↓ Advertise on Defender2 ↓

Home > Search
Search found 37 matches

Author Message
 Injector replacement bolt re torque?
landhank

Post14th Nov 2023 7:41pm
Forum: Puma (Tdci) · Replies: 3 · Views: 1585 · Subject: Injector replacement bolt re torque?
There is always a discussion if there is a difference between the 2.4l engine and the 2.2l engine.
The instructions say 360 degrees for the 2.2l but some say that its wrong in the instruction.

Any ...
 Garett Turbo
landhank

Post8th Nov 2023 3:50pm
Forum: Puma (Tdci) · Replies: 6 · Views: 1275 · Subject: Garett Turbo
Could you describe the play on the turbine in more detail?
Is it axial or radial? Are there marks on the turbine or on the housing?
 Garett Turbo
landhank

Post4th Nov 2023 6:34am
Forum: Puma (Tdci) · Replies: 6 · Views: 1275 · Subject: Garett Turbo
Why was the rebuild done?
 Retrieve object from cylinder!!!
landhank

Post28th Oct 2023 5:35am
Forum: Puma (Tdci) · Replies: 35 · Views: 4895 · Subject: Retrieve object from cylinder!!!
If it's a 2.4l engine it's an easy job to remove the intake manifold. Maybe you have the chance to get it out via an open intake valve with a small magnet on a thin wire?!
 2.2 tappet noise
landhank

Post22nd Jan 2023 6:48am
Forum: Puma (Tdci) · Replies: 30 · Views: 9794 · Subject: 2.2 tappet noise
Good morning,

you could send in an oil sample to check if there are some smallest metal parts from worn in bearings…
 VCV replacement 2.2.
landhank

Post19th Jan 2023 5:09am
Forum: Puma (Tdci) · Replies: 13 · Views: 4782 · Subject: VCV replacement 2.2.
Thank you very much for the information.

Regarding your problems with the fuel pressure… i have read that the fuel pressure pump inside the fuel tank can cause problems with „vcv“ symptoms, t ...
 VCV replacement 2.2.
landhank

Post18th Jan 2023 12:12pm
Forum: Puma (Tdci) · Replies: 13 · Views: 4782 · Subject: VCV replacement 2.2.
Thank you very much for the information.

Regarding your problems with the fuel pressure… i have read that the fuel pressure pump inside the fuel tank can cause problems with „vcv“ symptoms, t ...
 VCV replacement 2.2.
landhank

Post16th Jan 2023 1:10pm
Forum: Puma (Tdci) · Replies: 13 · Views: 4782 · Subject: VCV replacement 2.2.
I also want to replace the VCV on my 2.2, but I'm afraid that the inlet manifold will have to be removed.
So far nobody has confirmed the opposite to me.
 Strange one…
landhank

Post7th Nov 2022 12:51pm
Forum: Puma (Tdci) · Replies: 8 · Views: 1757 · Subject: Strange one…
Not sure if you can check the back pressure of the injectors with an obd tool.
The pressure in the rail will be up to 1600bar i think and the pressure behind the injectors is nearly nothing… if onl ...
 Strange one…
landhank

Post7th Nov 2022 9:32am
Forum: Puma (Tdci) · Replies: 8 · Views: 1757 · Subject: Strange one…
Good morning,

maybe one injector gives too much pressure in the back drain system. You should be able to see that with a leak oil test i think?!

Cheers
landhank
 MY2011/2012 Recall Action P047/048 Front Axle Case
landhank

Post26th Oct 2022 9:48am
Forum: Puma (Tdci) · Replies: 572 · Views: 197243 · Subject: MY2011/2012 Recall Action P047/048 Front Axle Case
Obviously just a selected VIN range.
Mine is from 2012 and doesnt come up with a recall.
 2.2 tappet noise
landhank

Post7th Oct 2022 11:05am
Forum: Puma (Tdci) · Replies: 30 · Views: 9794 · Subject: 2.2 tappet noise
I would like to bring up this topic again because i havent done my VCV yet. Iam a bit afraid of that its not possible to slide out the VCV on a 2.2l engine without removing the inlet manifold?!

Has ...
 PUMA 2.2 - Metallic Squeeling Under Load
landhank

Post24th Aug 2022 5:37am
Forum: Puma (Tdci) · Replies: 20 · Views: 4395 · Subject: PUMA 2.2 - Metallic Squeeling Under Load
As far as i know the gasket between manifold and turbo is used when you put in a new turbo together with an used manifold (after checking if the manifold is not warped or something). If both parts are ...
 PUMA 2.2 - Metallic Squeeling Under Load
landhank

Post23rd Aug 2022 3:23am
Forum: Puma (Tdci) · Replies: 20 · Views: 4395 · Subject: PUMA 2.2 - Metallic Squeeling Under Load
Good morning,

the 2.2 has no gasket between manifold/turbo but has a gasket between turbo and DPF.
 Screeching coming from engine bay
landhank

Post8th Jul 2022 5:22am
Forum: Puma (Tdci) · Replies: 11 · Views: 2963 · Subject: Screeching coming from engine bay
You wrote that you put in a EGR blanking plate... That could be the reason for that noise, too. Check if the gaskets are sitting 100% correct and if everything is fine in that area.
 
All times are GMT

Jump to  
Page 1 of 3 123>



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums