↓ Advertise on Defender2 ↓

Home > Maintenance & Modifications > Ashcroft LT230 1.100 Gear Set
Post Reply  Down to end
Page 1 of 2 12>
Print this entire topic · 
Naks



Member Since: 27 Jan 2009
Location: Stellenbosch, ZA
Posts: 2638

South Africa 2010 Defender 90 Puma 2.4 SW Alpine White
Ashcroft LT230 1.100 Gear Set
Gents, my transfer case needs to be rebuilt, the vibrations/backlash/whining are starting to sound quite terrible.

While it's out, I was thinking of swapping the internals for the Ashcroft 1.100 gear set: https://ashcroft-transmissions.co.uk/product/1-100-gear-set/

Has anyone else with a remapped (BAS) 90 2.4 done this and can provide feedback?

Thanks very much Thumbs Up --
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged



Defender Puma Workshop Manual: https://bit.ly/2zZ1en9
Discovery 4 Workshop Manual: https://bit.ly/2zXrtKO
Range Rover/Sport L320/L322/L494 Workshop Manual: https://bit.ly/2zc58JQ
Post #1050942 7th Nov 2024 6:46am
View user's profile Send private message View poster's gallery Reply with quote
MK



Member Since: 28 Aug 2008
Location: Santiago
Posts: 2414

Chile 2007 Defender 110 Puma 2.4 SW Chawton White
Since you will strip it down, you can take the opportunity to fit a central ATB. The Std central diff is a big source of slack in the transmission. And if you drive in a very hot region, the bigger sump is also a plus to keep your oil away from coocking itself.

Any reason you do not like the factory spec ratio? Puma 110" SW

.............................................................
Earth first. Other planets later
Post #1050954 7th Nov 2024 11:20am
View user's profile Send private message View poster's gallery Reply with quote
jst



Member Since: 14 Jan 2008
Location: Taunton
Posts: 8013

 2011 Defender 110 Puma 2.4 USW Stornoway Grey
what size tyres are you running, do you tow and how heavy is the vehicle? whats its main use. on std setup diff, tyres thats roughly a 200rpm drop in top gear.

i have a 1.003 in my 90 on an m57. 255.85s and 4.11s so diff/tyres cancel each other out. that works well but would go anymore. 1.1 may work fine depending on usage. Cheers

James
110 2012 XS Utility
130 2011 M57 bespoke Camper
90 2010 Hardtop
90 M57 1988 Hardtop
Post #1050964 7th Nov 2024 11:58am
View user's profile Send private message View poster's gallery Reply with quote
Naks



Member Since: 27 Jan 2009
Location: Stellenbosch, ZA
Posts: 2638

South Africa 2010 Defender 90 Puma 2.4 SW Alpine White
MK wrote:
Since you will strip it down, you can take the opportunity to fit a central ATB. The Std central diff is a big source of slack in the transmission. And if you drive in a very hot region, the bigger sump is also a plus to keep your oil away from coocking itself. Any reason you do not like the factory spec ratio?



Hmm, not sure I have the budget for the central ATB. I already have the Ashcroft HD Cross Pin and Output Shaft kit, and both front & rear diffs have an ATB.

Since my 90 is remapped, I often find myself trying to change up from 6th on the highway Whistle --
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged



Defender Puma Workshop Manual: https://bit.ly/2zZ1en9
Discovery 4 Workshop Manual: https://bit.ly/2zXrtKO
Range Rover/Sport L320/L322/L494 Workshop Manual: https://bit.ly/2zc58JQ
Post #1050977 7th Nov 2024 12:40pm
View user's profile Send private message View poster's gallery Reply with quote
Naks



Member Since: 27 Jan 2009
Location: Stellenbosch, ZA
Posts: 2638

South Africa 2010 Defender 90 Puma 2.4 SW Alpine White
jst wrote:
what size tyres are you running, do you tow and how heavy is the vehicle? whats its main use. on std setup diff, tyres thats roughly a 200rpm drop in top gear.

i have a 1.003 in my 90 on an m57. 255.85s and 4.11s so diff/tyres cancel each other out. that works well but would go anymore. 1.1 may work fine depending on usage.



I run 235/85R16, I don't tow, and vehicle is pretty light, mostly setup for 4x4 trails.

I just find the 2500rpm on the highway a bit too stressful on the drivetrain. --
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged



Defender Puma Workshop Manual: https://bit.ly/2zZ1en9
Discovery 4 Workshop Manual: https://bit.ly/2zXrtKO
Range Rover/Sport L320/L322/L494 Workshop Manual: https://bit.ly/2zc58JQ
Post #1050978 7th Nov 2024 12:42pm
View user's profile Send private message View poster's gallery Reply with quote
MK



Member Since: 28 Aug 2008
Location: Santiago
Posts: 2414

Chile 2007 Defender 110 Puma 2.4 SW Chawton White
Not sure about the stress on the drivetrain, except maybe for the transfer case getting too hot and therefore degrading the oil quite fast. So the bigger sump may help to reduce the temperature. In my case I also wrapped a portion of the exhaust tube with insolation tape in front and side of the transfer case.

As for the engine at 2500 rpm, it wont do any harm and it will ensure high oil pressure. Puma 110" SW

.............................................................
Earth first. Other planets later
Post #1050979 7th Nov 2024 12:52pm
View user's profile Send private message View poster's gallery Reply with quote
jst



Member Since: 14 Jan 2008
Location: Taunton
Posts: 8013

 2011 Defender 110 Puma 2.4 USW Stornoway Grey
Naks wrote:
jst wrote:
what size tyres are you running, do you tow and how heavy is the vehicle? whats its main use. on std setup diff, tyres thats roughly a 200rpm drop in top gear.

i have a 1.003 in my 90 on an m57. 255.85s and 4.11s so diff/tyres cancel each other out. that works well but would go anymore. 1.1 may work fine depending on usage.



