 | Home > General & Technical (L663) > GAP Diagnostic IIDTool Announcement |
 
|
|
|
| tooth_dr Member Since: 26 May 2021 Location: Northern Ireland Posts: 236  
|
My rear PDC has stopped working, but the front still works, however the front doesnt autoactivate like it used to when you get close to a wall etc. I cant say that it corresponds to be trying to activate auto parking but i suspect it's related. Does anyone have the default settings for PDC? Its going in for a service in 4 weeks time so want to eliminate anything that I may have turned on or off.
Cheers! |
||
7th Aug 2024 3:50pm |
|
| lightning Member Since: 23 Apr 2009 Location: High Peak, Derbyshire Posts: 2758 
|
Have you cleared the fault codes with the GAP tool, and do they still come back?
|
||
|
7th Aug 2024 6:51pm |
|
| mohd Member Since: 13 Jun 2024 Location: uae Posts: 9 
|
I tried to clear them but they come back and the emergency brake off sign stays there, they only go after turning off the engine and back on
|
||
|
7th Aug 2024 6:53pm |
|
| malibu Member Since: 11 Sep 2023 Location: Melbourne Posts: 49 
|
What version of the GAP tool are you using and is the firmware up to date.
|
||
|
7th Aug 2024 11:08pm |
|
| mohd Member Since: 13 Jun 2024 Location: uae Posts: 9
|
I’m using G4 and yes its updated
|
||
|
8th Aug 2024 3:15am |
|
| H1Tad Member Since: 20 Jul 2024 Location: Maine Posts: 113 
|
Apologies if this has been covered in the past - I promise I searched first but couldn't find a post detailing this...
Has anyone ever run into issues using the GAP tool to enable features then brought their L663 into the dealership for warranty work and be denied based on the fact that the GAP tool was used? I have a 1800 mile long trip in September and I would dearly love if I had ACC enabled for it but I'm not going to sacrifice my 2 years and 25,000 miles left on my warranty to do it. 2022 Defender 110 SE P400 Tasman Blue Expedition and Cold weather package 2003 Hummer H1 P400 Firehouse Red 2008 Toyota FJ Cruiser |
||
|
8th Aug 2024 11:43am |
|
| pjeski Member Since: 25 Jul 2023 Location: Michigan Posts: 107
|
No one can say how your dealer will react, but there's no reason for them to care, only JLR would. The dealer isn't going to check that your cruise is adaptive, or anything else.
I've had my car in to the dealer for warranty service and my changes have neither been noticed nor disturbed, and that includes the IDD retrofit. Also in the US, the magnuson moss warranty act limits what they can deny warranty over. I think you'll be fine. |
||
|
8th Aug 2024 1:15pm |
|
| H1Tad Member Since: 20 Jul 2024 Location: Maine Posts: 113
|
Thank you.
I'll place my order for the GAP tool in a few days. 2022 Defender 110 SE P400 Tasman Blue Expedition and Cold weather package 2003 Hummer H1 P400 Firehouse Red 2008 Toyota FJ Cruiser |
||
|
8th Aug 2024 2:11pm |
|
| jwilliexd Member Since: 11 Jul 2024 Location: United States Posts: 3 
|
I had mine activated (along with a whole host of other things) and the vehicle has been to multiple dealers since...none of them have said anything. |
||
|
9th Aug 2024 12:58am |
|
| Jamundo86 Member Since: 24 Oct 2023 Location: Northamptonshire Posts: 18
|
Looking to purchase the G4 tool, but first wondered if anyone has one to sell, preferably Northampton/Midlands way so could pick up?
|
||
|
15th Aug 2024 9:54pm |
|
| proscoe33 Member Since: 01 Aug 2024 Location: Philadelphia Posts: 7
|
I have updated both CCFs with my G4 tool on my 2024 130 without locking gas cap and cannot get the option is setting on Pivi under safety and security to stay on. I see both options now in the setting screen but when I select them them and close out and the reopen they are both unselected. Any ideas?
|
||
|
18th Aug 2024 4:45pm |
|
| proscoe33 Member Since: 01 Aug 2024 Location: Philadelphia Posts: 7
|
I have updated both CCFs with my G4 tool on my 2024 130 without locking gas cap and cannot get the option is setting on Pivi under safety and security to stay on. I see both options now in the setting screen but when I select them them and close out and the reopen they are both unselected. Any ideas?
|
||
|
18th Aug 2024 4:45pm |
|
| Bobbobbobbob Member Since: 04 Jul 2023 Location: Brum Posts: 20
|
Not sure but I'm guessing you're talking about the approach and walk away locking.
The reason I say this is that this happened to me, I left them activated though and tried again a few weeks later when I remembered I'd done it. Anyway it works fine now and I definitely didn't change anything else. |
||
|
18th Aug 2024 6:49pm |
|
| DefenderMidlands Member Since: 08 Mar 2023 Location: West Midlands Posts: 225
|
Lock it up and leave it overnight. Possibly reset pivi also. It will start to work MY23 D250 Defender 110 X-Dynamic SE, Carpathian Grey, 7 Seat, Electric Towbar
|
||
|
18th Aug 2024 7:28pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
