DEFENDER2.NET - View topic - TD5 Turbo oil return pipe gasget

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Td5 > TD5 Turbo oil return pipe gasget

Page 1 of 1

Print this entire topic ·

tazmarkuk

Member Since: 24 Jan 2012
Location: Birmingham
Posts: 134

TD5 Turbo oil return pipe gasget

Hi guys, after some advice on the gasket for the oil return pipe from the turbo, I fitted a new gasket yesterday as the other was leaking, fitted and went on a run for about 50 miles yesterday had no leaks, today on the way home from work the gasket has started leaking again. My question is, is there a difference in quality, not sure what make the gasket was as they had them on display in the shop.

20th Jul 2015 6:28pm

taazzukcb

Member Since: 30 Aug 2013
Location: Derbyshire
Posts: 663

2004 Defender 110 Td5 DCPU Stornoway Grey

Which type did you get? You can get Paper, Reinforced Paper and a metal one.

20th Jul 2015 9:15pm

tazmarkuk

Member Since: 24 Jan 2012
Location: Birmingham
Posts: 134

Hi Taazzukcb the metal one

20th Jul 2015 9:19pm

taazzukcb

Member Since: 30 Aug 2013
Location: Derbyshire
Posts: 663

Hmm ... the metal one should do the job. I tried the paper and fibre jobs, all of which weeped a little. Put the metal one on, and whilst it weeped slightly to start with, after a few heat cycles, I nipped them up again and not had a drop since!

21st Jul 2015 8:21pm

munch90

Member Since: 26 Oct 2013
Location: guildford
Posts: 3558

If possible check the return pipe is clear as sometimes you can get a build up of carbon in the pipe causing a bit of back pressure and leaking

also is the flange on the pipe flat

21st Jul 2015 8:34pm

tazmarkuk

Member Since: 24 Jan 2012
Location: Birmingham
Posts: 134

Hi taazzukcb yeah I tried to see if it would tighten up some more but no, asked around to day about another metal gasket, I payed 58p another dealer wanted £2.50, so I'm starting to wonder if their is a quality difference, both faces are clean.

21st Jul 2015 8:42pm

munch90

Member Since: 26 Oct 2013
Location: guildford
Posts: 3558

Clean , but are they flat , for metal gaskets they need to be 100% flat

21st Jul 2015 8:46pm

tazmarkuk

Member Since: 24 Jan 2012
Location: Birmingham
Posts: 134

Update: I had issues of the oil return pipe not sealing with the turbo, well, it was nothing to with the gaskets or whether the surfaces were flat, it was the turbo. The turbo bearing was starting to collapse, thus pressurising the the oil system causing the leak. Turbo rebuilt, and after 200 miles now all is good.

27th Oct 2015 3:11pm

Welkman

Member Since: 02 Nov 2014
Location: Essex colchester
Posts: 326

thanks for posting this, I have a suspicion this could be happening on my defender as well. Is there any checks that are easily done to test for it pressurising?

27th Oct 2015 3:57pm

tazmarkuk

Member Since: 24 Jan 2012
Location: Birmingham
Posts: 134

I don't know of any tests but someone may come along with an idea, the way I found out was a slight colour change in the aluiminium housing by the vanes which had become mat looking, the end float was still very minimal. Had the turbo checked by a specialist this confirmed my suspicions. You could check to see if any pressure is coming up through the dipstick tube. I had a little which has now gone.

27th Oct 2015 4:12pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum