 | Home > My Defender > davidwhittaker's black 110 Utility Wagon & ongoing mods |
 
|
|
|
| Cheshire110 Member Since: 26 Jul 2013 Location: Cheshire/London Posts: 2746  
|
thanks Steve and sweepc, I shall find the toughest tape I can find and make sure i give the surface a thorough clean down
the badges are much lighter than you'd think so can imagine they'd stay on fine now I look at them... Cheers, David Land Rovers of all shapes S3 onwards… Daily is a 110 V8. |
||
9th Dec 2013 10:37pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20263
|
You can have some of the tape I have if you want it?
|
||
|
9th Dec 2013 10:39pm |
|
| Cheshire110 Member Since: 26 Jul 2013 Location: Cheshire/London Posts: 2746
|
thanks Steve, but it can't be worth your time, hassle and money surely... I need a roll of something good for a few bits and bobs anyway so honestly don't worry about it
still haven't 100% ruled out the rivet idea in my head either! i just love the gun  Cheers, David
Land Rovers of all shapes S3 onwards… Daily is a 110 V8. |
||
|
9th Dec 2013 10:45pm |
|
| Cheshire110 Member Since: 26 Jul 2013 Location: Cheshire/London Posts: 2746
|
yeah I do think tape will be the way I go forward
can't wait.. Also have my mud defenders to fit, my CB radio and iPhone holder: these are the ones I went for: http://www.thunderpole.co.uk/cb-radio-pack...-pack.html http://www.dsldevelopments.com/brodit/Hold...Holder.asp Cheers, David Land Rovers of all shapes S3 onwards… Daily is a 110 V8. |
||
|
10th Dec 2013 11:24am |
|
| Cheshire110 Member Since: 26 Jul 2013 Location: Cheshire/London Posts: 2746
|
New rear badge, CB and aerial fitted...
 Click image to enlarge Click image to enlarge Click image to enlarge Click image to enlarge Pleased with it all at the moment, looking good & driving well
Click image to enlarge[/url] Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated  Cheers, David
Land Rovers of all shapes S3 onwards… Daily is a 110 V8. |
||
|
21st Dec 2013 3:59pm |
|
| GUM97 Member Since: 05 Feb 2012 Location: Cheshire Posts: 3555 
|
How did you put the read badge on in the end? Tape? (Looks great btw!) An engine to TDi for!
"Land Rover- Proudly turning drivers into mechanics since 1948" |
||
|
21st Dec 2013 4:14pm |
|
| Cheshire110 Member Since: 26 Jul 2013 Location: Cheshire/London Posts: 2746
|
Number plate tape in the end, yeah, and a couple of blobs of silicone for good measure!
Yeah really happy with it, keeping an eye on it in the wet weather incase it decides to jump off but seems good so far Cheers, David Land Rovers of all shapes S3 onwards… Daily is a 110 V8. |
||
|
21st Dec 2013 4:17pm |
|
| DingoDad Member Since: 02 Jan 2014 Location: Norwich Posts: 20  
|
Hi David,
Love what you have done with your 110. I was wondering where you got the boxes to house your 6x9's in the back. Saw them in your initial post and they look great. Cheers Ian |
||
|
3rd Jan 2014 12:06pm |
|
| Cheshire110 Member Since: 26 Jul 2013 Location: Cheshire/London Posts: 2746
|
So after a great day out on the plains a week or so ago, my defender has finally recovered and i drained most of the mud out of the chassis/engine bay/bumpers/crossmembers/footwells/my shoes etc and got killer90 at CSK's DRL bumper fitted, having removed the old one which was putting up a fight! i posted on another thread but for continuity i felt it should go here, and also have a bit better pic.
BEFORE: Click image to enlarge AFTER: Click image to enlarge looks a lot 'cleaner' at the front end I think (in more ways than one!!) I've also bought 4x Cree led spot lamps to fit to the bumper (2 per side, why not!) since the cheaper ebay ones i had had for a while finally started giving up. also gave me a chance to improve the wiring etc on the bumper and from the dash through the bulkhead & engine bay. these are the lights I've bought.. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...AQ:GB:1123 not exactly expensive but look decent quality, cost me £80 for the 4 and should throw out a decent amount of light. ill wire them up with the high beams using a relay and a switch on the dash too so i can have them off if i don't want them on. reply to DingoDad: can't remember the exact boxes i purchased but they were around £10-12 each off ebay and i was going to bolt them down but they happened to wedge in there quite nicely and the friction of carpet on carpet holds them there well. if you ebay search '6x9 speaker box' loads will come up, mine looked most similar to these: http://www.ebay.co.uk/itm/Pair-of-6x9-MDF-...2a27e813f0 any questions just ask (I'm no expert but i try!) Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Cheers, David
Land Rovers of all shapes S3 onwards… Daily is a 110 V8. |
||
|
3rd Jan 2014 12:26pm |
|
| barbel jim Member Since: 12 Dec 2012 Location: Northants Posts: 1418 
|
 You'll be cleaning bits of Sailsbury plain off for months to come ! !!!!!! Its awful stuff  |
||
|
3rd Jan 2014 12:29pm |
|
| Cheshire110 Member Since: 26 Jul 2013 Location: Cheshire/London Posts: 2746
|
tell me about it! when wet it forms something between clay and cement!
i took the bungs out of the end of the chassis and just pumped water into every hole i could find until the water came out the end clean! Cheers, David Land Rovers of all shapes S3 onwards… Daily is a 110 V8. |
||
|
3rd Jan 2014 12:40pm |
|
| Cheshire110 Member Since: 26 Jul 2013 Location: Cheshire/London Posts: 2746
|
saw this from twisted:
Click image to enlarge and decided to get the black front end for mine too. Click image to enlarge really pleased, and may have to spray them gloss black to stop them going grey in a couple of years time but they look good i think! just wish i could get some decent photos of mine, always seem to not come out great... Click image to enlarge STILL WAITING FOR THE LED SPOTS TO COME!!!... Ugh Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Cheers, David
Land Rovers of all shapes S3 onwards… Daily is a 110 V8. |
||
|
10th Jan 2014 10:15am |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
Looks good. I did the samething with mine as, with the exception of a couple of specific colour combinations, I prefer the black front end over the Brunel:
Click image to enlarge You do, of course, need a black grill badge to finish it off  Darren
110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
10th Jan 2014 10:29am |
|
| Cheshire110 Member Since: 26 Jul 2013 Location: Cheshire/London Posts: 2746
|
Doesn't show up on photos but I already have the black badge
Yeah black looks a lot better I think except some colours Cheers, David Land Rovers of all shapes S3 onwards… Daily is a 110 V8. |
||
|
10th Jan 2014 10:45am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
