Home > Series Land Rovers > Started having bad thoughts about buying a S2 |
|
|
milesr3 Member Since: 12 Feb 2013 Location: Suffolk Posts: 873 |
Brake, clutch and throttle pedals and steering box back on this evening:
[URL=] Click image to enlarge[/URL] [URL=] Click image to enlarge[/URL] Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated |
||
4th May 2015 8:43pm |
|
milesr3 Member Since: 12 Feb 2013 Location: Suffolk Posts: 873 |
Tackled a job that I've been putting off today, but needs to be done before the nearside bulkhead to chassis bracket goes back on and gets in the way; drilled out the old exhaust studs, re-tapped and put some new ones in:
[URL=] Click image to enlarge[/URL] And trial fitted the exhaust system: [URL=] Click image to enlarge[/URL] Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated |
||
10th May 2015 5:36pm |
|
milesr3 Member Since: 12 Feb 2013 Location: Suffolk Posts: 873 |
I cleaned the mud off one of the wheels and wiped it over with some Corrosion Block (light oil): [URL=] Click image to enlarge[/URL] Have to say that there is a bit too much rusty steel and not enough paint on it to play the patina card...Really don't know what to do with them now and I didn't want to paint anything else. Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated |
||
11th May 2015 8:57am |
|
jomara Member Since: 26 Oct 2009 Location: Lanarkshire Posts: 1790 |
What about painting and patenating them?
2014 110 2.2TDCi XS Station wagon 1971 Bowler Tomcat 88 4.2 V8 Auto 2022 110 D250 XS Edition - Gone 2024 110 D250 X-Dynamic HSE |
||
11th May 2015 9:57am |
|
andydef90 Member Since: 09 Feb 2015 Location: yorkshire Posts: 617 |
im wanting one too looking at what you are doing is making my wallet wince
|
||
12th May 2015 12:44pm |
|
milesr3 Member Since: 12 Feb 2013 Location: Suffolk Posts: 873 |
As (half) expected, it is taking longer and costing more than I first imagined. But I did make a concious decision to do it properly, at least as far as my own abilities allow as I don't intend doing any of this work again soon and it's a very enjoyable project.
On the positive side, it would be nice to think that the end result will be worth at least what it has cost me to buy and recommission. It should have some value, being a 2-owner, completely original / matching numbers early S2 with 50k miles. |
||
12th May 2015 1:33pm |
|
milesr3 Member Since: 12 Feb 2013 Location: Suffolk Posts: 873 |
Do you like my fancy new wheels?
[URL=] Click image to enlarge[/URL] [URL=] Click image to enlarge[/URL] Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated |
||
22nd May 2015 7:00pm |
|
ian series 1 Member Since: 17 Nov 2014 Location: south Posts: 3127 |
Wheels look nice!
Where did you end up getting your Lassas? Keep up the good work, it's all worth it 80" 80" 86" 88" 90" Wanted, Forward Control Anything considered. |
||
22nd May 2015 7:09pm |
|
milesr3 Member Since: 12 Feb 2013 Location: Suffolk Posts: 873 |
Yes, I'm really pleased with how they came out. Have binned all paint brushes.
£59 from tyrewizard.co.uk: http://www.tyrewizard.co.uk/van-tyres-c12/...tyre-p4183 |
||
22nd May 2015 7:14pm |
|
mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769 |
Your wheel nuts on the close up of the wheel are the wrong way round Ray
My build thread http://www.defender2.net/forum/topic17615.html |
||
22nd May 2015 7:23pm |
|
SailingTom Member Since: 19 Nov 2013 Location: ESSEX Posts: 1722 |
Coming along beautifully
exactly how id do it with regards to just painting the bulkhead of bodywork. Are the wheel nuts the wrong way round though? My favourite topic on here at the moment, keep up the fab work and the updates. Very jealous |
||
22nd May 2015 7:24pm |
|
milesr3 Member Since: 12 Feb 2013 Location: Suffolk Posts: 873 |
They are tapered at both ends.
|
||
22nd May 2015 7:25pm |
|
ian series 1 Member Since: 17 Nov 2014 Location: south Posts: 3127 |
S1 and early S2s have the same tapered nuts on both ends.
Amazing how many people tell me the same thing 80" 80" 86" 88" 90" Wanted, Forward Control Anything considered. |
||
22nd May 2015 7:35pm |
|
SailingTom Member Since: 19 Nov 2013 Location: ESSEX Posts: 1722 |
At least its not just me then
|
||
22nd May 2015 8:00pm |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis