DEFENDER2.NET - View topic - Electircal (wiring) questions

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Electircal (wiring) questions

Page 1 of 1

Print this entire topic ·

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17538

2007 Defender 110 Puma 2.4 DCPU Stornoway Grey

Electircal (wiring) questions

Can any provide some advice re the wiring in the rear light area on a 2007 Puma (County DC version)?

Behind the plastic panel in the load area on the NS there are two non-connected thin wires. Behind the plastic panel on the OS there is a similar pair of non-connected thin wires. I assume that these are for the speakers that would be present on a SW?

On the OS, there is also a large connector block with 5 (I think) connectors in it, plus a further pair of quite thick wires in a two pole connector. Both connector blocks are not connected. What are these for? Is there a chance that the latter is a live feed that could be used for something useful?

In the OSR wheel-arch just above the rear crossmember there is also a large non-connected connector block. I seem to recall reading in this forum that this is where the fuel-burning hearter option is installed if fitted, is this what this connector is for?

Finally, does anyone have a copy of the electrical manual for a 2007 Puma? With help from the wonderful contributors to this forum I have a WSM, but an electrical manual woudl be handy.

Thanks.

20th Jul 2010 9:23am

nicks

Member Since: 21 Aug 2008
Location: south coast
Posts: 469

2013 Defender 110 Puma 2.2 XS CSW Alaska White

hi

i belive the bigger connector block is for the two electrics and the twin for Aux power socket, well thats what i have connected to mine. The thinner wires are for speakers.

there is a link in a post on here somewhere about downloading the wiring diagrams

20th Jul 2010 12:16pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17538

nicks wrote:
hi

i belive the bigger connector block is for the two electrics and the twin for Aux power socket, well thats what i have connected to mine. The thinner wires are for speakers.

there is a link in a post on here somewhere about downloading the wiring diagrams

Thanks. I am puzzled then why I have a (I believe dealer-fitted) towing socket but nothing connected to the bigger connector! The Aux power socket will be useful; must fit one.

20th Jul 2010 12:26pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17538

It occurs to me that the large unused connector that is inside the vehicle (behind the plastic panel by the rear lights on the o/s) could be the connector for the rear window wiper, which of course is not fitted to my DC.

Can anyone confirm this? Thanks.

26th Jul 2010 9:58am

mse

Member Since: 06 Apr 2008
Location: UK
Posts: 5053

2016 Defender 110 Puma 2.2 XS CSW Scotia Grey

Post a picture and ill look through the right manual Mike

26th Jul 2010 12:24pm

Martin
Site Admin

Member Since: 02 Apr 2007
Location: Hook Norton
Posts: 6633

2015 Defender 90 Puma 2.2 XS CSW Montalcino Red

Or let me know the wire colours and I'll see what I can find

1988 90 Td5 NAS soft top

2015 D90 XS SW

26th Jul 2010 12:33pm

Merlin

Member Since: 30 Oct 2010
Location: Newmarket
Posts: 981

Hi Blackwolf,

Where did you get a WSM?

5th Nov 2010 5:49pm

K9F

Member Since: 12 Nov 2009
Location: Bournemouth
Posts: 9610

2008 Defender 90 Puma 2.4 XS CSW Stornoway Grey

Blacwolf,

Dgardel one of our other members posted a link to his downloads some time ago, there is a complete set of wiring diagrams therein. Follow the link:

http://www.defender2.net/forum/topic2239.h...+downloads

Alternatively if you're in my neck o' the woods you can swing by and have a look at my diagrams!

[/quote] If you go through life with your head in the sand....all people will see is an ar5e!!

Treat every day as if it is your last....one day you will be right!!

5th Nov 2010 6:44pm

blackwolf

Member Since: 03 Nov 2009
Location: South West England
Posts: 17538

Thanks guys, I did get a set of diagrams plus the WSM through the generosity of forum members, and I am now sorted.

My confusion stemmed from the fact that someone had (very badly) spliced a non-fenuine trailer socket harness into the tail end harness, so that the proper trailer connector was not used. Again , through the co-operation of forum members I now have the correct socket wired correctly.

5th Nov 2010 6:48pm

Allan

Member Since: 09 Sep 2009
Location: Perth
Posts: 166

2008 Defender 110 Puma 2.4 SVX Station Wagon Santorini Black

Re: Electircal (wiring) questions

blackwolf wrote:
Can any provide some advice re the wiring in the rear light area on a 2007 Puma (County DC version)?

Behind the plastic panel in the load area on the NS there are two non-connected thin wires. Behind the plastic panel on the OS there is a similar pair of non-connected thin wires. I assume that these are for the speakers that would be present on a SW?

On the OS, there is also a large connector block with 5 (I think) connectors in it, plus a further pair of quite thick wires in a two pole connector. Both connector blocks are not connected. What are these for? Is there a chance that the latter is a live feed that could be used for something useful?

In the OSR wheel-arch just above the rear crossmember there is also a large non-connected connector block. I seem to recall reading in this forum that this is where the fuel-burning hearter option is installed if fitted, is this what this connector is for?

Finally, does anyone have a copy of the electrical manual for a 2007 Puma? With help from the wonderful contributors to this forum I have a WSM, but an electrical manual woudl be handy.

Thanks.

PM sent.

Allan

6th Nov 2010 10:47pm

SteveS

Member Since: 05 Oct 2010
Location: Devon & Berkshire
Posts: 388

2009 Defender 110 Puma 2.4 USW Santorini Black

I've been trying to get hold of the wiring diagrams on another thread today (and the above link was recommended but I've not had much success with the downloads) - could somebody send me a link to an unzipped .pdf??

Much appreciated

7th Nov 2010 12:25am

Allan

Member Since: 09 Sep 2009
Location: Perth
Posts: 166

PM me with email details and I will send the file.

Allan

7th Nov 2010 7:04am

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum