DEFENDER2.NET - View topic - Clunking noise at low rews and when I turn off the engine

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Clunking noise at low rews and when I turn off the engine

Page 1 of 1

Print this entire topic ·

Woldberg

Member Since: 01 Sep 2010
Location: Gjøvik
Posts: 4

2011 Defender 110 Puma 2.4 XS CSW Stornoway Grey

Clunking noise at low rews and when I turn off the engine

Puma 2011

Hi
I get some strange clonking noise when I turn of the engine and when I drive on very low rews. Its sound like if you are banging two steel pipes against each other, 3-4 times as the engine moves as it shuts down. The same sound, but less noisy, when you drive on idle and the engine moves around a bit.

Been on youtube and listen to the egr-noises ant it's not that type of sound at all. It stops when the engine stops.
Sounds like something that moves and bangs against som thing... ish

Suggestions?

-Nils
Norway

20th Jun 2012 9:33am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17386

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

This is the disintegrating clutch noise familiar to earlier Pumas. Try switching off the engine with your foot on the clutch - the noise will be absent.

If it is the clutch, it is advisable to get a new one fitted sooner rather than later since if it fails completely the repair can be a lot more expensive.

What year is your Defender? Is it the original clutch?

20th Jun 2012 10:38am

Naks

Member Since: 27 Jan 2009
Location: Stellenbosch, ZA
Posts: 2638

2010 Defender 90 Puma 2.4 SW Alpine White

Have a look at this thread and the videos posted there: http://www.defender2.net/forum/topic12243.html --
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged

Defender Puma Workshop Manual: https://bit.ly/2zZ1en9
Discovery 4 Workshop Manual: https://bit.ly/2zXrtKO
Range Rover/Sport L320/L322/L494 Workshop Manual: https://bit.ly/2zc58JQ

20th Jun 2012 11:55am

Woldberg

Member Since: 01 Sep 2010
Location: Gjøvik
Posts: 4

I just thought I´ll explain what made the noice.
It was a metal clamp on one of the water hoses that banged into a steel pipe (break pipe? don´t remember now) when the engine moved under startup and shut down and on very low revs.

25th Apr 2014 3:47pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum