DEFENDER2.NET - View topic - Where to Grease

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Where to Grease

Page 1 of 1

Print this entire topic ·

Phillywilly72

Member Since: 29 Apr 2024
Location: Wiltshire
Posts: 45

2011 Defender 110 Puma 2.4 DCPU Tamar Blue

Where to Grease

New Puma owner here, where are the key areas with and without nipples to regularly grease up?
So far I have the Propshafts, trackrod end, swivel joints, door hinges? Looking to accumulate a list for an annual top up!

11th May 2024 4:46pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20279

A frame ball joint if* it is a greaseable type. (Emphasis upon if it is).
Light oil the turbo actuator pivots.

When you say props, if earlier type that includes the central slider and UJ each end of the Prop.
If there isn’t a slider nipple (in the centre) then each UJ each end.

You can see if you have a thread in the clutch pedal box to fit a nipple in there, it’s on the RHS.
If you do, it only really needs one pump of grease rarely or you’ll end up with a gloop of it on the floor. ⭐️⭐️God Bless the USA 🇬🇧🇺🇸 ⭐️⭐️

11th May 2024 5:04pm

Phillywilly72

Member Since: 29 Apr 2024
Location: Wiltshire
Posts: 45

Thanks

12th May 2024 7:32am

landy andy

Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5648

2006 Defender 110 Td5 USW Zermatt Silver

Lub the steering shaft uj’s too.

You may have grease points on the steering ball joints.

12th May 2024 7:39am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum