DEFENDER2.NET - View topic - Fox 2.0 resevoir shocks

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Fox 2.0 resevoir shocks

Page 6 of 9

Print this entire topic ·

keith

Member Since: 15 Aug 2012
Location: Edinburgh
Posts: 2212

Having a quick online search Iv seen many full rubber ridged covers for other shocks that would do the job with a tie clip to secure. Iv also found Velcro covers but out with the UK. I might even see if my existing plastic covers will be able to be used.

22nd Apr 2020 5:43pm

Likeomg

Member Since: 29 Jun 2012
Location: Lake District / Newcastle
Posts: 2640

2010 Defender 90 Puma 2.4 HT Stornoway Grey

Only problem is moisture build up etc, prolinx (who import fox in the uk) have some but they are for competition use only so after each event they are removed and clenaed,

this is who i got the washers from to make them hopefully fit.

22nd Apr 2020 6:05pm

keith

Member Since: 15 Aug 2012
Location: Edinburgh
Posts: 2212

Are the washers currently being used top and bottom, not able to be used again with the fox? Haven’t had a chance to look at them yet though.

Keith

22nd Apr 2020 6:24pm

Likeomg

Member Since: 29 Jun 2012
Location: Lake District / Newcastle
Posts: 2640

Mine came without any nuts or washers... not exactly impressed opening a 360 quid rear shock that didn't come with new nuts / washers... alive did say they'd send some but never got any.

saying that i've been meaning to buy these

which i will right now...

https://yrmit.co.uk/product/316-stainless-...r-classic/

while your at it don't fancy some adreneline 4x4 turrets so you can see the fox's in the wheel arch?

22nd Apr 2020 6:29pm

Likeomg

Member Since: 29 Jun 2012
Location: Lake District / Newcastle
Posts: 2640

Taxed the car and first thing I did was install the roost shields, but of engineering required due to the remote reservoir, not made easy by both my ramps being blocked with non running cars but managed to protect the shafts anyway.

Click image to enlarge

13th Jul 2020 8:50pm

Co1

Member Since: 19 Aug 2018
Location: North Yorkshire
Posts: 3674

I’m pretty sure this is a must. When I look at mine they are cacked in stone chips. I’ve managed to get one replaced on warranty which is great, but it’s an inevitable flaw in design. They should come with the shields by default.

14th Jul 2020 5:03am

MJN110

Member Since: 18 May 2015
Location: North Yorkshire
Posts: 380

2016 Defender 90 Puma 2.2 Landmark LE Montalcino Red

I have these shocks as well and now you have me concerned.
Has anybody managed to source a supplier of these shields in the UK?
Thanks 2016 Defender Landmark 90
2005 Defender CSW TD5 90XS

14th Jul 2020 7:06am

Likeomg

Member Since: 29 Jun 2012
Location: Lake District / Newcastle
Posts: 2640

Co1 wrote:
I’m pretty sure this is a must. When I look at mine they are cacked in stone chips. I’ve managed to get one replaced on warranty which is great, but it’s an inevitable flaw in design. They should come with the shields by default.

Yeah few chips in the shafts can eat away at the seals then the dampers will be leaking in no time at all...

14th Jul 2020 9:30am

Def90

Member Since: 17 Jan 2015
Location: Kent
Posts: 258

2015 Defender 90 Puma 2.2 SW Corris Grey

Prolinx sell the damper shaft guards in the UK

https://www.prolinx.biz/Catalogue/Shock-Ab...uards-pair

14th Jul 2020 11:06am

Likeomg

Member Since: 29 Jun 2012
Location: Lake District / Newcastle
Posts: 2640

Prolinx supplied me with the washers you need to fit the shaft guards, otherwise it won’t work

So make sure to ask for these when you buy the shaft guard... I’ll get a pic later

14th Jul 2020 12:04pm

MJN110

Member Since: 18 May 2015
Location: North Yorkshire
Posts: 380

I have just been onto prolinx and they say the washers that were provided were experimental only and they dont have anymore.
They are waiting on feedback to see if there is any demand for them? 2016 Defender Landmark 90
2005 Defender CSW TD5 90XS

14th Jul 2020 1:43pm

Co1

Member Since: 19 Aug 2018
Location: North Yorkshire
Posts: 3674

Nice one. Just ordered a pair.

14th Jul 2020 5:49pm

MJN110

Member Since: 18 May 2015
Location: North Yorkshire
Posts: 380

It was suggested procomp boots may do the job. 2016 Defender Landmark 90
2005 Defender CSW TD5 90XS

14th Jul 2020 8:11pm

Co1

Member Since: 19 Aug 2018
Location: North Yorkshire
Posts: 3674

Daft question, but I assume you have to remove the shocks to fit the guards? I can get a screw driver into the back of them off not??

18th Jul 2020 6:02pm

Sulisuli

Member Since: 30 Oct 2016
Location: South west
Posts: 4795

2015 Defender 90 Puma 2.2 HT Corris Grey

Interesting read, will follow with interest

2015 HT XS 90
2008 SVX 90
2000 XS TD5 90

18th Jul 2020 7:39pm

Page 6 of 9

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum