Home > My Defender > What Did You Do In Your Defender Today |
|
|
mk1collector Member Since: 17 Sep 2009 Location: West Yorkshire Posts: 6769 |
The leak was caused basically by the a post to roof bolt coming out which allowed the roof to flex more than it should and crack sealer around the front of the rain gutter and front of the roof. I first though it was the door seal so headed down the wrong path and there was a small leak from the windscreen block gaskets that had been replaced earlier this year, so with drying times for sealer and stripping out the head lining it's taken three days (on and off) so far and I'm not rebuilding until we've had some more rain, just to be sure
|
||
14th Jan 2014 9:34pm |
|
Greannach Member Since: 30 Oct 2013 Location: Scotland Posts: 18 |
Well its not really what I did in my Defender, its what I did with it. I jumpstarted a poor wet, cold, miserable motorcyclist in the Tesco car park in Abingdon, Oxford. He was about to give up hope, then he saw me arrive, and thought that I may just have jump leads somewhere in the Tank! Needles to say there was a very grateful motorcyclist and a new land rover fan leaving Tesco tonight. Zermatt Silver 2.4 (with Alive stage 1 remap) TDCi 110 Double Cab Pick Up
Everything in life is somewhere else, and you get there in a Landrover. |
||
14th Jan 2014 10:31pm |
|
custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20324 |
Thought about fitting a bit more of the bolt kit but haven't bothered because the weather is a bit unpredictable.
It's my birthday today and only had just one card from mum, must be the most un-popular person in the country. âï¸âï¸God Bless the USA 🇬🇧🇺🇸 âï¸âï¸ |
||
15th Jan 2014 3:07pm |
|
keith Member Since: 15 Aug 2012 Location: Edinburgh Posts: 2212 |
Happy birthday to you mate .
|
||
15th Jan 2014 3:28pm |
|
bm52 Member Since: 04 Apr 2010 Location: Kent Posts: 2189 |
@ Custom steve
happy birthday, another year older and wiser BM52 |
||
15th Jan 2014 3:49pm |
|
custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20324 |
Thanks chaps, I don't think at the grand old age of 22 I have much to complain about age wise. âï¸âï¸God Bless the USA 🇬🇧🇺🇸 âï¸âï¸
|
||
15th Jan 2014 4:23pm |
|
9t Member Since: 09 Nov 2013 Location: Johannesburg Posts: 108 |
22 years old and 7719 posts! You must have been driving Defenders from the age of 3!
Happy birthday Steve, we'll be your friends! '13 Defender 90 '10 Freelander '13 BMW R1200GS '62 Triang Tricycle Previously '04 R1150RT; '11 F650GS; '98 Defender 110; '03 Defender 90; '02 Freelander |
||
15th Jan 2014 5:38pm |
|
SailingTom Member Since: 19 Nov 2013 Location: ESSEX Posts: 1720 |
Happy Birthday Steve
Agree with the others, thought you must have been an old bloke who likes his music Defender puma dormobile camper |
||
15th Jan 2014 5:52pm |
|
custom90 Member Since: 21 Jan 2010 Location: South West, England. Posts: 20324 |
I think we have about 18 year olds to 80 year olds on here frankly. âï¸âï¸God Bless the USA 🇬🇧🇺🇸 âï¸âï¸
|
||
15th Jan 2014 7:01pm |
|
9t Member Since: 09 Nov 2013 Location: Johannesburg Posts: 108 |
Absolutely true - testimony to the wide and timeless appeal of the Defender. '13 Defender 90
'10 Freelander '13 BMW R1200GS '62 Triang Tricycle Previously '04 R1150RT; '11 F650GS; '98 Defender 110; '03 Defender 90; '02 Freelander |
||
15th Jan 2014 7:07pm |
|
Richalot Member Since: 02 Nov 2013 Location: Norfolk Posts: 37 |
Happy birthday Steve The closer you are to death the more alive you feel |
||
15th Jan 2014 7:30pm |
|
Alex1976 Member Since: 23 Jan 2013 Location: Buckingham Posts: 596 |
today I discovered how easy it can be to remove a steering drop arm ......... when you have the right tools.
I bought a drop arm removal tool from HNJ Engineering - a small firm down in Bristol who make special tools for Landrovers. OK it cost £124 but it was worth it! I applied WD40 liberally and then wound up the removal tool gently increasing the pressure applied. Within two minutes with no fuss whatsoever the arm slipped off. Very pleased with it! Now I can get on and fit my Gwyn Lewis drop arm conversion kit. |
||
15th Jan 2014 7:33pm |
|
DingoDad Member Since: 02 Jan 2014 Location: Norwich Posts: 20 |
Not what I have done today but what I will tomorrow.
Yup on thurs I pick up my beaten up 110 . It's been in getting the light bar and lights wired in along with a Dab stereo, front and rear speakers and an amp. All this plus a whole load of niggling repairs. The team at JSF have been great and kept me updated. 15 hours and counting..... Am like a kid at xmas 94 Defender 110 Wagon 2012 Mini Countryman SD (Work Car) |
||
15th Jan 2014 7:37pm |
|
Offroad-Tec Member Since: 28 Jul 2012 Location: Damshagen/ Baltic Sea Posts: 58 |
Yesterday I picked up my fuji white headlamp surrounds. I'll fit them this weekend.
Click image to enlarge Greetings - Markus |
||
17th Jan 2014 4:55am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis