![]() | Home > Maintenance & Modifications > fitting some puma seats in the rear of the td5 90 |
![]() ![]() |
|
|
dnorrishill Member Since: 15 Jul 2011 Location: Hampshire Posts: 615 ![]() ![]() ![]() |
Been busy then!!
![]() You beat me to it too, I just posted my pictures of the ebay advert doing this very modification! |
||
![]() |
|
T1G UP Member Since: 08 Dec 2009 Location: Bath Posts: 3101 ![]() ![]() ![]() |
you don't mess about Boy!
good idea that, makes the retro fitting of seats APOP! |
||
![]() |
|
Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478 ![]() ![]() ![]() |
yer dnorrishill just saw it lol
![]() ![]() ![]() ![]() |
||
![]() |
|
dnorrishill Member Since: 15 Jul 2011 Location: Hampshire Posts: 615 ![]() ![]() ![]() |
Stupid question, but I assume you have the seats, belts, etc. - were they expensive?
|
||
![]() |
|
Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478 ![]() ![]() ![]() |
lucky enough for me mate dad is removing his ones out of his new puma as he said they take up alot of space for what he uses his one for so happy days they cost me £0.00
![]() ![]() |
||
![]() |
|
ZeDefender Member Since: 15 Sep 2011 Location: Munich Posts: 4731 ![]() ![]() ![]() |
Lovely job
![]() Can't begin to tell you the problems you'd have doing such things in Germany - seriously cramps my creativity ![]() But shout it at them in German because life is also terrifying and confusing... |
||
![]() |
|
Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478 ![]() ![]() ![]() |
yer it is really unlucky for ya mate
![]() ![]() ![]() |
||
![]() |
|
bpman Member Since: 21 May 2008 Location: Oslo Posts: 8069 ![]() ![]() |
we're going to need more pictures killer90 !
where did you get the wheel arch fabrications from ? are they reinforced ? |
||
![]() |
|
Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478 ![]() ![]() ![]() |
more pics to come very soon
![]() ![]() ![]() ![]() |
||
![]() |
|
K9F Member Since: 12 Nov 2009 Location: Bournemouth Posts: 9610 ![]() ![]() ![]() |
Nice work Killer, surprised that you didn't 'wet assemble' the inserts whilst riveting them in, would have made a better seal!
Lucky with the seats too! Wanna pick six numbers for next weeks lottery for me? ![]() Treat every day as if it is your last....one day you will be right!! |
||
![]() |
|
Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478 ![]() ![]() ![]() |
![]() ![]() ![]() ![]() ![]() ![]() |
||
![]() |
|
Goldstar Member Since: 24 Oct 2011 Location: Yorkshire Peaks Posts: 10 ![]() ![]() ![]() |
Hi K90. Looks like a very neat job. I'm probably teaching you to suck eggs but the Puma has a tiebar or tube that connects between the rear crossmember and the underside of the wheelarch. Its held in place by a square plate with 4 bolts welded on it, a torx bolt and the lower seat belt anchor bolt i.e. 6 fixings. 2 torx bolts through the crossmember complete the fixing. Landrover say this is essential for the safety of the rear seat and belt installation. If you need further info I have pics from the job I did installing Puma seats into the load area of a 5 seat Puma.
|
||
![]() |
|
Killer90 Site Sponsor Member Since: 09 Oct 2011 Location: Hertfordshire Posts: 6478 ![]() ![]() ![]() |
cheers matey yer already know about the bar but thanks anyways
![]() ![]() |
||
![]() |
|
WarPig Member Since: 04 Dec 2009 Location: Sheffield Posts: 1748 ![]() ![]() ![]() |
Killer, your 90 looks amazing
![]() |
||
![]() |
|
![]() ![]() |
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
![](../images/layout/footer/disclaimer.gif)