DEFENDER2.NET - View topic - 3rd brake light element in glass

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > 3rd brake light element in glass

Page 1 of 1

Print this entire topic ·

MR_JAMES

Member Since: 10 Oct 2013
Location: ESSEX
Posts: 248

2011 Defender 90 Puma 2.4 XS CSW Stornoway Grey

3rd brake light element in glass

The Rubber seal seems to have rubbed on the element in the rear window glass so the brake light doesn't work. I can't see any marks on it, but 12v stops at this point. Bypassing this point and the bulb illuminates.

In the past on the mini i used the paint on granville electro connector, the paint on stuff and that worked well for the heater element - but will it work for a 21w bulb? 1953 80"
1987 mini city e
2011 90"

4th Sep 2024 8:32pm

Ads90

Member Since: 16 Jun 2008
Location: Cots-on-the-Wolds
Posts: 809

2007 Defender 90 Puma 2.4 CSW Keswick Green

Think this is a common issue, I ran a wire from the spade connector at the bottom, tucked under the window seal all the way around to the light fitting at the top to bypass the problem. Works well and almost invisible.

4th Sep 2024 9:21pm

MR_JAMES

Member Since: 10 Oct 2013
Location: ESSEX
Posts: 248

Update! the brush on stuff worked a treat! I've put some electrical tape over where the rubber goes so hopefully that will never happen again. 1953 80"
1987 mini city e
2011 90"

8th Sep 2024 8:12pm

ASBGuernsey

Member Since: 14 Jul 2024
Location: Guernsey
Posts: 10

2012 Defender 90 Puma 2.4 XS CSW Zambezi Silver

I bought some sticky copper wiring off amazon - works a treat

12th Sep 2024 12:26pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum