↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > Prop shaft play
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Mother superior



Member Since: 05 Aug 2013
Location: Surrey
Posts: 504

United Kingdom 
Prop shaft play
Gents
The Landrover man is telling me that there is too much play in the 110s prop shaft and that the transfer box shaft thingie is goosed ( I think that he's right) but how much play should there be, just so I can check
Thanks
Wes Oh woe, oh woe
My crusty old landrover,
It will not go.
Post #524395 16th Apr 2016 7:10am
View user's profile Send private message View poster's gallery Reply with quote
Mash



Member Since: 09 Feb 2015
Location: Guernsey
Posts: 1674

Guernsey 1998 Defender 90 300 Tdi HT Nato Green
If you are on about propshaft yokes, there should be no play in them, sometimes a small amount of play can be taken up by greasing, the problem is a lot of people neglect the props and fail to grease them, this leads to premature wearing of the bearings inside the yokes. 90 wolf - Jasmin http://www.defender2.net/forum/topic39408.html
90 V8 - Maggie http://www.defender2.net/forum/topic42564.html
110 TD5 - Buggsy http://www.defender2.net/forum/topic59029.html
52HG25 lightweight https://www.defender2.net/forum/topic72342.html
D3 Hse - Fiona
Capri 2l S - Anna

Think I might have a problem............
Post #524410 16th Apr 2016 8:41am
View user's profile Send private message View poster's gallery Reply with quote
Retroanaconda



Member Since: 04 Jan 2012
Location: Scotland
Posts: 2646

Scotland 
Should be no play in yokes as above. And no play in propshaft sliding joint (though a little won't cause too much of a problem). The front output flange of the transfer box is supported by a straight ball bearing, so a little radial play in that is normal. Should be no play in the rear one.

Rotational play - i.e. driveline slop - some is normal. Depending on the wear in downstream components there can be up to 1/4 turn, this will cause clonking etc. but won't actually fail dramatically. Though it can increase wear on the propshaft joints themselves.
Post #524411 16th Apr 2016 8:46am
View user's profile Send private message View poster's gallery Reply with quote
Caterham



Member Since: 06 Nov 2008
Location: Birmingham
Posts: 6298

England 2011 Defender 110 Puma 2.4 XS CSW Stornoway Grey
Re: Prop shaft play
Mother superior wrote:
Gents
The Landrover man is telling me that there is too much play in the 110s prop shaft and that the transfer box shaft thingie is goosed ( I think that he's right) but how much play should there be, just so I can check
Thanks
Wes


I'm no expert but can't see how without taking the gearbox apart he can determine the transfer box shaft thingie is goosed - assuming he's referring to the well known problem of the extension shaft / adapter shaft?

good luck whatever - remember in terms of rotational slack there always appears to be quite a bit.
Post #524439 16th Apr 2016 10:16am
View user's profile Send private message View poster's gallery Reply with quote
Supacat



Member Since: 16 Oct 2012
Location: West Yorkshire
Posts: 11018

United Kingdom 2013 Defender 110 Puma 2.2 XS DCPU Keswick Green
Get underneath and ask him to show you what he means, there's only one way to learn for yourself - get your hands dirty and feel the play for yourself.
Post #524445 16th Apr 2016 10:59am
View user's profile Send private message View poster's gallery Reply with quote
g-mack



Member Since: 07 Jan 2014
Location: northumberland
Posts: 1967

United Kingdom 
Re: Prop shaft play
Caterham wrote:


I'm no expert but can't see how without taking the gearbox apart he can determine the transfer box shaft thingie is goosed - assuming he's referring to the well known problem of the extension shaft / adapter shaft?

good luck whatever - remember in terms of rotational slack there always appears to be quite a bit.


is there not and inspection plate with 6 bolts on that is easily removable? My 109 thread

my youtube channel
Post #585813 17th Dec 2016 4:37pm
View user's profile Send private message View poster's gallery Reply with quote
Caterham



Member Since: 06 Nov 2008
Location: Birmingham
Posts: 6298

England 2011 Defender 110 Puma 2.4 XS CSW Stornoway Grey
For the transfer gears yes but not the extension / adapter shaft. Thumbs Up
Post #585814 17th Dec 2016 4:45pm
View user's profile Send private message View poster's gallery Reply with quote
g-mack



Member Since: 07 Jan 2014
Location: northumberland
Posts: 1967

United Kingdom 
Post #585816 17th Dec 2016 5:03pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums