DEFENDER2.NET - View topic - Clutch kit, which one to buy?

↓ Advertise on Defender2 ↓

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Puma (Tdci) > Clutch kit, which one to buy?

Page 1 of 1

Print this entire topic ·

loki

Member Since: 12 Mar 2013
Location: Pula
Posts: 16

2007 Defender 110 Puma 2.4 CSW Belize Green

Clutch kit, which one to buy?

Hi,
I know thats a frequent topic but I really don't know which clutch kit to buy.
Last year I replaced 2 clutches . The first Borg & Back it lasts less than 2 months before it starts to be noise and vibrating while I was going uphill. The second that is still on my car is a AP2 driveline . This one was better but during the last month it started also to be noise and while changing the gear it isn't so smooth any more.
So my question is which one at your opinion should be a better schoice ? should I buy a genuine land rover?
I tried also to find a reinforced clutch but it seems theres no one for the puma.
Thank you

17th Apr 2014 6:11pm

bga86

Member Since: 17 Jan 2014
Location: Here and there
Posts: 205

I only ever fit genuine clutches to customers pumas, the latest one has been modified to prevent the spring rattling noise I believe. Will be doing my own with a genuine unit in the next two weeks

18th Apr 2014 5:15pm

loki

Member Since: 12 Mar 2013
Location: Pula
Posts: 16

Thank you for you answer .
How do you prevent spring rattling , how do you modify it?
When you fit a new clutch do you replace also the slave cylinder , Ill never replaced it and I have now 150 000 km.

18th Apr 2014 5:24pm

bga86

Member Since: 17 Jan 2014
Location: Here and there
Posts: 205

The springs are already modified by the supplier think the centre of the friction plate casting is much stronger too. Yes I always replace the slave cylinder

18th Apr 2014 6:48pm

MK

Member Since: 28 Aug 2008
Location: Santiago
Posts: 2414

2007 Defender 110 Puma 2.4 SW Chawton White

since LR built so many versions of the clutch, which are still on the market, make sure you get the latest type (part number) Puma 110" SW

.............................................................
Earth first. Other planets later

18th Apr 2014 10:45pm

loki

Member Since: 12 Mar 2013
Location: Pula
Posts: 16

Which is the part number for the latest version of the clutch ?
Du yo have any suggestion where to buy the genuine clutch ?

19th Apr 2014 7:26pm

MK

Member Since: 28 Aug 2008
Location: Santiago
Posts: 2414

LR037956 or LR048731. NOt sure anymore which one is the latest. Check with any known (web) supplier. Puma 110" SW

.............................................................
Earth first. Other planets later

19th Apr 2014 9:04pm

spudfan

Member Since: 10 Sep 2007
Location: Co Donegal
Posts: 4646

My clutch was replaced last month by a maindealer and the invoice says clutch assembly LLR048731. 1982 88" 2.25 diesel
1992 110 200tdi csw -Zikali
2008 110 2.4 tdci csw-Zulu
2011 110 2.4 tdci csw-Masai

19th Apr 2014 10:51pm

dilukabey

Member Since: 17 May 2011
Location: Sri Lanka
Posts: 173

2009 Defender 110 Puma 2.4 SW Keswick Green

I recently replaced my clutch kit and bought all from OEM brands. The clutch kit was AP drive and the slave cylinder was Borg and Beck. I think when the new part number arrives it will be superceded anyway to the latest? Refer the microcat.Cheers.

Kind regards,
Diluk

20th Apr 2014 8:17am

Dieselhead

Member Since: 21 Oct 2012
Location: Pulborough. West Sussex
Posts: 552

Just fitted an AP clutch kit in mine on Sat inc slave cylinder

What a difference in the drive

No more clonk & bangs etc. Happy so far

Also fitted the same kit in a mates 110 less than a month ago. Over 3k later now, hes very happy also

Both clutch plates in each vehical the springs were just about to pop out. Worse in mine & has done 30k less Chris

2008 XS 110 2.4 Utility. Tonga Green
1953 Series 1 for restoration
1983 Mini Mayfair
2004 VW T5 Camper
2008 Diahatsu Sirion. Thats hers
Classic Bolens Garden Tractors

20th Apr 2014 6:53pm

loki

Member Since: 12 Mar 2013
Location: Pula
Posts: 16

Maybe I still have problems with my clutch because I didn't replaced the slave cylinder . When I'm changing gear it isn't going so smooth as it used to be . I'll try now with an genuine clutch and new slave cylinder , maybe this time I'll have more luck , Thank you all for your suggestions

22nd Apr 2014 2:59pm

Page 1 of 1

All times are GMT

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum