 | Home > My Defender > Td5 110 csw, Lowered, led's, Tints and Puma seats |
 
|
|
|
| ginjez Member Since: 18 Sep 2011 Location: huddersfield Posts: 1763  
|
Looking good Ray
 |
||
17th Jun 2020 5:45pm |
|
| mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769  
|
How’s it going stranger? Ray
My build thread http://www.defender2.net/forum/topic17615.html |
||
|
17th Jun 2020 7:23pm |
|
| mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769
|
Yeah, the chap who did the repair said we’d probably still be able to see it when it was done, but as I knew the screen surround was going to be getting painted when the repairs were done I figured the screen might break taking it out anyway. so I got it repaired to stop it cracking any further (as it didn’t cost me anything through my insurance) and I can put a new one in when it’s painted
 Ray
My build thread http://www.defender2.net/forum/topic17615.html |
||
|
18th Jun 2020 10:23am |
|
| mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769
|
Picked up the black painted bits this afternoon so obviously it’s raining
 Click image to enlarge Click image to enlarge Saturday might be ok to start stripping one side if the weather people have got it right this time. Ray My build thread http://www.defender2.net/forum/topic17615.html |
||
|
18th Jun 2020 8:25pm |
|
| mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769
|
It finally stopped raining at about 3 so I had a chance to start stripping it down which didn’t go too badly To be fare. I’m quite happily surprised at how little rust there is on the chassis for a 16 year old defender that had a ruff life before I got it and hasn’t really had any sort of treatment on it!
Click image to enlarge Click image to enlarge Click image to enlarge Sand paint and wax the chassis tomorrow then build up this side and then start on the other. Ray My build thread http://www.defender2.net/forum/topic17615.html |
||
|
19th Jun 2020 6:01pm |
|
| ginjez Member Since: 18 Sep 2011 Location: huddersfield Posts: 1763
|
I'm the stranger? Not seen you on here in ages and now you're posting on every thread! 
All ok here Ray, thank you. It would be good if I can get some kind of event sorted before Summer ends. I think we could all benefit from some time out.
I bet Emma loves having the table dressed in Defender parts  |
||
|
20th Jun 2020 6:58am |
|
| mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769
|
Fair point
bits on the table isn’t that bad....... when we renovated our last house we pulled up the old flagstone floor to damp proof, so while the concrete base was down I moved an engine into the living room for a while so it was nice and warm to work on she’s very tolerant with me Ray
My build thread http://www.defender2.net/forum/topic17615.html |
||
|
20th Jun 2020 4:07pm |
|
| mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769
|
Not wishing to sound like a second hand car sales man but there really was only light surface rust on the chassis
 I sanded up the surface rust and used the por15 metal prep and it came up well.
Click image to enlarge Click image to enlarge Click image to enlarge Then some of their rust proof paint Click image to enlarge Click image to enlarge I think it looks pretty snazzy! I’ll give it a week to dry when the panels are back together then spray some clear wax over it. Ray My build thread http://www.defender2.net/forum/topic17615.html |
||
|
20th Jun 2020 4:11pm |
|
| 90 Dreamer Member Since: 13 Jul 2019 Location: Oop North Posts: 2171  
|
Is that with a brush or spray on??
|
||
|
20th Jun 2020 6:16pm |
|
| mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769
|
It’s with a brush, it lays out quite well. Ray
My build thread http://www.defender2.net/forum/topic17615.html |
||
|
20th Jun 2020 9:09pm |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5208
|
If my dad had done that with the defender, with the ramp and axle stand, i tell you now i would be tell you lads a right old story Por15 is good stuff I am going to buy more of it for my chassis and for the 306, my dad's been using most of it for his. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back
Success is 90% Inspiration and 4 minutes Preparation # you can make it! Last edited by Procta on 23rd Jun 2020 8:35pm. Edited 1 time in total |
||
|
20th Jun 2020 11:13pm |
|
| mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769
|
It was pretty safe on the ramp and stand (it also had a jack under it too) I wanted it high enough to get under But needed the wheel of so I could paint the end of the axle and chassis.
The weather has been kind again so I managed to get most of the first side back together
Click image to enlarge Click image to enlarge Either tonight or tomorrow the other side will be stripped and then it’s painting the other chassis leg the painting bit is rather horrible and messy. Ray
My build thread http://www.defender2.net/forum/topic17615.html |
||
|
21st Jun 2020 3:39pm |
|
| Rosco Member Since: 03 Dec 2010 Location: Burntwood Posts: 1835 
|
Some great progress
Hope the weather stays as good as the forecast for you to get through the other side this week 2007 - Stornoway Grey 90 XS SW - Gone 2002 - Black Discovery II - Gone 2014 - Montalcino Red 110 XS SW |
||
|
22nd Jun 2020 7:38am |
|
| mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769
|
Thank you rosco
the weather has indeed been kind today so the other wing has been stripped off and again just surface rust on the chassis
Click image to enlarge All cleaned and prepped Click image to enlarge And painted building up tomorrow hopefully
Click image to enlarge Click image to enlarge Ray My build thread http://www.defender2.net/forum/topic17615.html |
||
|
22nd Jun 2020 5:23pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
