 | Home > My Defender > What Did You Do In Your Defender Today |
 
|
|
|
| Pickles Member Since: 26 May 2013 Location: Melbourne Posts: 3784   
|
Gracie, our '13 90 S.W., got her yearly polish.
Took me all day, but I can take my time, & actually find it somewhat therapeutic! Pickles. |
||
30th Dec 2016 11:44pm |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5167 
|
went out for a quick run and then for some diesel.
 The other night me and my dad went out for a little cruse down out skirts of the northeast, just to charge the battery up and diagnose a few things. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back
Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
31st Dec 2016 12:45am |
|
| Procta Member Since: 03 Dec 2016 Location: Sunderland Posts: 5167
|
Where did you get your rear door card from, mine has seen better days. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back Success is 90% Inspiration and 4 minutes Preparation # you can make it! |
||
|
31st Dec 2016 2:11am |
|
| mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769  
|
That's just a standard from the factory rear door trim. Ray
My build thread http://www.defender2.net/forum/topic17615.html |
||
|
31st Dec 2016 9:01am |
|
| Augustus Member Since: 23 Mar 2016 Location: Carcassonne Posts: 86 
|
Airport run...
 Click image to enlarge |
||
|
31st Dec 2016 5:10pm |
|
| custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20368
|
Passed another 90, it was orange a Puma and from abroad. Definitely has LED headlights and sawtooth style due cut silver and black alloys.
Not sure what country it seemed to have a small plate, definitely typical. Also accidentally waved at a G wagon!  $W33T $0U7H3RN $UG4R
🇬🇧ðŸ´ó §ó ¢ó ¥ó ®ó §ó ¿ðŸ´ó §ó ¢ó ·ó ¬ó ³ó ¿ðŸ´ó §ó ¢ó ³ó £ó ´ó ¿ðŸ‡®ðŸ‡ªðŸ‡ºðŸ‡¸â›½ï¸ðŸ›¢ï¸âš™ï¸ðŸ§°ðŸ’ª |
||
|
31st Dec 2016 5:52pm |
|
| Iktank Member Since: 08 Nov 2014 Location: Porthcawl Posts: 237  
|
Fitted my Nak Corners and stainless mud flap brackets.
Bit of grinding and cutting required as the corners did not allow for fitting of mud flaps All came good in the end
Click image to enlarge Click image to enlarge |
||
|
31st Dec 2016 5:56pm |
|
| ericvv Member Since: 02 Jun 2011 Location: Near the Jet d'Eau Posts: 5816  
|
^^ Nak corners? Be careful, I recently dared to abbreviate this suppliers name to Naka, and someone on here took offense of that as it apparently would be disrespectful.
Well, let me make up for that.  Ich wünsche Peter und das ganse Nakatanenga team bei dieser einen guten Rutsch ins neue Jahr! 
Now back on topic. What did I do in my Defender today? We have nice dry cold winter weather here, and the Mrs. and myself took a few trips into town today with the SVX. Tonight after it got dark and the shops had closed, we made a nice long drive through a bunch of our villages to look at which one has the best Xmas lighting. And of course on some pitch dark country roads I checked if the headlights now are perfectly adjusted, this after two days ago I lowered them a bit. Seems all perfect now.
Eric You never actually own a Defender. You merely look after it for the next generation. http://youtu.be/yVRlSsJwD0o https://youtu.be/vmPr3oTHndg https://www.youtube.com/watch?v=_GtzTT9Pdl0 https://www.youtube.com/watch?v=ABqKPz28e6A https://www.youtube.com/watch?v=rLZ49Jce_n0 https://www.youtube.com/watch?v=XvAsz_ilQYU https://www.youtube.com/watch?v=K8tMHiX9lSw https://m.youtube.com/watch?v=dxwjPuHIV7I https://vimeo.com/201482507 https://www.youtube.com/watch?v=ZSixqL0iyHw Last edited by ericvv on 31st Dec 2016 6:30pm. Edited 1 time in total |
||
|
31st Dec 2016 6:18pm |
|
| Iktank Member Since: 08 Nov 2014 Location: Porthcawl Posts: 237
|
Thanks for that !
"^^ Nak corners? Be careful, I recently dared to abbreviate this suppliers name to Naka, and someone on here took offense of that as it apparently would be disrespectful. Rolling Eyes Well, let me make up for that. Whistle Ich wünsche Peter und das ganse Nakatanenga team einen guten Rutsch ins neue Jahr! Thumbs Up" Already sent Peter the same note wishing him a Merry Christmas and thank you for you kind note also, and the translation
Cannot find any rude or abusive translation for Nak, PC world we now live in. If i could spell the whole name correctly I would - I will however try harder Eric I wish you a Happy forth coming New Year Regards Ian |
||
|
31st Dec 2016 6:29pm |
|
| GREENI Member Since: 22 Aug 2010 Location: staffs Posts: 10382
|
Used Mrs Greeni's to get muddy today!
Last edited by GREENI on 2nd Jan 2017 6:18pm. Edited 1 time in total |
||
|
1st Jan 2017 2:24pm |
|
| excossack Member Since: 22 Feb 2012 Location: North West Posts: 5843 
|
Gave the 110 a wash but really needs another one and then a waxing (and probably a clay baring to remove some what looks like water stains on the paint work and some grease stains that wont wash off)
Got the top support mount in place for the dog guard In primer and drying (yesterday) Click image to enlarge Painted and fitted Click image to enlarge Now need to sort out the bottom mounts to stop the guard swinging around. 1999 Defender TD5 110 Regards John M0VAZ Econet Station 48 no clock |
||
|
1st Jan 2017 6:16pm |
|
| Augustus Member Since: 23 Mar 2016 Location: Carcassonne Posts: 86
|
Decided the first day of the year ought to contain some mountains.
Click image to enlarge Bumped into three (unrelated) UK plated Defenders in one small French village today. Doesn't happen very often round here. Was every other car in Sussex. |
||
|
1st Jan 2017 9:32pm |
|
| CamRSA Member Since: 24 Aug 2016 Location: Devon Posts: 66 
|
Spent a few hourrs on cosmetics, should have removed the old paint layer first but I didn't. Will do in the summer.
Click image to enlarge Click image to enlarge |
||
|
2nd Jan 2017 4:12pm |
|
| Sulisuli Member Since: 30 Oct 2016 Location: South west Posts: 4795 
|
Shortened the rear view mirror arm, installed the 99 relay to alter wiper delay, installed the CTEK comfort indicator panel.
2015 HT XS 90
2008 SVX 90 2000 XS TD5 90 |
||
|
2nd Jan 2017 4:44pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
