 | Home > Puma (Tdci) > Rear door |
 
|
|
|
if I loosen the bolts is there plenty of movement to adjust the door and close the gap as it is quite a considerable opening, the seal is good and no nicks or cuts, the door is just touching it when closed and not compressing the joint, thanks in advance.
| K9F Member Since: 12 Nov 2009 Location: Bournemouth Posts: 9610   
|
Safari Door???? There is a little adjustment. Take the spare off first. The bolts are not captive so you will have to remove any trim and slacken them off. It'll be a two person job. The lowest nuts are accessible through the rear arch.
 If you go through life with your head in the sand....all people will see is an ar5e!!
Treat every day as if it is your last....one day you will be right!! |
||
5th Apr 2015 8:33am |
|
| andydef90 Member Since: 09 Feb 2015 Location: yorkshire Posts: 617 
|
I had same with mine I adjusted the catch plate and that cured it
|
||
|
5th Apr 2015 8:38am |
|
| Paul55 Member Since: 03 Feb 2009 Location: Somewhere in my head! Posts: 511  
|
Thanks for the prompt reply K9, I thought that would be the case, I shall give it a go this morning
Cogito ergo sum |
||
|
5th Apr 2015 8:38am |
|
| Paul55 Member Since: 03 Feb 2009 Location: Somewhere in my head! Posts: 511
|
I'll give the catch plate a tighten as well, forgot about that
Cogito ergo sum |
||
|
5th Apr 2015 8:40am |
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
