DEFENDER2.NET - View topic - [For Sale] Truetrac / Wheel carrier / Bilsteins / 300tdi dri

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > For Sale & Wanted > [For Sale] Truetrac / Wheel carrier / Bilsteins / 300tdi dri

Page 1 of 1

Print this entire topic ·

Oldowner

Member Since: 26 Dec 2018
Location: South west
Posts: 615

2007 Defender 90 Puma 2.4 HT Aintree Green

[For Sale] Truetrac / Wheel carrier / Bilsteins / 300tdi dri

Most of these parts were purchased for a projects that haven’t happened due to lack of time these days.

10 spline Detroit Truetrac ATB centre. Absolutely immaculate, late type stronger 6 bolt housing. Removed from a early 90 after very little use which was converted to 24 spline - I was going to fit it to a Series but never have done. Hard to find and expensive (£600) if you need one! £300

Mantec rear wheel carrier - purchase from DuckWorth Land Rover a couple of years ago. They had a promotion on these Wolf type carriers, this is the rear door (late) version, and includes a set of their spacers for mounting alloys. I’ve never even unwrapped it from the packaging it arrived in let alone fitted it. £150

Set of Bilstein B6 dampers for 98 onwards Defender. Were apparently only used a short time, I never fitted these, purchased off here 18 months ago. I have however sourced the correct Polybush bushes instead of the useless rubber ones Bilstein supply (Have another set of B6’s on my 90) £175

Safari Equip 90 saddle tank, 30litres capacity extra, brand new and never fitted. For Td5 /Puma 90. £200

Complete 300Tdi / R380 / LT230 drivetrain removed complete from an MOT failed 1997 90. I had an idea that I was going to put it all in an early ex military 90. Complete with everything needed including seatbox and floor plates etc. As removed £1000. I can palletise this and ship within UK.

Set of one piece 300tdi 90 driveshafts - perfect for Td5 / pumas fitted with the rubbish two piece shafts. Get rid of the driveshaft clonk for £30 the pair!

2nd Jan 2022 9:09pm

Mossberg

Member Since: 29 Feb 2020
Location: Lancs
Posts: 553

1993 Defender 90 300 Tdi HT Aintree Green

Could you give me more details for the Truetech please. I will take it if it is suitable for my truck.

Many thanks.

Mick

3rd Jan 2022 5:39am

Oldowner

Member Since: 26 Dec 2018
Location: South west
Posts: 615

It is ten spline for defender axles pre 1994, and Series Land Rovers.

Click image to enlarge

3rd Jan 2022 6:03pm

Blue

Member Since: 13 Aug 2019
Location: UK
Posts: 43

2007 Defender 90 Puma 2.4 SW Cairns Blue

Message sent about the Mantec wheel carrier.

Thanks

3rd Jan 2022 6:28pm

Mossberg

Member Since: 29 Feb 2020
Location: Lancs
Posts: 553

Do you have a part number? It looks like there are different ones for different axles.

3rd Jan 2022 7:02pm

Oldowner

Member Since: 26 Dec 2018
Location: South west
Posts: 615

Not off hand, as it’s at my workshop. What is your vehicle?

3rd Jan 2022 7:28pm

Mossberg

Member Since: 29 Feb 2020
Location: Lancs
Posts: 553

Unfortunately it's a bitsa! Whilst its a k reg defender, I believe the axles are from a 200tdi disco. The engine is a 300tdi with R380 and lt230.

I am happy with education on the subject!

I am only entering into the engineering side so more than happy to learn.

3rd Jan 2022 7:56pm

JOSNOS

Member Since: 06 Apr 2012
Location: Bucks
Posts: 154

PM’d you about the bilstein 2003 TD5 90

5th Jan 2022 9:08am

Mo Murphy

Member Since: 01 Jun 2008
Location: Letchworth Garden City, Herts
Posts: 2213

1984 Defender 90 BMW M57 3.0 Diesel HT Auto Pennine Grey

Is the trutrac front or rear fitment ?
Mo The Land Rover 90 - Many are called, few are chosen.

50 Shades of Pennine Grey

5th Jan 2022 11:25am

Oldowner

Member Since: 26 Dec 2018
Location: South west
Posts: 615

They are the same unit front and rear - they can be set up for front or rear use depending on requirements.

5th Jan 2022 1:12pm

Mossberg

Member Since: 29 Feb 2020
Location: Lancs
Posts: 553

Ah, I didn't know they did both. PM sent.

5th Jan 2022 1:20pm

Mo Murphy

Member Since: 01 Jun 2008
Location: Letchworth Garden City, Herts
Posts: 2213

Oddly they're sold as front or rear fitment 🥴
Mo The Land Rover 90 - Many are called, few are chosen.

50 Shades of Pennine Grey

5th Jan 2022 6:44pm

Oldowner

Member Since: 26 Dec 2018
Location: South west
Posts: 615

Mo, for the second time, the front unit is the same physical unit as the rear.

The difference between front and rear setup is the orientation of the internal worm gears. To swap from front to rear fitment you simply swap the left hand side gears for the right hand side and vice versa.

Last edited by Oldowner on 5th Jan 2022 8:03pm. Edited 1 time in total

5th Jan 2022 8:01pm

Mo Murphy

Member Since: 01 Jun 2008
Location: Letchworth Garden City, Herts
Posts: 2213

OK thanks The Land Rover 90 - Many are called, few are chosen.

50 Shades of Pennine Grey

5th Jan 2022 8:02pm

Mossberg

Member Since: 29 Feb 2020
Location: Lancs
Posts: 553

Gents, I believe this is above my skill level, so unfortunately I will have to pass on this.

Good luck with the sale and to whoever purchases.

My best regards

Mick

5th Jan 2022 8:24pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum