DEFENDER2.NET - View topic - Puma 2.2 fuel filter change + workshop manual

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Puma 2.2 fuel filter change + workshop manual

Page 1 of 1

Print this entire topic ·

Mickey M

Member Since: 24 Jan 2022
Location: Wellington
Posts: 5

2016 Defender 110 Puma 2.2 SW Indus Silver

Puma 2.2 fuel filter change + workshop manual

Do I need to pre-fill the new fuel filter with Diesel prior to fitting to a 2016 Defender 110SW 2.2l Puma?

Been searching forums and am getting confused - seems to be a variety of opinions. I don't want to stuff anything up.

also - is there a definitive Workshop manual for the Puma Defenders 2.2l? If so, how do I get hold of it? I have the Haynes Defender 2007-2016 workshop manual but it doesn't seem to have been fully updated for the 2.2l.

cheers from NZ....

25th Jan 2022 4:18am

piechipsandpeas

Member Since: 12 May 2021
Location: Albany, Western Australia
Posts: 208

2013 Defender 110 Puma 2.2 SW Indus Silver

For a 2.2 Puma Defender there is no need to fill new filter before installing. When swapped over turn on the ignition to position 2 (do not start the engine) and you'll hear the fuel pump in the tank start to whirr. This will pump fuel through the system and fill the new filter / purge the air out (probably about 20 seconds or so). Do this 5 or 6 times to fully purge the air out. Then you should be good to go.
The earlier 2.4 pumas didn't have the lift pump in the tank and require a different method to be followed.

25th Jan 2022 4:50am

Mickey M

Member Since: 24 Jan 2022
Location: Wellington
Posts: 5

terrific, thanks very much

2016 Puma 2.2l 110SW

25th Jan 2022 5:07am

Supacat

Member Since: 16 Oct 2012
Location: West Yorkshire
Posts: 11018

2013 Defender 110 Puma 2.2 XS DCPU Keswick Green

Re: Puma 2.2 fuel filter change + workshop manual

Mickey M wrote:
also - is there a definitive Workshop manual for the Puma Defenders 2.2l? If so, how do I get hold of it? I have the Haynes Defender 2007-2016 workshop manual but it doesn't seem to have been fully updated for the 2.2l.

Yes -

dgardel wrote:
John Baron wrote:
Hi Guys,
Does anyone know if its possible to download a workshop manual from the LR Topix site? I haven't coughed up any money to go on it yet as it's a little expensive at �250 per year so I was thinking of just buying a day but if I have to sit there and download everything in one go I will save it for a rainy day.
Just interested to know if others have had success with such a download?
Thanks,
John.

https://1drv.ms/f/s!AnHBx4Wc2MJLtxu5Hc2rPgqRNdaz

For 2.4 and 2.2 models (look at the correct MY)

25th Jan 2022 9:25am

macfrank

Member Since: 05 Nov 2015
Location: somewhere in the north
Posts: 1072

2015 Defender 110 Puma 2.2 SW Keswick Green

piechipsandpeas wrote:
For a 2.2 Puma Defender there is no need to fill new filter before installing. When swapped over turn on the ignition to position 2 (do not start the engine) and you'll hear the fuel pump in the tank start to whirr. This will pump fuel through the system and fill the new filter / purge the air out (probably about 20 seconds or so). Do this 5 or 6 times to fully purge the air out. Then you should be good to go.

Yes, worked fine for me. I was a little worried first, because I heard a gurgling noise even after 5 pump cycles. I did 5 more but it didn't change significantly. It started and ran fine though and next day the noise was gone.

25th Jan 2022 9:30pm

Mickey M

Member Since: 24 Jan 2022
Location: Wellington
Posts: 5

thanks for the info, should be a doddle! 2016 Puma 2.2l 110SW

26th Jan 2022 4:40am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum