DEFENDER2.NET - View topic - Front washer jet

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Front washer jet

Page 3 of 3

Print this entire topic ·

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20325

I got mine done today.
As expected the Scrivets. (Plastic rivets) were the biggest pain.
All of them except for one all spun around, although I’m not bothered as according to the WSM they are basically a throw away part.

I managed to pry up the centre screw with a sharp small flat blade screwdriver.
Then remove that out with a trim tool. (Pictured with red handle).
Then the same procedure with the Scrivet body.
Such a pain they were and took 3x more than the job of changing the washer jet it’s self.

I cleaned the mating surface on the exterior bulkhead with the old jet off. Took the opportunity to Dinitrol though the hole and around in that area too.

A deep 13mm socket hand tightened on the extension bar only done the job. Not tightened as such.

I don’t have any issue tightening up from inside, as the jet didn’t move or slip. Probably because I cleaned and dried the misting surface.

The nozzles on mine needing adjusting anyway, and the jet spray is improved on mine.

I’m sure the Optimil is great but it should be for that price.

Click image to enlarge

Click image to enlarge ⭐️⭐️God Bless the USA 🇬🇧🇺🇸 ⭐️⭐️

17th Dec 2019 6:27pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20325

^^^^
That is with the rear Head Unit support removed. You can see the washer jet rear with the brass nut in the back there. ⭐️⭐️God Bless the USA 🇬🇧🇺🇸 ⭐️⭐️

Last edited by custom90 on 17th Dec 2019 7:47pm. Edited 1 time in total

17th Dec 2019 6:29pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17362

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

It's fiddly but easier than removing the dash! Good job done.

17th Dec 2019 7:18pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20325

👍🏻 Certainly is. That trim tool certainly helped get them out easier.

Can’t complain at 10 years plus life from the last jet. I did the rear one a year or two ago.

I might try the Optimil one day, but for now I’m happy enough.

⭐️⭐️God Bless the USA 🇬🇧🇺🇸 ⭐️⭐️

17th Dec 2019 7:36pm

Roy5695

Member Since: 15 Feb 2014
Location: Cornwall
Posts: 1123

2011 Defender 110 Puma 2.2 XS DCPU Indus Silver

If you’re going to get a billet nozzle. Get the CSI fan jet nozzle. Bloody brilliant. And with a bit of a tweak to the feed pipe, wiring and pump it’s absolutely incredible. I get a fine mist over the whole screen, wing mirror backs, roof rack 😂 2011 Defender DCPU 2.2 - https://www.defender2.net/forum/topic30623.html

Instagram - @r22oyp

Roy

18th Dec 2019 10:10pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20325

⭐️⭐️God Bless the USA 🇬🇧🇺🇸 ⭐️⭐️

18th Dec 2019 10:16pm

Page 3 of 3

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum