↓ Advertise on Defender2 ↓

Home > In Car Electronics > The Puma dip/dim relay myth???????
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Shiltmeister



Member Since: 06 Dec 2014
Location: Mallorca
Posts: 32
Spain 2009 Defender 110 Puma 2.4 SW Alaska White
The Puma dip/dim relay myth???????
Hi all
I'm having issues with a new Boomslang headlight loom fitted to a 2009 Puma. No full beam of flash since installation. Replaced cheap relays on loom for better quality ones but no help.
I've heard rumours about needing to bypass the existing dip/dim relay to solve this problem. Does it exist or is it just a myth? Looked everywhere for this answer.
MOT next week so need to solve it.
Please help!! Big Cry Big Cry 2009 Puma 110 SW
Post #502265 8th Feb 2016 7:10pm
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 17450
United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
Yes it does, in the relay/fuse housing under the column. The easiest way to disable the dimdip is to unplug the connector for the series resistor, located under the offside wing top near the aerial. All you need do is unplug the connector.
Post #502294 8th Feb 2016 7:36pm
View user's profile Send private message View poster's gallery Reply with quote
Shiltmeister



Member Since: 06 Dec 2014
Location: Mallorca
Posts: 32
Spain 2009 Defender 110 Puma 2.4 SW Alaska White
Thanks for the reply. On my LHD Puma this relay doesn't exist under the steering column. The big pink one is the wiper relay.I've hunted all possible alternatives.

Click image to enlarge

Is the resistor easy to locate? I hunted all around both wings and around where the arial is. This is starting to get annoying 2009 Puma 110 SW
Post #502333 8th Feb 2016 8:23pm
View user's profile Send private message View poster's gallery Reply with quote
blackwolf



Member Since: 03 Nov 2009
Location: South West England
Posts: 17450
United Kingdom 2007 Defender 110 Puma 2.4 DCPU Stornoway Grey
Aha, left hooker, missed that! Pretty sure you won't have dim dip, since it was conceived by idiot British bureaucrats and inflicted only on us.

You presumably know if you had it before you changed the loom and lights.
Post #502370 8th Feb 2016 9:29pm
View user's profile Send private message View poster's gallery Reply with quote
Alien



Member Since: 18 Jan 2015
Location: Bacchus Marsh
Posts: 230
Australia 
Re: The Puma dip/dim relay myth???????
Shiltmeister wrote:
Hi all
I'm having issues with a new Boomslang headlight loom fitted to a 2009 Puma. No full beam of flash since installation. Replaced cheap relays on loom for better quality ones but no help.
I've heard rumours about needing to bypass the existing dip/dim relay to solve this problem. Does it exist or is it just a myth? Looked everywhere for this answer.
MOT next week so need to solve it.
Please help!! Big Cry Big Cry

If it's only happened since fitting the harness that's where I'd be looking.
Check for an earth wire not being connect that is for the full beam relay.
Also check if there is a separate power supply of the same relay, maybe it's not connected or has a blown/missing fuse.


A later thought...
Is the blue light on the instrument panel lighting up?
This should be working if the headlamp switch is good. Cheers,
Kyle.
Post #502536 9th Feb 2016 9:34am
View user's profile Send private message View poster's gallery Reply with quote
theorangebandit



Member Since: 03 Jun 2013
Location: Stowmarket
Posts: 862
This may seem like a stupid question but ... Have you checked the high beam fuses ? These are easily blown when fitting things to the headlights if the ignition is left on. They are each fused individually left and right
Post #502593 9th Feb 2016 11:57am
View user's profile Send private message View poster's gallery Reply with quote
Shiltmeister



Member Since: 06 Dec 2014
Location: Mallorca
Posts: 32
Spain 2009 Defender 110 Puma 2.4 SW Alaska White
Re: The Puma dip/dim relay myth???????
Alien wrote:
Shiltmeister wrote:
Hi all
I'm having issues with a new Boomslang headlight loom fitted to a 2009 Puma. No full beam of flash since installation. Replaced cheap relays on loom for better quality ones but no help.
I've heard rumours about needing to bypass the existing dip/dim relay to solve this problem. Does it exist or is it just a myth? Looked everywhere for this answer.
MOT next week so need to solve it.
Please help!! Big Cry Big Cry

If it's only happened since fitting the harness that's where I'd be looking.
Check for an earth wire not being connect that is for the full beam relay.
Also check if there is a separate power supply of the same relay, maybe it's not connected or has a blown/missing fuse.


A later thought...
Is the blue light on the instrument panel lighting up?
This should be working if the headlamp switch is good.


Yeah the full beam blue light glows on the dash and the indicator stalk switch gear is new. Hence why I'm fitting the new loom as I kept melting them.
I will check the relays again in the loom to be sure.
Thanks 2009 Puma 110 SW
Post #502719 9th Feb 2016 4:33pm
View user's profile Send private message View poster's gallery Reply with quote
Shiltmeister



Member Since: 06 Dec 2014
Location: Mallorca
Posts: 32
Spain 2009 Defender 110 Puma 2.4 SW Alaska White
theorangebandit wrote:
This may seem like a stupid question but ... Have you checked the high beam fuses ? These are easily blown when fitting things to the headlights if the ignition is left on. They are each fused individually left and right


Thanks but yes it was first think I checked. I will not let this defeat me! 2009 Puma 110 SW
Post #502720 9th Feb 2016 4:35pm
View user's profile Send private message View poster's gallery Reply with quote
Shiltmeister



Member Since: 06 Dec 2014
Location: Mallorca
Posts: 32
Spain 2009 Defender 110 Puma 2.4 SW Alaska White
FIXED!!!
Thank the lord. Rechecked all the connections in the relay holders and after a bit of tugging of everything the +ve crossover between the two relays slid out with a broken crimp on the end.
Thanks for your inputs. 2009 Puma 110 SW
Post #502760 9th Feb 2016 5:56pm
View user's profile Send private message View poster's gallery Reply with quote
Alien



Member Since: 18 Jan 2015
Location: Bacchus Marsh
Posts: 230
Australia 
Good to see it's sorted Thumbs Up Cheers,
Kyle.
Post #503012 10th Feb 2016 9:20am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums