↓ Advertise on Defender2 ↓

Home > My Defender > 300tdi 110 Project.
Post Reply  Down to end
Page 1 of 6 123456>
Print this entire topic · 
Nidge



Member Since: 27 Jan 2008
Location: Kildare Ireland
Posts: 817
Ireland 2009 Defender 110 Puma 2.4 HCPU Cairns Blue
300tdi 110 Project.
Against my better judgement, I found myself buying an X utility 110 last week, been sitting for 10yrs and has had some work done but alot more to do.
Its only when you get it home and start to strip it you realize.....have I bitten off more than I can chew this time...as I will be doing the bulk of the work myself

Couple of Holes in the Bulkhead , chassis needs welding and a new rear cross member, no hand brake unit , leaking radiator loads of missing parts etc. etc.
On a positive Engine sounds sweet but a tad smokey.

My plan is to swap out the bulkhead repair the chassis, convert to a pick up, with canvas canopy and respray it in its original colour...Portofino Red....and a nice set of white wolf rims

But am open to other suggestions Rolling with laughter

Nidge.

Day of arrival.


Click image to enlarge

Doors and windscreen in to keep the weather out ....Let the work commence !!

Click image to enlarge
Post #444418 9th Aug 2015 9:31am
View user's profile Send private message View poster's gallery Reply with quote
g-mack



Member Since: 07 Jan 2014
Location: northumberland
Posts: 1967
United Kingdom 
Ooh looking forward to this thread Thumbs Up My 109 thread

my youtube channel
Post #444435 9th Aug 2015 10:40am
View user's profile Send private message View poster's gallery Reply with quote
CR



Member Since: 28 Jan 2010
Location: Ireland
Posts: 947
Ireland 2011 Defender 110 Puma 2.4 CSW Santorini Black
How about full soft top, series doors, repaint it AA yellow



Click image to enlarge
Post #444458 9th Aug 2015 11:57am
View user's profile Send private message View poster's gallery Reply with quote
Nidge



Member Since: 27 Jan 2008
Location: Kildare Ireland
Posts: 817
Ireland 2009 Defender 110 Puma 2.4 HCPU Cairns Blue
I did consider the soft top but lack of security for the dogs put me off it .....and also would look too American Whistle

N
Post #445297 11th Aug 2015 9:48pm
View user's profile Send private message View poster's gallery Reply with quote
Nidge



Member Since: 27 Jan 2008
Location: Kildare Ireland
Posts: 817
Ireland 2009 Defender 110 Puma 2.4 HCPU Cairns Blue
Explored the bulkhead further this evening .....can't decide if I should repair or bit the bullet and replace with a galvanized one Question

Pictures below show the worst of the rot. Sad




Click image to enlarge



Click image to enlarge



Click image to enlarge
Post #445309 11th Aug 2015 10:01pm
View user's profile Send private message View poster's gallery Reply with quote
Timo



Member Since: 14 Jul 2011
Location: Peterborough Ontario
Posts: 171
Canada 1984 Defender 110 300 Tdi SW Alveston Red
This will be good to see come to life. What on earth is tha black tar on thw vents?

Tim Series II in pieces
1984 Defender 110 (3.5l V8 now 300TDI)
Post #445337 12th Aug 2015 1:42am
View user's profile Send private message View poster's gallery Reply with quote
Nidge



Member Since: 27 Jan 2008
Location: Kildare Ireland
Posts: 817
Ireland 2009 Defender 110 Puma 2.4 HCPU Cairns Blue
Tim looks to me like someone covered the flaps over with a roll bitumen roofing felt , to try and keep the weather out Rolling Eyes

Will be a pig to remove...another reason maybe to replace the bulkhead.

N.
Post #445350 12th Aug 2015 6:38am
View user's profile Send private message View poster's gallery Reply with quote
Browny90



Member Since: 20 Jul 2015
Location: Derbyshire
Posts: 183
United Kingdom 2004 Defender 90 200 Tdi SW Stornoway Grey
I've seen Bulkheads in a lot worse condition.. really depends on your welding/ Fabricating skills I suppose.. A new bulkhead can be pricey and time consuming..

I opted for a TD5 one I found complete with ancills, dash etc for £500, only had to do a few of the MODs like the G/box tunnel to fit my LT77 because I'm using the TD5 wiper motor, and complete dash so it was a doddle to fit.. My 1986 90 is currently on a full rebuild, with new chassis, Paint etc.. Very much a hybrid, TD5 Chassis, tub & bulkhead with a 200TDI and LT77 GB Painted in Stornoway Grey Smile 2 years off the road, but getting close to completion now
Post #445380 12th Aug 2015 8:05am
View user's profile Send private message View poster's gallery Reply with quote
RRUK
Site Supporter


Member Since: 31 Mar 2010
Location: Leicestershire
Posts: 2025
United Kingdom 
Nidge wrote:
Tim looks to me like someone covered the flaps over with a roll bitumen roofing felt , to try and keep the weather out Rolling Eyes

Will be a pig to remove...another reason maybe to replace the bulkhead.

N.


The things some people with no skill or knowledge do to their cars beggars belief at times! 2016 D4 HSE

1998 110 TUM HS FFR Hard Top XD WOLF

1982 Series 3 SWB Petrol
Post #445382 12th Aug 2015 8:11am
View user's profile Send private message View poster's gallery Reply with quote
familymad



Member Since: 13 Dec 2011
Location: Bucks
Posts: 3481
 2016 Defender 130 Puma 2.2 HCPU Santorini Black
Replace it and get it galvanised. More projects come to a grinding halt as people try something that doesn't work and then lose the will.

Will be great once done Thumbs Up 1951 80" S1 2.0
1995 110 300TDI
1995 90 300TDI
Post #445386 12th Aug 2015 8:42am
View user's profile Send private message View poster's gallery Reply with quote
NickMc



Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1624
Northern Ireland 2006 Defender 90 Td5 HT Bonatti Grey
Glutton for punishment! Just started into something much the same myself all be it only 4 years old though with a lot less rust Razz might have puma bulkhead with a little damage for sale.
Post #445868 13th Aug 2015 6:40pm
View user's profile Send private message View poster's gallery Reply with quote
Nidge



Member Since: 27 Jan 2008
Location: Kildare Ireland
Posts: 817
Ireland 2009 Defender 110 Puma 2.4 HCPU Cairns Blue
Didn't get much done this weekend , installed the correct transmission brake and removed the Pto driven hydraulic pump for the winch. Did the flange seal on the transfer box too seen as the flange had to come off to mount the new back plate

Oh and found more holes in the chassis Banging Head Banging Head ....looks more and more like a new galvanized chassis is needed

Before I know it......it will have turned into a complete re - build Shocked

N.



Click image to enlarge




Click image to enlarge
Post #446484 16th Aug 2015 12:43pm
View user's profile Send private message View poster's gallery Reply with quote
NickMc



Member Since: 01 Oct 2014
Location: Norn Iron
Posts: 1624
Northern Ireland 2006 Defender 90 Td5 HT Bonatti Grey
Oh dear Neutral the 300's seem to be the worst for rot. Im ordering a few marsland chassis if you're interested give me a shout sir Thumbs Up
Post #446513 16th Aug 2015 2:51pm
View user's profile Send private message View poster's gallery Reply with quote
Nidge



Member Since: 27 Jan 2008
Location: Kildare Ireland
Posts: 817
Ireland 2009 Defender 110 Puma 2.4 HCPU Cairns Blue
Ok time for a bit of an update , been tipping away at this as time and funds allow..

Gave the engine a full oil service and fitted new decat Exhaust, while I was at I removed the EGR valve and fitted some nice MK performance Hoses.


Click image to enlarge




New Nissans radiator installed and topped up with new coolant


Click image to enlarge


New Front shox, springs and Galvanised turrets.



Click image to enlarge
Post #454017 10th Sep 2015 8:13pm
View user's profile Send private message View poster's gallery Reply with quote
Nidge



Member Since: 27 Jan 2008
Location: Kildare Ireland
Posts: 817
Ireland 2009 Defender 110 Puma 2.4 HCPU Cairns Blue
The replacement bulkhead arrived.... Td5 one off a 06 utility 110, hopefully not too different to the 300tdi one....all in all its in fairly good nick, except for some rust along the top of the footwells....Land rover in their wisdom figured there was no need to brush some seam sealer on this joint ... Rolling Eyes Rolling Eyes



Click image to enlarge



Started into removing the dash parts floor plates etc.



Click image to enlarge


Thats all for now

Nidge.
Post #454021 10th Sep 2015 8:22pm
View user's profile Send private message View poster's gallery Reply with quote
Post Reply  Back to top
Page 1 of 6 123456>
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
DEFENDER2.NET RSS Feed - All Forums