↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > Main beam cable location
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Franspuma



Member Since: 17 Sep 2016
Location: Aberdare
Posts: 2
Wales 2010 Defender 110 Puma 2.4 XS CSW Aintree Green
Main beam cable location
Hi does anyone know the relay and colour of the wire for the main beam as I'm trying to locate it within the cab to connect to the relay for my new spots. Very Happy
Post #565220 19th Sep 2016 8:32pm
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20625
United Kingdom 
Can't comment on relay but if pretty sure it's blue with white tracer.
Be sure to check though. Idea TheThunder RollsπŸ‡¬πŸ‡§πŸ‡ΊπŸ‡Έ
β›½οΈπŸ›’οΈβš™οΈπŸ§°πŸ’ͺ
Post #565224 19th Sep 2016 8:36pm
View user's profile Send private message View poster's gallery Reply with quote
miker



Member Since: 13 Sep 2015
Location: Surrey
Posts: 1769
United Kingdom 1999 Defender 110 Td5 CSW Rioja Red
Yup, blue with white in my TD5

Unless they updated it for the puma, there are no relays, all the current runs through the switch. Which is why it fails!
Post #565258 19th Sep 2016 11:37pm
View user's profile Send private message View poster's gallery Reply with quote
Roy5695



Member Since: 15 Feb 2014
Location: Cornwall
Posts: 1123
United Kingdom 2011 Defender 110 Puma 2.2 XS DCPU Indus Silver
easiest location to tap into it I found was in the engine bay, left hand side, next to the bulkhead there is quite a large plug, and like others have said there is no relay and the wire colour is blue with white trace.

You can always disconnect the plug and check with a milti-meter though.
Post #565274 20th Sep 2016 6:30am
View user's profile Send private message View poster's gallery Reply with quote
MartinK



Member Since: 02 Mar 2011
Location: Silverdale (Lancashire/Cumbria Border)
Posts: 2665
United Kingdom 2011 Defender 110 Puma 2.4 USW Orkney Grey
This is the linky I used: http://www.defender2.net/forum/topic11570....ght+wiring

In conjunction with the instructions from Land Rover for the standard kit...which I put in my gallery here:
https://www.defender2.net/gallery/albums/u...ctions.pdf

Basically (as Roy & Miker say)...most people splice into the wire under the bonnet. Here:


and here:


Note: The LR kit shows taking the main beam feed from near the stalk in the steering column... But doing it under the bonnet seems much easier Thumbs Up

Thanks "The Boy" (who I have not seen posting on here for ages)

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Mr. Green  Defender "Puma" 2.4 110 County Utility (possibly the last of the 2.4's)
Post #565277 20th Sep 2016 6:59am
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20625
United Kingdom 
I did mine behind the headlight, really it identical make much difference as to where. Thumbs Up TheThunder RollsπŸ‡¬πŸ‡§πŸ‡ΊπŸ‡Έ
β›½οΈπŸ›’οΈβš™οΈπŸ§°πŸ’ͺ
Post #565314 20th Sep 2016 9:41am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums