Cometboy wrote:

dakluck wrote:

Does anyone have a stock CCF file for a US spec Defender with the premium headlights? Preferably closer to the 2020 model year, but I’ll take anything right now to get these headlamps coded correctly!!

hey there. don't know if anyone ever answered you.

i am in NJ and have been fiddling with the G4 and the different headlight units.

In the US market the Premium LED is actually called Matrix Led AFS123/IHB in the CCF using G4.
These are the units that are labeled as KZ3 04S.

if you have the KZ3 05S variant then you have the "Pixel LED AFS123/IHB...

Hope this helps...

be careful of people selling "Matrix LED" for NAS Spec as they are just KZ3 04S "Premium LED" and not the KZ3 05S "Matrix LED" ...

Good Luck

jordjdw87 wrote:

Can anyone with a g4 IID confirm that you can set the three vehicle heights independently? I’d like to lower the access mode without lowering the standard ride height. This is to help my dogs getting in/out the back of the car! Apologies this is a dupe of a separate post - just wondering if there’s a clear yes/no to using the tool

For convience the Llams height controller is making that possible with just 2 turns left on the selector knob.

https://www.defender2.net/forum/post963767.html


Click image to enlarge No Mud flaps for my 90.!
-----------------------------------------
P300 S MY21 on air, adv.+ offroad pack, DRL+fog, Dinamica Suedecloth + Ebony headliner/Cross Beam- Many Mods..

hthagood wrote:

Hairy Dan wrote:

These are the main changes from the G3, most of the MultiCAN numbers were there in the latest G3 firmware but they were all down as not supported, they now have options

MultiCAN-882 Sidebar Controls
Sidebar Controls with DSC + VC Drawer AND VC Bar on 4x4i

MultiCAN-892 SideBar Climate
Climate Icon on Side Bar Available - FICP Replacement

MultiCAN-894 Volume Soft Keys
Audio Volume Soft Keys pattern

MultiCAN-896 ReCircle Soft Button
Soft Button Fitted with timed and latched logic

MultiCAN-897 Max AC Soft Button
Soft Button Fitted

MultiCAN-897 Max Defrost Soft Button
Soft Button Fitted

MultiCAN-897 AC OnOff Soft Button
Soft Button Fitted

MultiCAN-897 Auto Climate Soft Button
Front AUTO Climate Soft Button Fitted

MultiCAN-898 Front Htd Screen Soft Button
Soft Button Fitted

MultiCAN-898 Read Htd Screen Soft Button
Soft Button Fitted

Anyone been able to get the soft volume control to function? All I get is a readout of “0” and no volume control. It will show mute status? Thanks!

I believe that the volume control key will work on only MY24 or above vehicles.
On my friend's MY24 worked, but mine MY23.5 didn't.

malibu wrote:

Sorry to change the topic slightly. I would like to retrofit TPMS. I believe I need to purchase a module that goes into the roof, above the light panel. But before I pull the light panel out, I was wondering if the GAP G4 shows the ECU module. Could somebody please with TPMS, open their Ecu Infos menu and see if it shows the TPMS module? Thanks in advance

HI,
here's to you,
the gap recognizes tpms ecu, which will be appropriately configured on the ccf file.
Be careful if you buy a new ecu, you will need pathfinder or topix cloud to load the appropriate software, if you buy used it should work fine, but it will be stored with its donor vin.


Marco

Click image to enlarge

jordjdw87 wrote:

Can anyone with a g4 IID confirm that you can set the three vehicle heights independently? I’d like to lower the access mode without lowering the standard ride height. This is to help my dogs getting in/out the back of the car!

Apologies this is a dupe of a separate post - just wondering if there’s a clear yes/no to using the tool