I run 235/85R16, I don't tow, and vehicle is pretty light, mostly setup for 4x4 trails.

I just find the 2500rpm on the highway a bit too stressful on the drivetrain.


I believe 1.1 would work well in that situation. I tend to sit a bit slower around 2000rpm which is comfortable for me. Cheers

James
110 2012 XS Utility
130 2011 M57 bespoke Camper
90 2010 Hardtop
90 M57 1988 Hardtop
Post #1051030 7th Nov 2024 9:37pm
View user's profile Send private message View poster's gallery Reply with quote
Naks



Member Since: 27 Jan 2009
Location: Stellenbosch, ZA
Posts: 2638

South Africa 2010 Defender 90 Puma 2.4 SW Alpine White
Thanks chaps, gear set ordered, and I've also added the sump extension to the order.

I really did not have enough to order the central ATB, but I will save up for the next time the transfer box has an issue Whistle --
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged



Defender Puma Workshop Manual: https://bit.ly/2zZ1en9
Discovery 4 Workshop Manual: https://bit.ly/2zXrtKO
Range Rover/Sport L320/L322/L494 Workshop Manual: https://bit.ly/2zc58JQ
Post #1051040 8th Nov 2024 7:37am
View user's profile Send private message View poster's gallery Reply with quote
Zed



Member Since: 07 Oct 2017
Location: In the woods
Posts: 3261

United Kingdom 2010 Defender 110 Puma 2.4 XS CSW Santorini Black
That’s really interesting, let us how you get on. Usually the complaint is the opposite with revs being to low when motorway cruising. Some even swap out 6th gear for the lower ratio transit version which pushes up revs further to relieve excess wear on the main shaft. WARNING.
This post may contain sarcasm.
Post #1051041 8th Nov 2024 7:55am
View user's profile Send private message View poster's gallery Reply with quote
Naks



Member Since: 27 Jan 2009
Location: Stellenbosch, ZA
Posts: 2638

South Africa 2010 Defender 90 Puma 2.4 SW Alpine White
Right, but mine is remapped + various other mods, so when I'm cruising on the highway, I often try to change up a gear from 6th to 7th 🤣 --
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged



Defender Puma Workshop Manual: https://bit.ly/2zZ1en9
Discovery 4 Workshop Manual: https://bit.ly/2zXrtKO
Range Rover/Sport L320/L322/L494 Workshop Manual: https://bit.ly/2zc58JQ
Post #1051043 8th Nov 2024 8:29am
View user's profile Send private message View poster's gallery Reply with quote
MatLandy



Member Since: 11 Sep 2020
Location: Paris
Posts: 184

France 2008 Defender 110 Puma 2.4 CSW Zermatt Silver
On my 110 (Puma 2.4) I have the BAS 165BHP map + BAS Hi-flow intercooler + BAS silicone hoses + modified Airbox. With the added power on tap, I swapped the transfer box 4 years ago for an Ashcroft one with 1.1 ratio (instead of standard 1.2) and ATB. Tyres are BFGs AT K02 265/75 so same diameter as factory fitted 235/85.

I do not regret it a bit. The 1.1 ratio matches perfectly the extra power in my opinion, improves the 1st gear that was too short for my usage (I don't tow), enables cruising "more quietly" on french motorways at 130km/h speed -limit here- at just below 2500rpm in 6th (vs. more than 2700rpm with 1.2 ratio).

/Mat
Post #1051050 8th Nov 2024 9:14am
View user's profile Send private message View poster's gallery Reply with quote
Naks



Member Since: 27 Jan 2009
Location: Stellenbosch, ZA
Posts: 2638

South Africa 2010 Defender 90 Puma 2.4 SW Alpine White
Thanks Mat, that's almost exactly how mine is nodded, so the perfect use case. --
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged



Defender Puma Workshop Manual: https://bit.ly/2zZ1en9
Discovery 4 Workshop Manual: https://bit.ly/2zXrtKO
Range Rover/Sport L320/L322/L494 Workshop Manual: https://bit.ly/2zc58JQ
Post #1051053 8th Nov 2024 9:20am
View user's profile Send private message View poster's gallery Reply with quote
ashtrans
Site Sponsor


Member Since: 08 Nov 2008
Location: Harpenden
Posts: 257

United Kingdom 
Thanks for the order,

this is the type of application we made this kit for,

let us know what you think, Dave
Post #1051069 8th Nov 2024 1:00pm
View user's profile Send private message View poster's gallery Reply with quote
MK



Member Since: 28 Aug 2008
Location: Santiago
Posts: 2414

Chile 2007 Defender 110 Puma 2.4 SW Chawton White
I ordered the LT230 bigger sump for my 110" Puma quite a while. Yesterday I "presented" it to the transfer box and now I am wondering if the exhaust pipe will bang it under severe vibration. Puma 110" SW

.............................................................
Earth first. Other planets later
Post #1051070 8th Nov 2024 1:14pm
View user's profile Send private message View poster's gallery Reply with quote
Zed



Member Since: 07 Oct 2017
Location: In the woods
Posts: 3261

United Kingdom 2010 Defender 110 Puma 2.4 XS CSW Santorini Black
Naks wrote:
Right, but mine is remapped + various other mods, so when I'm cruising on the highway, I often try to change up a gear from 6th to 7th 🤣


Blimey! What is the speed limit there? I don’t think I have ever got near the rev limiter in 6th. WARNING.
This post may contain sarcasm.
Post #1051090 8th Nov 2024 5:44pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 2 12>
All times are GMT

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums