 | Home > Puma (Tdci) > Indicators Don't Flash on locking |
 
|
|
|
| Cat81 Member Since: 05 Mar 2014 Location: Kent Posts: 60   
|
Mine had that problem - was a simple fuse behind offside front speaker.
|
||
23rd May 2016 8:44pm |
|
| dgardel Member Since: 30 Nov 2008 Location: Veneto (Heart & Head) Posts: 3586 
|
read the owner manual.
not flash = remote battery low Discovery 5 td6 HSE Stornoway Gray Outback Engineering Limited Edition 
IID Pro MV License |
||
|
24th May 2016 7:46pm |
|
| yorkshireman Member Since: 28 Mar 2016 Location: North England Posts: 80 |
Hi, yes I've changed the battery in the fob. I'll see if it's a fuse.
|
||
|
24th May 2016 8:05pm |
|
| agentmulder Member Since: 16 Apr 2016 Location: Outer Space Posts: 1324 
|
After a Fob battery change you may need to resync it:
>> Push lock 4 times then unlock It'll be unresponsive until the unlock. Hopefully that's all it is. Solved the bowel problem, working on the consonants... |
||
|
24th May 2016 8:25pm |
|
| miker Member Since: 13 Sep 2015 Location: Surrey Posts: 1763 
|
My TD5 (Same alarm I believe) Only flashes 1 side, 95% of the time. Every so often, both sides flash. Both fobs are the same, and it's not a battery issue as it never flashed at all until I replaced the fob battery!
And yes, indicators and hazards work fine. |
||
|
24th May 2016 9:04pm |
|
| agentmulder Member Since: 16 Apr 2016 Location: Outer Space Posts: 1324
|
Yip, same 10AS unit in TDCi and TD5.
The battery replacement thing seems random with my vehicle, I only discovered it the last time I did a swap, about 4 replacements prior never had the issue. I also had an intermittent indicator repeater, that decided to operate with no apparent rhyme or reason, suspect it was a corroded connection... Fuse sounds likely, if it's all of them. Actually, should ask: do the indicator 'indicators' (in the dash) light up? Solved the bowel problem, working on the consonants... |
||
|
24th May 2016 9:31pm |
|
| yorkshireman Member Since: 28 Mar 2016 Location: North England Posts: 80 |
Ok turns out the fuse under the drivers seat for the alarm was missing altogether, the previous owner had dogs so probably a simple solution to disabling the sensors but not the locking. Fuse in and all is working fine, indicators flash and alarm triggers as it should. Thanks for all the suggestions.
|
||
|
4th Jun 2016 3:29pm |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
