DEFENDER2.NET - View topic - Cambelt Pulley System issues??

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Tdi > Cambelt Pulley System issues??

Page 2 of 2

Print this entire topic ·

Oldowner

Member Since: 26 Dec 2018
Location: South west
Posts: 623

2007 Defender 90 Puma 2.4 HT Aintree Green

The revised bracket is a straight fit, you need two longer bolts than the originals from memory, but it is a long time now since I’ve fitted one.

The cheap Tdi timing tool kits from Amazon etc are very good, although you still need crankshaft pulley holder (ebay)

A proper MHH Torqueleader or similar is required to properly tension the belt.

19th May 2022 8:49pm

Mo Murphy

Member Since: 01 Jun 2008
Location: Letchworth Garden City, Herts
Posts: 2227

1984 Defender 90 BMW M57 3.0 Diesel HT Auto Pennine Grey

A set of pushrods and possibly some rockers.
Remove the rocker shaft and the rockers from it to check for cracks or breakage in the rocker shaft itself.
HTH
Mo The Land Rover 90 - Many are called, few are chosen.

50 Shades of Pennine Grey

20th May 2022 11:22am

Jeebs

Member Since: 23 Oct 2015
Location: North West
Posts: 197

1995 Defender 90 300 Tdi HT Barolo Black

Click image to enlarge

Click image to enlarge

Way ahead of you

20th May 2022 11:42am

Mo Murphy

Member Since: 01 Jun 2008
Location: Letchworth Garden City, Herts
Posts: 2227

Indeed you are 👍
Mo The Land Rover 90 - Many are called, few are chosen.

50 Shades of Pennine Grey

20th May 2022 12:06pm

Jeebs

Member Since: 23 Oct 2015
Location: North West
Posts: 197

I plan on making some form of artwork out of the 8 bent pushrods……..

20th May 2022 12:08pm

Jeebs

Member Since: 23 Oct 2015
Location: North West
Posts: 197

Latest in my cambelt saga….

Once the timing case was open it would appear the belt had just snapped. Despite being a genuine dayco belt from Bearmach fitted less than 2yrs ago. It was perished and a bit grotty looking, no other apparent reason for failure.

However, the aux drive pulley had to have the bush burnt out to get it off and the aux belt tensioner had failed.

Am I right in thinking I need the following?

ERR2220R - Crankshaft Damper Assembly
ERR4708R - Aux belt tensioner
ERR5087 - Damper assembly bolt

I’m sticking a new water pump on for good measure whilst refreshing all the rest as seems the logical thing to do.

The good news is, fired up first turn.

15th Jun 2022 12:55pm

Jeebs

Member Since: 23 Oct 2015
Location: North West
Posts: 197

Double post in error

15th Jun 2022 12:55pm

I Like Old Skool

Member Since: 23 Feb 2015
Location: Manchester
Posts: 808

1994 Defender 110 300 Tdi ST Coniston Green

Jeebs wrote:
Am I right in thinking I need the following?

ERR2220R - Crankshaft Damper Assembly
ERR4708R - Aux belt tensioner
ERR5087 - Damper assembly bolt

.....

The good news is, fired up first turn.

How have you fired it up without a crank damper assembly and bolt fitted? That holds the bottom timing belt pulley in place.

15th Jun 2022 1:33pm

Jeebs

Member Since: 23 Oct 2015
Location: North West
Posts: 197

Old one back on, start up, turn off. Just to make sure the engine actually runs, given cambelt failed and has been stood for almost 14months.

Replacing as it’s been heated to get it out. Don’t fancy reusing it long term just incase.

15th Jun 2022 2:15pm

Page 2 of 2

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum