DEFENDER2.NET - View topic

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > My Defender > Lizzy

Page 2 of 8

Print this entire topic ·

steveww

Member Since: 05 Jan 2022
Location: Uppingham
Posts: 567

2015 Defender 110 Puma 2.2 XS CSW Bronze Green

I had a look this morning and the paint code is 865 which I believe is Havana Metallic.

8th Feb 2022 9:28am

PhilWilson

Member Since: 20 Oct 2021
Location: North East
Posts: 14

Yes, definitely Havana, I have the same, looks great!

8th Feb 2022 9:34am

L110CDL

Member Since: 31 Oct 2015
Location: Devon
Posts: 10742

Welcome with a very nice colour 110

1996 Golf Blue 300Tdi 110 Pick up.

Keeper.

Clayton.

9th Feb 2022 9:32pm

steveww

Member Since: 05 Jan 2022
Location: Uppingham
Posts: 567

I have a seat rail extender to give me a bit of extra leg room. However, with the driver's seat in my normal position the rear seats will not fold down due to catching on the back of the driver's seat. I have to slide the driver's seat forward then try to remember where it was set.

Now I've installed a memory driver's seat. Only took a few seconds and no electrickery required

Click image to enlarge

19th Feb 2022 3:27pm

L110CDL

Member Since: 31 Oct 2015
Location: Devon
Posts: 10742

Those are the best mods, easy, quick and free

1996 Golf Blue 300Tdi 110 Pick up.

Keeper.

Clayton.

21st Feb 2022 8:22pm

steveww

Member Since: 05 Jan 2022
Location: Uppingham
Posts: 567

I've been working on a little Arduino based display for CAN data to go in the blank space on the rev counter.

At the moment it shows manifold pressure. Turbo boost to the right and vacuum on the left. Under that ambient and engine temperature. Still investigating other possible data.

At the moment I'm just using a little OLED that I had in my workshop. I'm investigating a larger OLED. As the code matures, I'll publish it to GitHub. Stay tuned.

Click image to enlarge

3rd Mar 2022 4:45pm

Screbble

Member Since: 26 Apr 2015
Location: Lancashire
Posts: 2098

2004 Defender 90 Td5 XS CSW Zambezi Silver

Like others I’m an admirer (and jealous) of both your lovely new Defender and it’s lovely wooden home

3rd Mar 2022 5:33pm

Cubflyer

Member Since: 25 Sep 2021
Location: Suffolk
Posts: 278

Lovely Defender Steve ... Hope it brings you lots of pleasure and little hassel

John 2010 Defender 90 300Tdi CW (White/1994)
2021 Defender 90 300Tdi SW (Blue/1994)

3rd Mar 2022 7:08pm

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3414

2012 Defender 90 Puma 2.2 CSW Santorini Black

steveww wrote:
I've been working on a little Arduino based display for CAN data to go in the blank space on the rev counter.

At the moment it shows manifold pressure. Turbo boost to the right and vacuum on the left. Under that ambient and engine temperature. Still investigating other possible data.

At the moment I'm just using a little OLED that I had in my workshop. I'm investigating a larger OLED. As the code matures, I'll publish it to GitHub. Stay tuned.

Click image to enlarge

I like this project. I trust that you know what you are doing and that it is not the real engine temperature

Will be watching with great interest. 1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

3rd Mar 2022 7:12pm

90 Dreamer

Member Since: 13 Jul 2019
Location: Oop North
Posts: 2147

2016 Defender 90 Puma 2.2 HT Corris Grey

steveww wrote:
I've been working on a little Arduino based display for CAN data to go in the blank space on the rev counter.

At the moment it shows manifold pressure. Turbo boost to the right and vacuum on the left. Under that ambient and engine temperature. Still investigating other possible data.

At the moment I'm just using a little OLED that I had in my workshop. I'm investigating a larger OLED. As the code matures, I'll publish it to GitHub. Stay tuned.

Click image to enlarge

Is it something yout doing for yourself or hoping to offer it out?? Looks very interesting

3rd Mar 2022 8:08pm

steveww

Member Since: 05 Jan 2022
Location: Uppingham
Posts: 567

Dinnu wrote:
I like this project. I trust that you know what you are doing and that it is not the real engine temperature Will be watching with great interest.

No it's not real data. I have another Arduino on the CAN bus sending test data. This allows me to do development work inside in the warm and not freezing in the garage.

I'm using off the shelf components and I'll publish all the details on GitHub once I'm past the prototype stage. Stay tuned.

4th Mar 2022 9:00am

JOW240725

Member Since: 04 May 2015
Location: Suffolk
Posts: 7905

2012 Defender 110 Puma 2.2 XS CSW Orkney Grey

Steve, numpty here, so could you explain exactly what you're doing here, thank you.

James
MY2012 110 2.2TDCi XS SW Orkney Grey - http://www.defender2.net/forum/topic43410.html
MY1990 110 200TDi SW beautifully faded Portofino Red - https://www.defender2.net/forum/post743641.html#743641
MY1984 90 V8 Slate Grey - https://www.defender2.net/forum/post744557.html#744557
Instagram @suffolk_rovers

4th Mar 2022 9:31am

steveww

Member Since: 05 Jan 2022
Location: Uppingham
Posts: 567

On the rev counter there is an empty space where the trip computer would be. JLR did not fit one. The instrument cluster is connected to the CAN bus which provides all sorts of metric data about the engine. Using an Arduino to read data from the CAN bus and display it on an OLED screen. A DIY trip computer.

Metrics I plan to show:

Ambient temperature with frost warning
Detailed engine temperature
Turbo boost
Average MPG
Available fuel range

I hope this makes sense.

4th Mar 2022 10:47am

Dinnu

Member Since: 24 Dec 2019
Location: Lija
Posts: 3414

Just in case you want to consider exhaust temperature and dpf soot load ☺️
I think on a 2.2 the exhaust temperature can be a bit alarming during regen... but I know that for a diesel it is the ‘life’ of the engine. Dpf soot load would interest me as I do regular short trips as no motorways locally, but from soot load would know when I need to take corrective actions either in driving habit or to consider an forced regen before it gets too late.

Looks very promising

1988 90 Hard Top, 19J Diesel Turbo, Shire Blue - Restoration ongoing
2012 90 CSW, 2.2TDCI, Santorini Black

4th Mar 2022 11:42am

JOW240725

Member Since: 04 May 2015
Location: Suffolk
Posts: 7905

Thank you, I thought that was what it was but wasn't sure

Very interested in this. I know you can mount a scanguage in this place behind the dash for similar effect. I'm sure i read somewhere that someone was close to making the Discovery display work in the Puma, but not seen much on this recently.

I'll be watching with interest. Thank you.

4th Mar 2022 11:59am

Page 2 of 8

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum