DEFENDER2.NET - View topic - Our Galway Green Defender 90

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > My Defender > Our Galway Green Defender 90

Page 9 of 9

Print this entire topic ·

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

Very nice

Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

14th May 2020 1:58pm

sgreenham

Member Since: 27 Apr 2019
Location: Southampton
Posts: 145

2010 Defender 90 Puma 2.4 HT Galway Green

Thanks Darren.

Does anybody know if I’ve fitted the top bit correctly?... it seems secure but the instructions were pretty poor. There’s a rubber seal which is fitted around it and then clamped up around that.

Click image to enlarge

14th May 2020 3:05pm

AlexCW

Member Since: 04 Mar 2020
Location: Staffordshire
Posts: 67

2013 Defender 110 Puma 2.2 HT Galway Green

sgreenham wrote:
The drivers side window winder has been sticking at the half way point. I need to take the door apart as I have a central locking kit coming soon and I also wanted to install some sound deadening in the doors too.

Click image to enlarge

Once the door card was off I couldn't see anywhere in particular it was sticking so I sprayed a fair bit of WD40 around and loosened off some of the fixings to see if it made a difference

All was solved when I adjusted the fixing on the right and it now moves smoothly

Click image to enlarge

The door also kept shutting on me so I tightened up the fixings just inside the door. Now stays open.

Click image to enlarge

I thought that was going to be a lot trickier but it was nice easy fix.

Lastly I installed some Silent Coat on both doors and on the inside of the door cards. The door cards will stay off until the central locking kit arrives.

Click image to enlarge

Did you find it difficult to install the silent coat inside the doors? It looks like it could be tricky to install behind the window mechanism etc. Also, I'd never thought to install some on the door card as well as the door. The soundproofing is next on my list so I'll be installing it at some point this week with a bit of luck!

Love the Defender and the channel btw, keep up the good work!

17th May 2020 9:52pm

sgreenham

Member Since: 27 Apr 2019
Location: Southampton
Posts: 145

It's really easy to fit Silent Coat behind the mechanism, the 'sheets' just slide up behind. There seems to be plenty of clearance. I don't have electric windows so I'm not sure if that would make a difference. I would pick up some of the plastic clips that hold the door card on if you haven't taken the door card off before. A couple of mine snapped. They're not very expensive. Makes a nice difference to the feel the doors though once it's done.

18th May 2020 8:02am

sgreenham

Member Since: 27 Apr 2019
Location: Southampton
Posts: 145

All being well, Friday should see our Defender being joined by a younger brother... we can't wait!

Click image to enlarge

25th May 2020 5:30pm

Page 9 of 9

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum