DEFENDER2.NET - View topic - Defender 90 puma low milage but was used on a farm.

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > My Defender > Defender 90 puma low milage but was used on a farm.

Page 1 of 4

Print this entire topic ·

Landy addict

Member Since: 03 Dec 2022
Location: Argyll
Posts: 75

Defender 90 puma low milage but was used on a farm.

Thought I would share my project on here I have been working on it so about half way through now, but I have some photos from the beginning. It is a 2009 90 with 46k & FSH it belonged to a farmer from new so probably spent most its life off road & covered in dung & that stuff is like acid to steel & Alloy. Photo below is from a couple of year ago when I first got it I didn't realise how bad it was going to be (I bet some of you are laughing right now at that comment) & I should have known better as I have had defenders before.

Click image to enlarge

Below photo is when I finished the shed land rover is sitting more or less in same place as photo above

Click image to enlarge

during an inspection I saw the dreaded rear crossmember rot further investigation was frustrating as it turned out there was more in other parts of the chassis so started stripping it down

Click image to enlarge

26th Aug 2023 9:04pm

Welshsurferdude

Member Since: 23 Feb 2012
Location: Newport
Posts: 2456

love these project and great shed!

Im currently awaiting planning to build a similar sized shed for my back garden! 2011 Santorini Black USW XS.

2015 Discovery 4.5 Black pack Firenze red XS

26th Aug 2023 9:24pm

Moo

Member Since: 01 Oct 2021
Location: UK
Posts: 1471

I now have serious shed envy!

Eiger Grey MY23 D250 SE with bits. Known as Noddy.

26th Aug 2023 10:14pm

Procta

Member Since: 04 Dec 2016
Location: Sunderland
Posts: 5276

Nice fords!! love the escort!!!
me and my dad would kill for a shed like that, a couple of drive on ramps in there, racking for spare parts and oils. A proper be a proper work shop. Defender TD5 90 ---/--- Peugeot 306 HDI hatch back

In the words of my Good Friend, Gary Forrest 1980 -2025
" we will work something out"

27th Aug 2023 2:13am

Landy addict

Member Since: 03 Dec 2022
Location: Argyll
Posts: 75

Thanks for the comments I have only just got the building warrant for the shed there was a lot of restrictions as to what I could put in, now I can start fitting it out. First thing will be a 2 post ramp as my knees are struggling kneeling or laying on the floor to work on things (that's what getting old does

). I joined it onto my garage & put an access door through so most of my stuff is still in there at the moment. I have got to say respect to all you guys that does this kind of project in a single garage or even worse on the driveway, I am still tripping over things with all this space.

Click image to enlarge

27th Aug 2023 9:58am

TexasRover

Member Since: 24 Nov 2022
Location: Paris
Posts: 1236

2002 Defender 110 Td5 DCPU Chawton White

Nice shed! Oh yeah and also nice Landrover.

Must be nice working on a Landrover in SUCH A NICE SHED!

Some people have it all..

27th Aug 2023 5:35pm

Landy addict

Member Since: 03 Dec 2022
Location: Argyll
Posts: 75

When I started cleaning the axles I found that they were also rotten.

Click image to enlarge

Click image to enlarge

Someone had sealed the leak with filler / liquid metal or something had noticed it seeping just after I got it but thought it was just a seal

Click image to enlarge

29th Aug 2023 1:14pm

geobloke

Member Since: 06 Nov 2012
Location: Nottinghamshire
Posts: 4410

Blimey are they rusted or what

29th Aug 2023 1:18pm

Landy addict

Member Since: 03 Dec 2022
Location: Argyll
Posts: 75

New chassis & some other bits I got for the rebuild

Click image to enlarge

29th Aug 2023 2:17pm

Jim1988

Member Since: 26 Oct 2017
Location: Derbyshire
Posts: 256

Wow this is going to be a great one to follow. PS nice shed 😬, wise investment 👌. Thanks Jim.

29th Aug 2023 6:51pm

Landy addict

Member Since: 03 Dec 2022
Location: Argyll
Posts: 75

Starting the prep for the re-build, first I power washed & de-greased the galvanisation next coated it all in T-wash ready for paint. I didn't want the silver look for the chassis I also went for the Marsland chassis because it is basically identical to the original LR one also has chassis number in correct place.

Click image to enlarge

29th Aug 2023 7:31pm

Landy addict

Member Since: 03 Dec 2022
Location: Argyll
Posts: 75

some other bits for the build

all the wheel bearings front & back

Click image to enlarge

Springs from Alive tuning along with the new Alive / Bilstein shocks (these are meant to be softer than standard Bilstein but harder that Fox)

Click image to enlarge

Click image to enlarge

bush kit

Click image to enlarge

29th Aug 2023 7:53pm

NickMc

Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1681

That’s going to be lovely when it’s done.

Did you have the axle casing galvanised yourself? I’m contemplating doing mine. Where’d you buy the galvanised brake disc shields from?

29th Aug 2023 8:08pm

Landy addict

Member Since: 03 Dec 2022
Location: Argyll
Posts: 75

I got the disc shields from YRM this is the link https://yrmit.co.uk/product/hdg-rear-mudsh...er-d1-rrc/ my both axles where completely shot so had to replace them got them from KD-LR same place I got the chassis Karol & Gemma there couldn't be more helpful.

29th Aug 2023 9:02pm

Landy addict

Member Since: 03 Dec 2022
Location: Argyll
Posts: 75

First coated items with a coat of epoxy primer grey

Click image to enlarge

Then 2x coats epoxy chassis black

Click image to enlarge

30th Aug 2023 10:06am

Page 1 of 4

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum