DEFENDER2.NET - View topic - Grafty's Td5 90

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > My Defender > Grafty's Td5 90

Page 62 of 124

3 ...

63 ...

122

123

124

Print this entire topic ·

Procta

Member Since: 03 Dec 2016
Location: Sunderland
Posts: 5230

that's an idea that,

Defender TD5 90 ---/--- Peugeot 306 HDI hatch back

Success is 90% Inspiration and 4 minutes Preparation # you can make it!

4th Feb 2018 7:41pm

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4795

2002 90 Td5 Station Wagon
1990 Vogue SE
Triumph Tiger Explorer 1200
Td5 90 Thread http://www.defender2.net/forum/topic50767.html
Tdi 110 Thread https://www.defender2.net/forum/topic69562.html
RRC Thread http://www.defender2.net/forum/topic54492.html
Instagram http://www.instagram.com/george_grafton

4th Feb 2018 8:27pm

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4795

I started on the Alcantara again tonight. The mission, window trims

Click image to enlarge 2002 90 Td5 Station Wagon
1990 Vogue SE
Triumph Tiger Explorer 1200
Td5 90 Thread http://www.defender2.net/forum/topic50767.html
Tdi 110 Thread https://www.defender2.net/forum/topic69562.html
RRC Thread http://www.defender2.net/forum/topic54492.html
Instagram http://www.instagram.com/george_grafton

5th Feb 2018 9:46pm

Defendermatt

Member Since: 15 Sep 2016
Location: Derbyshire
Posts: 313

Lovely job. Maybe you can do mine

5th Feb 2018 9:50pm

LandRoverAnorak

Member Since: 17 Jul 2011
Location: Surrey
Posts: 11324

You've made some really neat mods to your 90, Grafty, but that's a bit too much for my taste

Darren

110 USW BUILD THREAD - EXPEDITION TRAILER - 200tdi 90 BUILD THREAD - SANKEY TRAILER - IG@landroveranorak

"You came in that thing? You're braver than I thought!" - Princess Leia

5th Feb 2018 9:55pm

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4795

I think once it's finished and installed you might change your mind LRA

It matches the headlining well and ties the interior together

5th Feb 2018 10:00pm

Defendermatt

Member Since: 15 Sep 2016
Location: Derbyshire
Posts: 313

Have you cut different shapes to fit the panel or is it a single piece moulded to shape?

6th Feb 2018 6:07am

AJC

Member Since: 30 Nov 2015
Location: Lancashire
Posts: 1366

grafty99 wrote:
Finally today (nearly 3 weeks after changing the coolant) I managed to get the last bit of air out of the coolant system on my defender. It was being VERY stubborn!

Symptoms were no heat from heaters at anything below 2k rpm. (Also false over heat displayed on dash once) no matter how much I tried the heater matrix kept holding onto some air.

Today I took the output hose off the heater matrix whilst it was running and managed to get the rest of the air out so I now get toasty air at tickover

Also a quick clean

I wanted to give mine a coolant change the other week, I was just going to pop bottom rad hose off and drain it that way, whilst on the ramp giving it a full service I looked up and realised there is absolutely no chance I'm getting my hands up to do that so I shelved it for another day.

6th Feb 2018 7:32am

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4795

Defendermatt wrote:
Have you cut different shapes to fit the panel or is it a single piece moulded to shape?

Yes it comes on a roll, I just shaped it over the trim and then cut off the excess

6th Feb 2018 8:03am

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4795

AJC wrote:
grafty99 wrote:
Finally today (nearly 3 weeks after changing the coolant) I managed to get the last bit of air out of the coolant system on my defender. It was being VERY stubborn!

Symptoms were no heat from heaters at anything below 2k rpm. (Also false over heat displayed on dash once) no matter how much I tried the heater matrix kept holding onto some air.

Today I took the output hose off the heater matrix whilst it was running and managed to get the rest of the air out so I now get toasty air at tickover

Also a quick clean

I wanted to give mine a coolant change the other week, I was just going to pop bottom rad hose off and drain it that way, whilst on the ramp giving it a full service I looked up and realised there is absolutely no chance I'm getting my hands up to do that so I shelved it for another day.

There is a drain screw in the bottom hose if you don't want to remove the hoses

6th Feb 2018 8:05am

AJC

Member Since: 30 Nov 2015
Location: Lancashire
Posts: 1366

I didn't know that, thanks very much

6th Feb 2018 8:34am

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4795

6th Feb 2018 10:43am

L110CDL

Member Since: 31 Oct 2015
Location: Devon
Posts: 10866

Will be finishing off our little ridging job tomorrow in Braunton and was going to pop over to yours if your there to put the kettle on grafty

Clayton.

1996 Golf Blue 300Tdi 110 Pick up.
Keeper.

6th Feb 2018 9:08pm

grafty99

Member Since: 15 Aug 2012
Location: North Devon
Posts: 4795

Yes will be in all day, we normally stop for a cuppa at 11 and 1 but feel free to come whenever you like

6th Feb 2018 9:57pm

L110CDL

Member Since: 31 Oct 2015
Location: Devon
Posts: 10866

Great, it will be in the afternoon and i will bring that package with me for you

Clayton.

1996 Golf Blue 300Tdi 110 Pick up.
Keeper.

6th Feb 2018 10:24pm

Page 62 of 124

3 ...

63 ...

122

123

124

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum