DEFENDER2.NET - View topic - Engine clatter at 2100 rpm

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Engine clatter at 2100 rpm

Page 1 of 1

Print this entire topic ·

Yeti110

Member Since: 04 Jan 2018
Location: Skåne
Posts: 27

Engine clatter at 2100 rpm

Hello All, I wondered if anybody has experienced and solved this issue before?

It runs nicely up until a little over 2k rpm then the tone of the engine changes and becomes more clattery and louder. Just for a second or two. Usually I back off and change gear, or I can increase the rpm a little and the engine smoothes out. My 2010-110 is fairly new to me, but this doesn't seem right.

Also, when I depress the clutch the rpm increases with the same kine of clatter. Only briefly, then the normal engine tone resumes. This only seems to happen when the engine has warmed up.

Is there an obvious place to look to solve this clatter? The car seems to have been well looked after and has only done 75k km.

Thanks for reading.

25th Apr 2018 4:42pm

andydef90

Member Since: 09 Feb 2015
Location: yorkshire
Posts: 617

2014 Defender 90 Puma 2.2 HT Corris Grey

sound like a clutch plate rattle

25th Apr 2018 6:58pm

NickMc

Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1609

I’ve also had this before and you swear it’s te clutch making te noise but the exhaust fixings has cracked on the down pipe

25th Apr 2018 7:40pm

Yeti110

Member Since: 04 Jan 2018
Location: Skåne
Posts: 27

Thanks for the replies. I really thought it was more of an engine related sound. I'll check the downpipe fittings. The clutch plate tightening is a way bigger problem. Is there a way to confirm it is the clutch plate, other than doing it?

25th Apr 2018 7:54pm

Caterham

Member Since: 06 Nov 2008
Location: Birmingham
Posts: 6292

2011 Defender 110 Puma 2.4 XS CSW Stornoway Grey

it's an old favourite

check out the bolts holding the exhaust manifold / heat shield to the head

25th Apr 2018 8:47pm

Yeti110

Member Since: 04 Jan 2018
Location: Skåne
Posts: 27

Will do. Thanks so much for your time.

25th Apr 2018 9:20pm

BenB8man

Member Since: 22 Mar 2017
Location: Norfolk
Posts: 429

2010 Defender 110 Puma 2.4 DCPU Stornoway Grey

Ahhh it's difficult because there's a few things it could be. Few other things to check are weeping injectors and rattling turbo heat shield!

25th Apr 2018 9:33pm

NickMc

Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1609

Have a quick look on google for “LUK clutch failure diagnosis” if not and it has all the tests in a PDF you can do to narrow down a clutch fault. I’m not sure if you can access their repxpert site if you’re not in the motor trade though sorry.

25th Apr 2018 9:35pm

Fernando

Member Since: 25 Oct 2017
Location: CABA
Posts: 92

2008 Defender 110 Puma 2.4 SW Bonatti Grey

If it is piston noise, it can be the vcv valve

26th Apr 2018 10:50am

Yeti110

Member Since: 04 Jan 2018
Location: Skåne
Posts: 27

Hi All,

I thought I just add this note in case anyone ever runs into this problem, albeit unlikely.

I'm ashamed to say that the cause of this problem seems to stem from my overfilling with oil, on the last oil-change. I changed the oil again last night and the rattle has all but disappeared now. I hope I haven't caused any permanent damage.

Sorry for wasting your time....

17th May 2018 2:01pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum