DEFENDER2.NET - View topic - Wiring up spots

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Wiring up spots

Page 1 of 1

Print this entire topic ·

chalky

Member Since: 09 May 2008
Location: Yorkshire
Posts: 483

2008 Defender 90 Puma 2.4 XS CSW Tonga Green

Wiring up spots

Right,
being a bit of a heavy handed bafoon when it comes round to the finer points of land rover ownership i am slightly dubious about wiring said units into my vehicles intricate wiring harness.

Oh and the fact that i will probably melt something ! set it on fire spike the ECU are also niggliing me a bit.

so, the question is do i do it

Or is this something that should be done by somebody who knows about vehicle wiring

DING !!

Is it spliced into the vehicles FULL beam or can it be dash mounted on a switch to come on regardless of the FULL beam being on or not.

I did see a while back some PIAA Spots that are to replace the WARN units on the 09 G4 vehicles.
These had a very trick switch that has a number 2 on that fits in the correct space on the dash.

Anyway,

as always any info will be much apreciated. DEFENDER XS CSW 08 TONGA GREEN

29th Nov 2008 6:30pm

mse

Member Since: 06 Apr 2008
Location: UK
Posts: 5035

2016 Defender 110 Puma 2.2 XS CSW Scotia Grey

The switch is apparently avaliable as a part on its own, except i keep getting it as Front Fog Light on parts.

That said - it definately comes as part of the aux. wiring kit which is costly at £90 but includes everything needed to make it work.

If you get the genuine LR spotlights from a dealer at £270 - they also come with them. Mike

29th Nov 2008 6:41pm

chalky

Member Since: 09 May 2008
Location: Yorkshire
Posts: 483

mike

you are the font of all knowledge !

the spots look pretty dismal from the dealer but the wiring for them looks pretty substantial !
That said and following on from our conversation last night, how much can you purchase the Loom for

And again following on from conversation EXPENSIVE as ever ! DEFENDER XS CSW 08 TONGA GREEN

29th Nov 2008 6:50pm

mse

Member Since: 06 Apr 2008
Location: UK
Posts: 5035

I wouldnt go that far...

I would have to go to "That dealer"! Ill ask next time im there
Its bigger items the savings are great - except a car which is 12% on top of other offers

Here you are:

YUG000540LNF – Front Fog switch, Check price check for Aux 2

Wiring loom £98.64

Have a look at GTR the public side for the fitting guide i have it in pdf if you want me to email it, just pm me Mike

29th Nov 2008 6:57pm

dm_td5

Member Since: 20 Jul 2008
Location: Arnhem Land
Posts: 609

2008 Defender 110 Puma 2.4 SW Zermatt Silver

Yes that's the part (YUG000540LNF) I made up a harness and the switch cost me about ₤8 including postage to Australia. Over here it's not even a listed part

Pin outs are:
1 feed
2 illumination (take from pin 2 on another switch - lights up with other dash lights then)
4 ground
5 line out to lights (relay)

It takes a black connector, which I couldn't get and which is part of the wiring harness that LR supply. 110 2.4TDCi
110 300Tdi

LROCV ::: AULRO.com

29th Nov 2008 10:05pm

mse

Member Since: 06 Apr 2008
Location: UK
Posts: 5035

So does that part come with the 2 and light symbol in it... as the pictures i cant tell! Mike

29th Nov 2008 10:16pm

dm_td5

Member Since: 20 Jul 2008
Location: Arnhem Land
Posts: 609

The pins on the switch are all numbered, bit hard to read as they are down inside the switch (against the respective pins) from memory its 1-5 right to left, but double check.

Yes that part does have the 2 and light symbol.

Found the other thread on the forum: http://www.defender2.net/forum/topic552.html?highlight=switch

Dave's 101 posted up some links to pic's of the switch in this thread. 110 2.4TDCi
110 300Tdi

LROCV ::: AULRO.com

29th Nov 2008 10:48pm

mse

Member Since: 06 Apr 2008
Location: UK
Posts: 5035

I wired a bank of those switches on my disco (they are the same as RR classic and d2

) both with genuine connectors and small crimped connectors - its not too hard as i recall.

thanks for the confirmation of switch facia type. Mike

29th Nov 2008 11:39pm

PaulMc

Member Since: 17 Jan 2009
Location: Kent
Posts: 500

I've posted some info on wiring YUG000540LNF in the Switch Fascia thread -

http://www.defender2.net/forum/topic552-15.html

Paul. Paul.
1989 Arles Blue 2.5TD 110 Hardtop
1999 Epsom Green Discovery II 4.0 V8i 'XS'

17th Jan 2009 11:12am

Grockle

Member Since: 24 Nov 2008
Location: Peak District National Park
Posts: 2266

We had the LR driving lamps fitted before collection at good price, the '2' switch is in the kit. 2.4 90 XS
1968 1/32 scale Britains 109 Pick up.

17th Jan 2009 11:50am

mse

Member Since: 06 Apr 2008
Location: UK
Posts: 5035

ive also i created a post a few weeks ago about fitting the switch http://www.defender2.net/forum/topic795.html Mike

17th Jan 2009 5:55pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum