↓ Advertise on Defender2 ↓

Home > Td5 > Td5 fuel pressure regulator - repair kit X8R
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
sherifsalem



Member Since: 02 Jan 2013
Location: Porto
Posts: 96

Portugal 2005 Defender 90 Td5 ST Java Black
Td5 fuel pressure regulator - repair kit X8R
Gents

Has anybody tried this repair kit from X8R which you can find on eBay ( they announce high quality components).....should I go this way , has anybody install it


 Happy Travel
www.thegippo.wordpress.com
Post #740174 12th Nov 2018 9:24pm
View user's profile Send private message View poster's gallery Reply with quote
NickMc



Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1624

Northern Ireland 2006 Defender 90 Td5 HT Bonatti Grey
I’ve tried these kits (not from that company) before on my own vehicle only to see if they worked and they didn’t last too long, think a lot depends on what part is leaking on yours and how good the body is (flat, ovaled out holes) the cleaner the better. Most of the time it’s the valve leaking.
Post #740194 12th Nov 2018 9:55pm
View user's profile Send private message View poster's gallery Reply with quote
Rich1968



Member Since: 03 Nov 2013
Location: Towcester
Posts: 79

United Kingdom 
Bought a Bosch FPR from Opie oils then a set of seals from ebay - less than £30.

Rich
Post #740207 12th Nov 2018 10:31pm
View user's profile Send private message View poster's gallery Reply with quote
4RF RDS



Member Since: 19 Jul 2015
Location: Ottawa
Posts: 933

Canada 2000 Defender 110 Td5 XS CSW Epsom Green
I’ve had that exact kit in my 2000 MY 10P motor for three years now with no issue at all. 2010 Range Rover MkIII Autobiography Super Charged (Idris)
2003 Range Rover Mk III (Desmond FitzWilliam)
2000 Defender 110 CSW TD5 (CTX)
1992 Range Rover Classic (Lizzy)
1972 Series III 300 Tdi (Stanwood)
1967 MGB GT

Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats.
H. L. Mencken (1880 - 1956)
Post #740213 12th Nov 2018 11:38pm
View user's profile Send private message View poster's gallery Reply with quote
sherifsalem



Member Since: 02 Jan 2013
Location: Porto
Posts: 96

Portugal 2005 Defender 90 Td5 ST Java Black
Hi All

thank you for your input, the valve is the one leaking in mine and the valve here is a Boch supposedly a good brand.

Just heard from my mechanic that these valves sometimes are not regulated properly at 4 bar which is the pressure coming from the fuel pump and can create other problem

so fair enough that somebody tried it and it worked Happy Travel
www.thegippo.wordpress.com
Post #740304 13th Nov 2018 5:18pm
View user's profile Send private message View poster's gallery Reply with quote
roel



Member Since: 08 Aug 2009
Location: Lelystad
Posts: 2039

Netherlands 2003 Defender 90 Td5 PU Caledonian Blue
I used X8R for my Disco 3 suspension air compressor. Good quality kit, so I won't have a problem using them for the td5 fuel pressure regulator. Roel

1984 90 2.5 na Diesel - RR V8 (1994-2001)
1997 Camel Trophy Discovery 300TDI (2001-2009)
2005 G4 Discovery III 4.4 V8 (2008-2018) It's gone but it still hurts.
2003 90 Td5 (2009-now)
Post #740331 13th Nov 2018 6:51pm
View user's profile Send private message View poster's gallery Reply with quote
landy andy



Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5700

2006 Defender 110 Td5 USW Zermatt Silver
Ordered some parts from them Sunday, so pleased to hear the good stuff.
Post #740396 13th Nov 2018 9:18pm
View user's profile Send private message View poster's gallery Reply with quote
gazman



Member Since: 17 Aug 2015
Location: Liverpool
Posts: 652

United Kingdom 2003 Defender 90 Td5 HT Alpine White
I'm afraid to say for me it didnt work. But mine was a Ebay not xk8

1st time out the seal I'd replaced failed. Luckily the kit had 2 seals so I did it again and it was fine. But then the diarprahm in the valve that came with the kit failed. Back on std lr one now 2014 - current ..... 2003 defender td5 90 (my car)
2009 - current .... 2005 zx10r
Post #740443 14th Nov 2018 7:44am
View user's profile Send private message View poster's gallery Reply with quote
sherifsalem



Member Since: 02 Jan 2013
Location: Porto
Posts: 96

Portugal 2005 Defender 90 Td5 ST Java Black
The repair kit did not work after doing all as far as i know correctly, seems like it is starting again to let some kind of oily mix out of the fitted valve (which is a boch)

the background is that i had the original on many years ago and then it failed and i fitted a new original one that again did not resist for a long time.( a couple of years) it was badly lately pouring out this oily mix

So i decided to keep the regulator and repair the valve which upon purging the system and starting the car, i noticed the next day a slight oily mist coming out from the valve

Do you have any ideas what could be wrong?

is it pressure? what should i be looking for ? what is causing the valve to leak or blow in such a short time?

thanx gents Happy Travel
www.thegippo.wordpress.com
Post #743055 29th Nov 2018 9:23pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums