DEFENDER2.NET - View topic - Judder on take off and reverse

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Judder on take off and reverse

Page 1 of 2

Print this entire topic ·

Paintedpilgrim

Member Since: 28 Nov 2015
Location: Hereford
Posts: 49

1998 Defender 110 300 Tdi CSW Epsom Green

Judder on take off and reverse

Hi, I've got a 2002 110 ex untility defender, There is really excessive judder on take off and when reversing when releasing the clutch and everything is taking up drive. I'm no mechanic but it feels like the props juddering. I've owned lots of discovery but this is my first defender, I know they are not silky smooth rides but this is a lot worse than any of the discos I've had. I was wondering maybe being utility and spending a lot of its life off road if certain parts were worn out maybe, where's the best place to start looking as its bugging me now! Cheers

14th Dec 2015 6:55pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20347

Worn prop UJ's? When was the clutch last changed?

14th Dec 2015 6:59pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17372

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

DMF and/or clutch, a very common occurrence.

14th Dec 2015 7:01pm

Paintedpilgrim

Member Since: 28 Nov 2015
Location: Hereford
Posts: 49

Not sure on the clutch, feels fine other that this, how would I check the uj for wear? What is the dmf please?

14th Dec 2015 7:04pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20347

DMF = Dual Mass Flywheel.

No DMF on mine as it's a Puma, however I had similar problems and it was the clutch.
They told me the clutch was worn but not really badly but the friction plate was pitted.
That might explain the juddering which I had too.

14th Dec 2015 7:30pm

Paintedpilgrim

Member Since: 28 Nov 2015
Location: Hereford
Posts: 49

Ah I see, sounds expensive to me! How could I tell if it is the clutch or dmf?

14th Dec 2015 7:56pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20347

That's the problem, you can't unless it's apart.
And yes, it is expensive!

It got worse for me until one day it suddenly and unexpectedly got so bad it was slipping all the time in every gear. You'd change, bring up the clutch and no drive until about 2 secs later. I just got home and then needed recovery to dealer.
Other members here are more experienced on the mechanics and spannering side than me.

It can't be prop balancing as that'd be during drive not moving off.

UJ's would need to be checked for rotational play in them, I'm not sure how much play they should have as standard.
They do have tolerances of a certain amount of play in them from new.

14th Dec 2015 8:23pm

rallysteve

Member Since: 10 Feb 2014
Location: Cumbria
Posts: 2227

2002 Defender 110 Td5 DCPU Keswick Green

Is it better after everything has warmed up a bit after a few miles?

When does it do it, as soon as the clutch starts to bit or just before you have finished raising the pedal?

Steve 02' 110 TD5 Double Cab Rebuild Thread

14th Dec 2015 9:42pm

Paintedpilgrim

Member Since: 28 Nov 2015
Location: Hereford
Posts: 49

Yeah it is a bit better once warmed up and it does it just as the clutch bites

14th Dec 2015 9:46pm

Paintedpilgrim

Member Since: 28 Nov 2015
Location: Hereford
Posts: 49

It doesn't matter how gently you disengage the clutch it happens, but it's fine once your going along although you do have to lift the clutch slowly after a gear change

14th Dec 2015 9:48pm

Toby60

Member Since: 06 Dec 2014
Location: Cheshire
Posts: 28

I have a 2002 TD5 90 that has some clutch judder when the vehicle is first used and once warmed up it goes away. It occurs from when the clutch bites to the fully released position. The vehicle has done 123,000 miles and is on its original clutch. I put it down to either dampness or a small amount of oil on the clutch plate. Although due to the mileage, the clutch could be on its way out but it does not slip at any time.

Is the judder something I should be concerned about? ------------------------------------------------
2002 TD5 90 HT County

14th Dec 2015 10:21pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20347

Jeez, 123k on original clutch. Puma one's must be made of cheese!
Mine was changed at 44k.

14th Dec 2015 11:41pm

Paintedpilgrim

Member Since: 28 Nov 2015
Location: Hereford
Posts: 49

Mines done 143k but I didn't get any history with it so have no idea if the clutch has been done

15th Dec 2015 7:38am

landy andy

Member Since: 15 Feb 2009
Location: Ware, Herts
Posts: 5695

2006 Defender 110 Td5 USW Zermatt Silver

Take props off and throughly check all the UJ's and slides, but it does sound more like the DMF to me.
Sorry

Andy

15th Dec 2015 9:46am

Stacey007

Member Since: 25 Sep 2015
Location: Cheshire
Posts: 3749

How much is a clutch on a puma?

15th Dec 2015 11:29am

Page 1 of 2

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum