DEFENDER2.NET - View topic - TD5 EGR Cooler Return Pipe

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > TD5 EGR Cooler Return Pipe

Page 1 of 1

Print this entire topic ·

TechnoTurkey

Member Since: 25 Jul 2016
Location: Worcestershire
Posts: 88

2005 Defender 110 Td5 CSW Zambezi Silver

TD5 EGR Cooler Return Pipe

Hi all,

Small problem after fitting an EGR removal kit to the 110. I've managed to damage the cooler return pipe by leaving it a little close to the fan when the engine was running! Can I cut it off past the damage and then blank it off (if so with what)? Or do I need to replace it despite the EGR being removed?

Thanks in advance.

1st Jan 2017 3:31pm

Anderzander

Member Since: 08 Feb 2011
Location: Lancashire
Posts: 1000

I removed the pipe. I was going to take it off all the way around to the 'what's its name' under the exhaust manifold -but as an interim step I just took it off to the fuel cooler.

1st Jan 2017 4:12pm

bankz5152

Member Since: 02 Feb 2017
Location: South London/North Kent
Posts: 2168

Remove the whole lot, use a bolt and a jubilee clip to seal up the coolant hoses in the short while. Long term you can remove the pipe that runs round the back of the engine to the oil cooler. You'll loose just under a litre of coolant capacity but nothing to be concerned with.

2nd Feb 2017 3:24pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum