↓ Advertise on Defender2 ↓

Home > Puma (Tdci) > LED Rear Indicator Issue
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Landyawd



Member Since: 04 Sep 2014
Location: Surrey
Posts: 20
England 2011 Defender 90 Puma 2.4 HT Java Black
LED Rear Indicator Issue
OK so I am currently fitting a WIPAC LED light kit to my 2.4tdci....

All the lights are working except the nearside rear indicator I have installed the new relay supplied in the kit.

Paddocks kindly sent me out a replacement unit, still does not work....

I have put the old unit back on and it works fine.... Shocked

So with my limited knowledge im guessing its not a wiring issue as far as i can tell, the relay has been fitted and im presuming I have not got 2 faulty units....


Any Ideas, have i missed something silly?
Post #413543 3rd Apr 2015 4:32pm
View user's profile Send private message View poster's gallery Reply with quote
munch90



Member Since: 26 Oct 2013
Location: guildford
Posts: 3558
England 
wiring wrong way round

leds only work wired one way

so try swapping wires round in that light plug
Post #413546 3rd Apr 2015 4:51pm
View user's profile Send private message View poster's gallery Reply with quote
custom90



Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20292
United Kingdom 
As Munch mentions that'd be most likely.
Failing that, remove clean and refit earth strap and bolt for rear lighting on the transfer box.
The first suggestion is most likely though.

Could either be the lights you have wired opposite or maybe someone fitted another plug on the Landy with the wrong polarity.
Issue wouldn't show with an incandescent bulb as polarity doesn't matter but with LED's it does.
Post #413578 3rd Apr 2015 6:31pm
View user's profile Send private message View poster's gallery Reply with quote
leeds



Member Since: 28 Dec 2009
Location: West Yorkshire
Posts: 8580
United Kingdom 
Before swapping wiring around, remove one of the working indicators and fit the 'non working' indicator.

If 'non working' indicator suddenly works it is a polarity issue.


Can be slightly awkward to change wires in an ecoseal connector but spare connectors are only a couple of pounds.


Brendan
Post #413595 3rd Apr 2015 7:07pm
View user's profile Send private message View poster's gallery Reply with quote
munch90



Member Since: 26 Oct 2013
Location: guildford
Posts: 3558
England 
did you find problem ?
Post #413774 4th Apr 2015 3:56pm
View user's profile Send private message View poster's gallery Reply with quote
Landyawd



Member Since: 04 Sep 2014
Location: Surrey
Posts: 20
England 2011 Defender 90 Puma 2.4 HT Java Black
Ok well after a bit of a hectic weekend I finally got round to having another look....

Thank you all Bow down

The wiring was the wrong way round. I traced back to 2 bullet connectors and swapped them over. Weirdly the bullet connectors were taped up with. Electrical tape. Not sure if someone has played with them before... If not its just a standard defender wiring thing.

Anyway thanks again all Smile
Post #414072 5th Apr 2015 9:16pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums