 | Home > My Defender > K90 |
 
|
|
|
| Co1 Member Since: 19 Aug 2018 Location: North Yorkshire Posts: 3671   
|
70,000 mile service today and also fitted SS door bolts and cross member bolts as the others were starting to rust. Followed it up with a bloody good clean as if was filthy! When I had the rear prop shaft off I noticed loads of slop in the rear drive members again. These were genuine LR ones and have only done 15k. I’m thinking of 1 piece drive shafts instead.
The bloody cat has taken to sleeping here. No idea why, she has a perfectly good bed and it’s not exactly safe!  Click image to enlarge |
||
14th Mar 2020 4:14pm |
|
| Co1 Member Since: 19 Aug 2018 Location: North Yorkshire Posts: 3671
|
Loire Blue is some colour in the right light.
Click image to enlarge |
||
|
14th Mar 2020 6:47pm |
|
| L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10733 
|
^^^
It sure is nice  1996 Golf Blue 300Tdi 110 Pick up.
Keeper. Clayton. |
||
|
18th Mar 2020 8:40pm |
|
| Co1 Member Since: 19 Aug 2018 Location: North Yorkshire Posts: 3671
|
New one piece half shafts fitted today. Also repaired the snapped drive member bolt. I can’t believe how worn the ones that came out were. They were genuine LR and had done about 12,000 miles and were a mess. It gets plenty of off road use, but at that rate they are essentially a wear part. Already impressed by the improvement in drive line slop.
Click image to enlarge |
||
|
20th Mar 2020 5:17pm |
|
| Co1 Member Since: 19 Aug 2018 Location: North Yorkshire Posts: 3671
|
Took the plunge and painted the NAS step in Hycote bed liner as the buzzweld was already wearing though from the dogs claws. Still not sure how I feel about it, although I do like the stainless fixings from YRM (except the outer bolts which for reason aren’t in the kit
 ) and I got hold of some SS screws for the step chequer plate as well.
Textured step next to gloss cross member: not sure it looks right but it’s function over form. Click image to enlarge Click image to enlarge |
||
|
31st Mar 2020 6:27pm |
|
| L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10733
|
It looks okay to me, nearly the same colour as the mud flaps, so all good
 1996 Golf Blue 300Tdi 110 Pick up.
Keeper. Clayton. |
||
|
31st Mar 2020 7:33pm |
|
| Co1 Member Since: 19 Aug 2018 Location: North Yorkshire Posts: 3671
|
Good point Clayton, I’ll take that!!
|
||
|
31st Mar 2020 8:12pm |
|
| L110CDL Member Since: 31 Oct 2015 Location: Devon Posts: 10733
|
 1996 Golf Blue 300Tdi 110 Pick up.
Keeper. Clayton. |
||
|
31st Mar 2020 8:38pm |
|
| Sulisuli Member Since: 30 Oct 2016 Location: South west Posts: 4795 
|
That rear step looks really smart
2015 HT XS 90
2008 SVX 90 2000 XS TD5 90 |
||
|
4th Apr 2020 7:47pm |
|
| Co1 Member Since: 19 Aug 2018 Location: North Yorkshire Posts: 3671
|
Cheers Suli, I really like it now. Got half a can left and feeling the urge to coat something else!!
|
||
|
4th Apr 2020 8:07pm |
|
| Sulisuli Member Since: 30 Oct 2016 Location: South west Posts: 4795
|
I do like it as a finish I have the chequerplate on my sidesteps done with it
2015 HT XS 90
2008 SVX 90 2000 XS TD5 90 |
||
|
4th Apr 2020 8:13pm |
|
| Co1 Member Since: 19 Aug 2018 Location: North Yorkshire Posts: 3671
|
Overhauled the fire and ice side steps. Treated the rust, gave it a bit of paint and finished the brushed steel bits with the rest of the bed liner. Quite pleased with them. Also cleaned up and painted the window blocks. They turned out rubbish so hopefully Huttopia has some left!!
Click image to enlarge Click image to enlarge Click image to enlarge |
||
|
11th Apr 2020 2:48pm |
|
| Sulisuli Member Since: 30 Oct 2016 Location: South west Posts: 4795
|
Nice work
looking very smart there. 2015 HT XS 90
2008 SVX 90 2000 XS TD5 90 |
||
|
11th Apr 2020 7:15pm |
|
| Co1 Member Since: 19 Aug 2018 Location: North Yorkshire Posts: 3671
|
Yeah, day of two halves. They look good, the window blocks look atrocious!
|
||
|
11th Apr 2020 7:22pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
