DEFENDER2.NET - View topic - Puma indicator cutting out ignition/dash

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical > Puma indicator cutting out ignition/dash

Page 1 of 1

Print this entire topic ·

dazzling1611

Member Since: 08 Jun 2020
Location: morpeth
Posts: 35

2011 Defender 90 Puma 2.2 HT Bronze Green

Puma indicator cutting out ignition/dash

Hi Guys ive got an electrical fault and im wondering if anyone else has had this issue.

When i put the offside indicator on, the dash goes on and off with the indicator flasher . it seems as its cutting out the ignition when flashing as everything goes off and on.

The nearside flasher and hazards are all fine.

thanks in advance

daz

13th Aug 2020 12:35pm

dazzling1611

Member Since: 08 Jun 2020
Location: morpeth
Posts: 35

someone must have had the same fault

16th Aug 2020 6:06am

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6605

2015 Defender 90 Puma 2.2 XS CSW Montalcino Red

I would start by unplugging each indicator on that side one at a time and see if it is related to one of your lamps.

Try that first and let us know

1988 90 Td5 NAS soft top

2015 D90 XS SW

16th Aug 2020 7:01am

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6605

Also does the dash go off with the indicator coming on or off with it off?

1988 90 Td5 NAS soft top

2015 D90 XS SW

16th Aug 2020 7:02am

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17383

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

Almost certainly an earth fault, check nothing has broken or come off the earth points on the bulkhead in the engine bay, especially on the offside.

16th Aug 2020 8:36am

dazzling1611

Member Since: 08 Jun 2020
Location: morpeth
Posts: 35

cheers for the replies guys , i think ive narrowed it down to a speedo/ dash fault.

i disconnected all the indicator and the fault was still there, changed the flasher relay and stalks , still there.

i pulled the clocks out and test the feed into the clocks and 12v to the clocks from the flasher relay then swapped to a different wire when changed the flasher direction stalk , so all ok with the feeds into the clocks , so must be a fault with the clocks.

now to find new clocks .

16th Aug 2020 11:42am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum