefully you get on well with them!
9th Mar 2021 10:18am

Philip Member Since: 09 Mar 2018 Location: England Posts: 510	mrfirepro wrote: Turnkey provide a complete package and tune engine and GB to work specifically with the defender(thats there sales pitch anyway) Interested to see how it all works out - I was looking at the “budget” method of buying a pull-out driveline with an already-matched box.
9th Mar 2021 12:23pm

mrfirepro Member Since: 06 Nov 2020 Location: kent Posts: 231	a few changes to the fuel layout. AN-06 with 8mm hose was probably on the small side so now changed to the AN-08 with 11mm hose, which should be good for upto 650 BHP. Click image to enlarge
9th Mar 2021 12:39pm

mcma1 Member Since: 16 Oct 2012 Location: Northern Ireland Posts: 2900

Pretty much all there is to it. The pressure gauge is a good idea. My recent regulator issue may encourage me to fit one. Andy 2014 Fuji 110 SW LS3 https://www.defender2.net/forum/post751233.html#751233 2014 Corris 110 SW http://www.defender2.net/forum/topic40056.html My old Xtech 90 build.. http://www.defender2.net/forum/topic15681.html LS3 V8 build... http://www.defender2.net/forum/topic49051.html

9th Mar 2021 4:31pm

Linds Hanson Member Since: 16 Jan 2021 Location: Cornwall Posts: 486	Can you run the GM Corvette fuel filter then just have to run return to that?
9th Mar 2021 6:47pm

mrfirepro Member Since: 06 Nov 2020 Location: kent Posts: 231	Andy, where did you mount your regulator? engine/firewall?? any pics?
9th Mar 2021 11:31pm

mcma1 Member Since: 16 Oct 2012 Location: Northern Ireland Posts: 2900	Mine is fitted in behind the cover plate in the rear driver side arch Andy 2014 Fuji 110 SW LS3 https://www.defender2.net/forum/post751233.html#751233 2014 Corris 110 SW http://www.defender2.net/forum/topic40056.html My old Xtech 90 build.. http://www.defender2.net/forum/topic15681.html LS3 V8 build... http://www.defender2.net/forum/topic49051.html
10th Mar 2021 2:59am

mrfirepro Member Since: 06 Nov 2020 Location: kent Posts: 231

Fitting up the rear axles with new stub axles. The kit I've bought has got two gaskets one larger one with an ABS sensor cut out and a rather flimsy paper one with no abs cut out. I'm using the ABS one (as I'm adding ABS) but it is bigger than the flimsy paper one and sticks out the sides of the flange. It seems strange to have two gaskets of differing materials and sizes with different cut outs? Or gaskets for different models perhaps but why is the one with the ABS cut out soo much bigger? Am I missing something???

15th Mar 2021 2:54pm

mrfirepro Member Since: 06 Nov 2020 Location: kent Posts: 231	Picked up the tub rails and bulkhead from the galvanisers Click image to enlarge after Tank Kleen and t wash Click image to enlarge After the britpart bulkhead removal bar debarcle tried the PPCages one and it fitted with no problems. So all the tub repairs are nearly done just left to fit the side rails and then EM121 to the base. Click image to enlarge
16th Mar 2021 8:11am

JOW240725 Member Since: 04 May 2015 Location: Suffolk Posts: 7907

Wow! I love a bit of galv. Whilst I agree the bulkhead needs painting will the cappings be painted of left galv?  James MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641 MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557 Instagram @suffolk_rovers

16th Mar 2021 9:10am

Page 12 of 41 < 1 2 3 ... 11 12 13 ... 39 40 41 >

All times are GMT Jump to  Select a forum General Technical Maintenance & Modifications In Car Electronics Wheels & Tyres Tdi V8 Td5 Puma (Tdci) 130 Defender Celebration Series & Classic Works Series Land Rovers My Defender Spotted Events Pictures & Video Expedition & Overland Camping, Caravanning and Holidays Land Rover Customer Relations General & Technical (L663) Orders 2021MY (L663) Orders 2022MY (L663) Orders 2023/24MY (L663) Orders 2025MY Faults & Fixes (L663) Wheels & Tyres (L663) In Car Electronics (L663) My New Defender (L663) Modifications & Maintenance (L663) P400e Area (L663) V8 P525 Area (L663) Pictures & Video (L663) INEOS Grenadier Europe Australia & New Zealand Africa North America & Canada For Sale & Wanted For Sale & Wanted (L663) eBay & Bargain Spots Group Buys Dealership & Sponsor Feedback Finance & Insurance Stolen A-Plan Insurance Advanced Factors CSK Land Rovers Duckworth Parts Empire Tuning Other Site Sponsors Site News & Feedback Off Topic

<  Previous Topic | Next Topic >

Posting Rules You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum

Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis