 | Home > My Defender > Grafty's Td5 90 |
 
|
|
|
| grafty99 Member Since: 15 Aug 2012 Location: North Devon Posts: 4795   
|
It's a one piece nose cone (as per adventure models). It replaces the centre panel. I got mine from eBay from powerfuluk
 2002 90 Td5 Station Wagon
1990 Vogue SE Triumph Tiger Explorer 1200 Td5 90 Thread http://www.defender2.net/forum/topic50767.html Tdi 110 Thread https://www.defender2.net/forum/topic69562.html RRC Thread http://www.defender2.net/forum/topic54492.html Instagram http://www.instagram.com/george_grafton |
||
21st Jun 2019 12:07pm |
|
| grafty99 Member Since: 15 Aug 2012 Location: North Devon Posts: 4795
|
Here you go
https://rover.ebay.com/rover/0/0/0?mpre=ht...1777398998 2002 90 Td5 Station Wagon 1990 Vogue SE Triumph Tiger Explorer 1200 Td5 90 Thread http://www.defender2.net/forum/topic50767.html Tdi 110 Thread https://www.defender2.net/forum/topic69562.html RRC Thread http://www.defender2.net/forum/topic54492.html Instagram http://www.instagram.com/george_grafton |
||
|
21st Jun 2019 1:07pm |
|
| grafty99 Member Since: 15 Aug 2012 Location: North Devon Posts: 4795
|
I'm going to leave it as is for now and see how I get on
2002 90 Td5 Station Wagon
1990 Vogue SE Triumph Tiger Explorer 1200 Td5 90 Thread http://www.defender2.net/forum/topic50767.html Tdi 110 Thread https://www.defender2.net/forum/topic69562.html RRC Thread http://www.defender2.net/forum/topic54492.html Instagram http://www.instagram.com/george_grafton |
||
|
21st Jun 2019 8:10pm |
|
| grafty99 Member Since: 15 Aug 2012 Location: North Devon Posts: 4795
|
A bit of maintenance today (well, I guess it's a repair actually).
I felt recently that the brakes were feeling a bit 'wooden'. Whilst I was poking around, under the bonnet, I discovered that my servo had developed a small crack by where the master cylinder bolts on. This crack must have been leaking atmospheric pressure into the servo - reducing the pedal assistance. Anyway I ordered a servo (which arrived in a TRW box) to discover I'd been sent a genuine lucas one - result
Fitted it this afternoon and what a difference its made! Pin sharp brakes again so I'm very pleased
 Click image to enlarge 2002 90 Td5 Station Wagon 1990 Vogue SE Triumph Tiger Explorer 1200 Td5 90 Thread http://www.defender2.net/forum/topic50767.html Tdi 110 Thread https://www.defender2.net/forum/topic69562.html RRC Thread http://www.defender2.net/forum/topic54492.html Instagram http://www.instagram.com/george_grafton |
||
|
27th Jun 2019 4:44pm |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5226
|
good stuff! its the little jobs like that really makes a difference. I am going to be bleeding the 306s brakes in two weeks time fingers crossed. They are a little spongy still, Also I will be looking at getting the car painted underneath too. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back
Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
27th Jun 2019 7:42pm |
|
| grafty99 Member Since: 15 Aug 2012 Location: North Devon Posts: 4795
|
3D printed myself a little mini me today. I based it on a puma but I might do another one with a Td5 bonnet. Also drew up a 110 to print off too
Click image to enlarge 2002 90 Td5 Station Wagon 1990 Vogue SE Triumph Tiger Explorer 1200 Td5 90 Thread http://www.defender2.net/forum/topic50767.html Tdi 110 Thread https://www.defender2.net/forum/topic69562.html RRC Thread http://www.defender2.net/forum/topic54492.html Instagram http://www.instagram.com/george_grafton |
||
|
30th Jun 2019 9:01pm |
|
| darthdicky Member Since: 02 Jul 2011 Location: Newton Abbot Posts: 78
|
Looks like your 90 was spotted...
Click image to enlarge |
||
|
17th Jul 2019 9:33pm |
|
| Roba71 Member Since: 07 Jun 2019 Location: Rangiora Posts: 16  
|
Love the 3d printer !!
|
||
|
17th Jul 2019 11:26pm |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5226
|
also shows its been watched too Defender TD5 90 ---/--- Peugeot 306 HDI hatch back Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
18th Jul 2019 4:55am |
|
| 90 Dreamer Member Since: 13 Jul 2019 Location: Oop North Posts: 2179 
|
looks very nice, have seen RR SVR's but wasn't aware of these so same question as above??
what sort of spec is it please? |
||
|
18th Jul 2019 7:16am |
|
| LandRoverAnorak Member Since: 17 Jul 2011 Location: Surrey Posts: 11324
|
It's not a real SVR but is a nicely modded TD5 by forum member, Grafty99. Have a read of his build thread here:
https://www.defender2.net/forum/topic50767.html Darren 110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak "You came in that thing? You're braver than I thought!" - Princess Leia |
||
|
18th Jul 2019 7:25am |
|
| Sulisuli Member Since: 30 Oct 2016 Location: South west Posts: 4799
|
It’s a cracking defender having seen it in the flesh so to speak
some amazing mods done by a gifted and very nice guy. 2015 HT XS 90
2008 SVX 90 2000 XS TD5 90 |
||
|
18th Jul 2019 5:18pm |
|
| 90 Dreamer Member Since: 13 Jul 2019 Location: Oop North Posts: 2179
|
Quite a long thread and only had time to skim some bits but looks a cracker..........
Silly question but whats the curved 'cover' on the front wing top?? |
||
|
18th Jul 2019 7:21pm |
|
| Sulisuli Member Since: 30 Oct 2016 Location: South west Posts: 4799
|
It’s a snow cowl to prevent snow getting into the heater air intake
2015 HT XS 90
2008 SVX 90 2000 XS TD5 90 |
||
|
18th Jul 2019 8:04pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
