Home > My Defender > Puma to LT1/8L90 Restomod |
|
|
LJMARSDEN Member Since: 08 Jun 2021 Location: Nottingham Posts: 339 |
I've had issues getting the V5 updated/ Corrected so that has been left for now. I did discuss it with my now insurance provider and their advice was to keep trying but as long as your vehicle is insured and meets Emissions requirements for MOT etc you will be covered legally. That was Adrian Flux.
I believe conforming to the emissions of the engine prior is a must... Unless you have a friendly MOT centre which I do not at the moment. 4.0 V8 Defender 90 My Instagram |
||
30th Jul 2024 2:58pm |
|
mrfirepro Member Since: 06 Nov 2020 Location: kent Posts: 231 |
Door cards starting to go on
Click image to enlarge Seat belts going in Click image to enlarge Having bought 3 double din plates non of which have properly fitted (the one from Defender Upgrades was particularly bad), even after a bit of fettling I decided I'd have a go myself and try and make something that fits properly. I felt that the lower body fitted well but the problem was with the upper section. My idea was to cut an upper section from the OE unit and cut the lower section from an aftermarket unit and see if together they fitted any better. Upper section from OE fascia, the added bonus here, as I was not using air to these vents, is that it did away with the annoying rattly moveable vents from the aftermarket unit. Click image to enlarge Click image to enlarge Lower section Click image to enlarge I'm really pleased with the results and the panel here has not been screwed down. I'll probably paint all the parts using the Upol specialist paints which I can get in grey which closely matches the leather. Click image to enlarge I've finally found a company that will do the PPF, so I'll be in for a few days of polishing before going for PPF, will be interesting to see how they get on. |
||
1st Aug 2024 9:50pm |
|
Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3785 |
Double post, see below!
Last edited by Pickles on 1st Aug 2024 11:09pm. Edited 1 time in total |
||
1st Aug 2024 11:06pm |
|
Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3785 |
Amazing, precise incredible work. Don't know what else to say, except perhaps, I wish it was mine!
|
||
1st Aug 2024 11:08pm |
|
mrfirepro Member Since: 06 Nov 2020 Location: kent Posts: 231 |
Thanks you for all the love this thread has received, it is really motivational.
As I am nearly at the end all I have left is to fit the carpets, sort the double din and give it an MOT. Here are some pictures of whats been going on recently... Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge |
||
27th Aug 2024 8:27pm |
|
BaronDefenders Member Since: 28 Jun 2019 Location: London/Cotswolds Posts: 896 |
This is looking absolutely top drawer! Charlie
1949 Series 1 80 (SOLD) 2002 Td5 90 (SOLD) 2008 Freelander 2 (SOLD) 1958 Series 2 88 Pastel Green (2019 LR Legends Best Restored) 1983 V8 110 Limestone (Previously owned by Tom Sheppard MBE) 2004 Td5 90 Santorini Black (Td5INSIDE Powered & Rebuilt by CSK) 2012 Puma 110 Zermatt Silver (Overlanding Build) Instagram: @BaronDefenders |
||
27th Aug 2024 8:40pm |
|
Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3785 |
computer error
Last edited by Pickles on 27th Aug 2024 11:47pm. Edited 1 time in total |
||
27th Aug 2024 11:44pm |
|
Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3785 |
computer error
Last edited by Pickles on 27th Aug 2024 11:49pm. Edited 1 time in total |
||
27th Aug 2024 11:44pm |
|
Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3785 |
computer error
Last edited by Pickles on 27th Aug 2024 11:48pm. Edited 1 time in total |
||
27th Aug 2024 11:44pm |
|
Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3785 |
Sorry about my computer issue,...hope this post works.
This is so brilliant that I have no adequate words to describe it. Love the LT1 cutouts in the sills etc, LOVE the dual exhausts, the integrated dash/interior controls etc,..just THE BEST. You are so talented. |
||
27th Aug 2024 11:45pm |
|
mrfirepro Member Since: 06 Nov 2020 Location: kent Posts: 231 |
Today was MOT Day
It was like waiting for the birth of a new child, then suddenly out pops the MOT tester with a great big smile on his face telling me it's passed and all this in just 4 years and a few weeks , I was supper chuffed at a self build with a first time pass..WOW And aside to my snag list of over 100 items Also PPF is done as usual here are some recent pics Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Thinking about it's first outing being Tim Fosters get together in London early December...anyone else going?? |
||
18th Nov 2024 6:36pm |
|
Zed Member Since: 07 Oct 2017 Location: In the woods Posts: 3310 |
Congratulations. Absolutely stunning build. Chapeau.
EDIT: Oh and it’s the first Defender I’ve seen which looks great on 20’s. What size are those tyres and is it dropped -1 and -1.5 rear ? WARNING. This post may contain sarcasm. Last edited by Zed on 18th Nov 2024 10:15pm. Edited 1 time in total |
||
18th Nov 2024 7:27pm |
|
Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3785 |
Well done, best Defender 90 ever, your attention to detail has been 100%.
Have you ever put up a video of the sound, those dual exhausts would sound beautifu? Have you any words to describe your driving experience, & is it how you thought it would be after all this time? I think every member of the forum would like to own this! |
||
18th Nov 2024 10:06pm |
|
LR90XS2011 Member Since: 05 Apr 2011 Location: bickenhill Posts: 3643 |
Brilliant Thread
thanks for sharing so much detail something I will never do but impressed with what you have done DEFENDER 90 TDCI XS, I hope everyone is well and your land rovers make you happy |
||
19th Nov 2024 5:44am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis