DEFENDER2.NET - View topic - Snapped Dipstick

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Modifications > Snapped Dipstick

Page 1 of 1

Print this entire topic ·

GSD

Member Since: 18 Dec 2012
Location: UK
Posts: 38

Snapped Dipstick

Good morning everyone, hope yours is going better than mine....

I planned to check oil and lub's, tires etc this morning but as I went to check the oil i felf some resistance on the dipstick. I was pulling at a slight angle with a rag around the dipstick when I felt it snap. I'm 80% sure I heard some metal fall outside the dipstick tube/ engine. Ive spent an hour trying to find it but to no avail. The part that has snapped is the flat metal part at the bottom of the wire, the part with the measurements on.

Ive opted not to start the engine until i found the missing part, but i cant find it. Possibly, if i started it the missing part would drop out of somewhere. What really worries me is if the end has gone back down the tube and into the sump.
1, is it likely to damage the engine if i drove it?
2, is it likely to fall out if I drain the oil? I have no magnet.

Any advice would be appreciated........
Thanks

27th Apr 2014 11:15am

steve E

Member Since: 06 Mar 2011
Location: Tenby
Posts: 2073

Hi there
have you tried a search as i'm sure this came up a while ago

im not good at this computer lark or id find and post it for you

steve e

27th Apr 2014 11:19am

steve E

Member Since: 06 Mar 2011
Location: Tenby
Posts: 2073

search under broken dipstick

27th Apr 2014 11:20am

GSD

Member Since: 18 Dec 2012
Location: UK
Posts: 38

Cheers Steve. I tried a 'Google' but nothing came up for this site, Ill try a search.

Cheers

27th Apr 2014 11:21am

GSD

Member Since: 18 Dec 2012
Location: UK
Posts: 38

Yep, found the 2 threads Steve, will go and drain the oil now.

Thanks

27th Apr 2014 11:25am

TR51

Member Since: 17 Apr 2012
Location: Dorset UK
Posts: 333

2014 Defender 110 Puma 2.2 SW Corris Grey

http://www.defender2.net/forum/topic23478....n+dipstick

http://www.defender2.net/forum/topic20217....n+dipstick

27th Apr 2014 11:26am

GSD

Member Since: 18 Dec 2012
Location: UK
Posts: 38

Well, i've drained the oil in the hope it would be stuck to the magnetic sump plug. My sump plug, is definitely NOT magnetic, and there was nothing in the oil.

Looked all over the engine bay but no sign of the tip. Sadly ive not the tools to take the sump off, thoroughly

ed off .

27th Apr 2014 3:14pm

K9F

Member Since: 12 Nov 2009
Location: Bournemouth
Posts: 9610

2008 Defender 90 Puma 2.4 XS CSW Stornoway Grey

Did you run something down the tube to ensure it wasn't stuck in there? Chances are it'll be stuck in the sump and the oil flow wasn't strong enough to shift it.

Three choices really.....

Invest or borrow the tooling to do the job below....

Phone a friend....

Or.....

Arrange for a dealer/independant to collect and get them to sort it.

The latter of course will cost you significantly more than the tools to do it.

UK is a big place. Post whereabouts you are and a fellow forum member may offer to assist?

Glynparry25 wrote:
I have heard of this a few times now- , make sure it is in the sump (poke it through with something long and thin) and then drain the oil and it will come out - if not you will then have to remove the sump (easy).

Then re-attach it properly (not like LR).

Glyn

If you go through life with your head in the sand....all people will see is an ar5e!!

Treat every day as if it is your last....one day you will be right!!

27th Apr 2014 3:55pm

GSD

Member Since: 18 Dec 2012
Location: UK
Posts: 38

Thanks K9F.
Im in the Catterick area, it was more I dont have any sealant to refit the sump. A truck mechanic over the road said 'not to worry, see's it on trucks alot'. If it was a work vehicle I wouldn't be too worried, but its my pride and joy and my cash. If I had a second car or I was in a city I could take the sump off slow time, but its our daily drive.

I was surprised the sump plug isn't magnetic though. Think I'll replace that.

27th Apr 2014 8:28pm

munch90

Member Since: 26 Oct 2013
Location: guildford
Posts: 3558

if your bit of broken dipstick is still in the sump

Don't know what your engine is but maybe worth a try

One way to remove is find a strong magnet and stick it to bottom of sump then slide magnet towards sump plug hole and if your lucky it would drag the part close to the hole then with a bit of mucking about you may get the bit out

could also work if its a ally sump ,but you will have to hold it up to the sump

28th Apr 2014 1:33pm

GSD

Member Since: 18 Dec 2012
Location: UK
Posts: 38

Thanks Munch90, just ordered a strong magnet and will give it a bash.
K9F, i can put the remainder of the dipstick down with no resistance, so if it did stay in it went down the tube to the sump. Had a drive today and will drain the oil again, see if it turns up.

28th Apr 2014 1:42pm

custom90

Member Since: 21 Jan 2010
Location: South West, England.
Posts: 20355

You could always also get a magnetised old screwdriver. Or magnetise one, bend it almost to 90degrees and use that to fish about through the drain plug.

28th Apr 2014 2:12pm

GSD

Member Since: 18 Dec 2012
Location: UK
Posts: 38

Hi Steve,
Just been doing that tonight, i also pushed a metal rod down the tube to push it into the sump. To be safe, the sump is coming off and I'll do a complete oil/filter change while I'm there.

I've still got the feeling the bloody thing is hiding in the engine bay, or fell out on the road. Called round a few garages before I drove to ask if it was a danger to the engine, all seemed to say it 'shouldn't' do any damage.

Excuse to buy more tools and get under the wagon though. Next investment is some ramps

28th Apr 2014 9:35pm

GSD

Member Since: 18 Dec 2012
Location: UK
Posts: 38

Update: Sump off today and the offending part was in the sump, in one piece. There is gauze fitted to the pipe/pump intake so it seems it couldnt go any further.

New dipstick fitted, will be more careful in future.

7th May 2014 5:16pm

LR90XS2011

Member Since: 05 Apr 2011
Location: bickenhill
Posts: 3641

2011 Defender 90 Puma 2.4 XS CSW Galway Green

Glad your sorted DEFENDER 90 TDCI XS,

I hope everyone is well and your land rovers make you happy

7th May 2014 6:22pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum